iCAx开思网

标题: 有谁用群基加工中心...或MELDAS60s的进来....撞刀了... [打印本页]

作者: fzci 时间: 2004-4-28 09:50
标题: 有谁用群基加工中心...或MELDAS60s的进来....撞刀了...
帮忙看看..........这几句有什么问题...........

Z-5.
G01Y-45.1Z-5.125
X-37.5Z-6.
X-28.8
X-20.8F100.
Y-41.7F200.
X-24.8F100.
X-46.2F200.
X-54.2F100.
Y-45.1F200.
X-50.2F100.
X-37.5F200.
G00Z10.
(*** End Of Path PLANAR_MILL_COPY_COPY_1_COPY ***)
(*** Start path: PLANAR_MILL_COPY_COPY_COPY~1 with tool: D16 ***)
X-39.043Y-.702
Z-13.2
G01X-38.929Y-.915Z-13.213F200.
X-38.758Y-1.139Z-13.227
X-38.566Y-1.321Z-13.241
X-38.365Y-1.461Z-13.254
X-38.095Y-1.59Z-13.27
X-37.84Y-1.664Z-13.284
X-37.549Y-1.698Z-13.299
X-37.218Y-1.673Z-13.317
X-36.926Y-1.596Z-13.332
X-36.641Y-1.462Z-13.349
X-36.38Y-1.273Z-13.366
X-36.158Y-1.037Z-13.383
X-35.987Y-.766Z-13.4
X-35.872Y-.477Z-13.416
X-35.814Y-.186Z-13.432

作者: fzci 时间: 2004-4-28 09:50
传到机床那边......红色那句会漏掉............

换另一台机床同一个厂商同一种系统的,,却一点事也没有...................电话厂商那边说偶们传输电脑是WIN2K的原因.................晕.......

可是偶一直都用2K的呀..........而且把
(*** End Of Path PLANAR_MILL_COPY_COPY_1_COPY ***)
(*** Start path: PLANAR_MILL_COPY_COPY_COPY~1 with tool: D16 ***)
这两句DEL又没事了.............

作者: abkk 时间: 2004-4-28 10:12
偶以前一般在开头注解漏掉一两字.机子会报警.
在注解后加两行空行后没发生过.

欢迎光临 iCAx开思网 (https://www.icax.org/)