标题: 怎样设置才能使从CATIA中导出的*.CMD文件导入ADAMS2003中 [打印本页] 作者: sadsad 时间: 2004-6-17 18:35 标题: 怎样设置才能使从CATIA中导出的*.CMD文件导入ADAMS2003中 怎样设置才能从CATIA中导出的*.CMD文件导入ADAMS2003中?
我导入时ADAMS2003报错,如下:
ERROR: Could not successfully open the dataset file.
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 19, character 60 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR: No Marker named 'model1' was found.
ERROR: The command was not executed.
ERROR: &> marker_name = .model1.Shaft.marker_39_12_Shaft_SHELL1 &
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 24, character 60 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR: No Marker named 'model1' was found.
ERROR: The command was not executed.
ERROR: &> marker_name = .model1.Shaft.marker_39_12_Shaft_SHELL1 &
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 28, character 39 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR: No Shell named 'model1' was found.
ERROR: The command was not executed.
ERROR: &> shell_name = .model1.Shaft.SHELL39 &
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 40, character 43 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR: No Geometry named 'model1' was found.
ERROR: The command was not executed.
ERROR: &> geometry_name = .model1.Shaft.SHELL39 &
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 45, character 60 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR: No Marker named 'model1' was found.
ERROR: The command was not executed.
ERROR: &> marker_name = .model1.Shaft.marker_40_12_Shaft_SHELL1 &
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 50, character 60 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR: No Marker named 'model1' was found.
ERROR: The command was not executed.
ERROR: &> marker_name = .model1.Shaft.marker_40_12_Shaft_SHELL1 &
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 54, character 39 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR: No Shell named 'model1' was found.
ERROR: The command was not executed.
ERROR: &> shell_name = .model1.Shaft.SHELL40 &
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 60, character 43 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR: No Geometry named 'model1' was found.
ERROR: The command was not executed.
ERROR: &> geometry_name = .model1.Shaft.SHELL40 &
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 65, character 60 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR: No Marker named 'model1' was found.
ERROR: The command was not executed.
ERROR: &> marker_name = .model1.Shaft.marker_41_12_Shaft_SHELL1 &
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 70, character 60 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR: No Marker named 'model1' was found.
ERROR: The command was not executed.
ERROR: &> marker_name = .model1.Shaft.marker_41_12_Shaft_SHELL1 &
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 74, character 39 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR: No Shell named 'model1' was found.
ERROR: The command was not executed.
ERROR: &> shell_name = .model1.Shaft.SHELL41 &
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 80, character 43 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR: No Geometry named 'model1' was found.
ERROR: The command was not executed.
ERROR: &> geometry_name = .model1.Shaft.SHELL41 &
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 85, character 56 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR: No Marker named 'model1' was found.
ERROR: The command was not executed.
ERROR: &> marker_name = .model1.Arm.marker_42_12_Arm_SHELL1 &
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 90, character 56 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR: No Marker named 'model1' was found.
ERROR: The command was not executed.
ERROR: &> marker_name = .model1.Arm.marker_42_12_Arm_SHELL1 &
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 94, character 37 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR: No Shell named 'model1' was found.
ERROR: The command was not executed.
ERROR: &> shell_name = .model1.Arm.SHELL42 &
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 106, character 41 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR: No Geometry named 'model1' was found.
ERROR: The command was not executed.
ERROR: &> geometry_name = .model1.Arm.SHELL42 &
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 111, character 60 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR: No Marker named 'model1' was found.
ERROR: The command was not executed.
ERROR: &> marker_name = .model1.Crank.marker_43_12_Crank_SHELL1 &
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 116, character 60 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR: No Marker named 'model1' was found.
ERROR: The command was not executed.
ERROR: &> marker_name = .model1.Crank.marker_43_12_Crank_SHELL1 &
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 120, character 39 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR: No Shell named 'model1' was found.
ERROR: The command was not executed.
ERROR: &> shell_name = .model1.Crank.SHELL43 &
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 132, character 43 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR: No Geometry named 'model1' was found.
ERROR: The command was not executed.
ERROR: &> geometry_name = .model1.Crank.SHELL43 &
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 137, character 60 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR: No Marker named 'model1' was found.
ERROR: The command was not executed.
ERROR: &> marker_name = .model1.Link1.marker_44_12_Link1_SHELL1 &
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 142, character 60 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR: No Marker named 'model1' was found.
ERROR: The command was not executed.
ERROR: &> marker_name = .model1.Link1.marker_44_12_Link1_SHELL1 &
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 146, character 39 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR: No Shell named 'model1' was found.
ERROR: The command was not executed.
ERROR: &> shell_name = .model1.Link1.SHELL44 &
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 158, character 43 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR: No Geometry named 'model1' was found.
ERROR: The command was not executed.
ERROR: &> geometry_name = .model1.Link1.SHELL44 &
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 163, character 60 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR: No Marker named 'model1' was found.
ERROR: The command was not executed.
ERROR: &> marker_name = .model1.Link2.marker_45_12_Link2_SHELL1 &
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 168, character 60 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR: No Marker named 'model1' was found.
ERROR: The command was not executed.
ERROR: &> marker_name = .model1.Link2.marker_45_12_Link2_SHELL1 &
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 172, character 39 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR: No Shell named 'model1' was found.
ERROR: The command was not executed.
ERROR: &> shell_name = .model1.Link2.SHELL45 &
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 184, character 43 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR: No Geometry named 'model1' was found.
ERROR: The command was not executed.
ERROR: &> geometry_name = .model1.Link2.SHELL45 &
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 189, character 62 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR: No Marker named 'model1' was found.
ERROR: The command was not executed.
ERROR: &> marker_name = .model1.Collar.marker_46_12_Collar_SHELL1 &
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 194, character 62 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR: No Marker named 'model1' was found.
ERROR: The command was not executed.
ERROR: &> marker_name = .model1.Collar.marker_46_12_Collar_SHELL1 &
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 198, character 40 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR: No Shell named 'model1' was found.
ERROR: The command was not executed.
ERROR: &> shell_name = .model1.Collar.SHELL46 &
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 210, character 44 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR: No Geometry named 'model1' was found.
ERROR: The command was not executed.
ERROR: &> geometry_name = .model1.Collar.SHELL46 &
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 215, character 64 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR: No Marker named 'model1' was found.
ERROR: The command was not executed.
ERROR: &> marker_name = .model1.Cardian.marker_47_12_Cardian_SHELL1 &
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 220, character 64 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR: No Marker named 'model1' was found.
ERROR: The command was not executed.
ERROR: &> marker_name = .model1.Cardian.marker_47_12_Cardian_SHELL1 &
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 224, character 41 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR: No Shell named 'model1' was found.
ERROR: The command was not executed.
ERROR: &> shell_name = .model1.Cardian.SHELL47 &
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 236, character 45 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR: No Geometry named 'model1' was found.
ERROR: The command was not executed.
ERROR: &> geometry_name = .model1.Cardian.SHELL47 &
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 241, character 35 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR: No Model named 'model1' was found.
ERROR: The command was not executed.
ERROR: &> model_name = .model1 &
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 246, character 26 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR: No Model named 'model1' was found.
ERROR: The command was not executed.
ERROR: &> model_name = .model1 &
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 264, character 17 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR: No Model named 'model1' was found.
ERROR: The command was not executed.
ERROR: &> model = model1
ERROR: ---------------------------------------------------------------------
请各位帮忙解决,谢谢作者: wlx2002 时间: 2004-6-26 22:12
你的出错文件贴的太长了!你把ADAMS的工作目录设置到你存放*.CMD文件的目录,就可以了。因为ADAMS调入CMD文件时,还要读入其他相关文件。作者: sadsad 时间: 2004-6-27 10:02
我已经解决掉了
不过还是要谢谢你的回复
谢谢
^_^作者: vincent_chan 时间: 2004-9-16 18:32
catia能够直接导出cmd文件么?还是用了什么接口软件啊?sadsad ,指点一下吧。作者: freshsandy 时间: 2004-11-29 14:37
对阿。什么接口啊?作者: sadsad 时间: 2004-11-30 10:06
就是这个接口
應用:
-線性靜力分析,模態分析,屈曲分析
-熱分析
-非線性分析
-多體動力學模擬
-對於MSC.Nastran, MSC.Marc, ABAQUS, , ANSYS 和STEP AP209實現雙向互操作作者: huda 时间: 2004-12-2 19:48
这模块怎么使用!在那下!楼上的能否说详细点!他们怎么连接?谢谢QQ:94183358作者: 030120425 时间: 2008-9-19 16:33 标题: 我CATIA中导出的*.CMD文件导入ADAMS2007中出错了??????? ---------------------------------------------------------------------
ERROR: Error detected on line number 17, character 18 of E:/adams exsicise/view/body.cmd.
ERROR: The Model 'model1' already exists.
ERROR: The command was not executed.
ERROR: &> model = model1 &
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 21, character 66 of E:/adams exsicise/view/body.cmd.
ERROR: No Marker was found because 'cheboy_1' does not exist beneath '.model1'.
ERROR: The command was not executed.
ERROR: &> marker_name = .model1.cheboy_1.marker_1_body_cheboy_1_SHELL &
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 26, character 66 of E:/adams exsicise/view/body.cmd.
ERROR: No Marker was found because 'cheboy_1' does not exist beneath '.model1'.
ERROR: The command was not executed.
ERROR: &> marker_name = .model1.cheboy_1.marker_1_body_cheboy_1_SHELL &
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 30, character 41 of E:/adams exsicise/view/body.cmd.
ERROR: No Shell was found because 'cheboy_1' does not exist beneath '.model1'.
ERROR: The command was not executed.
ERROR: &> shell_name = .model1.cheboy_1.SHELL1 &
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 36, character 36 of E:/adams exsicise/view/body.cmd.
ERROR: The Color 'DDM_1' already exists.
ERROR: The command was not executed.
ERROR: &> color_name = .colors.DDM_1 &
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 42, character 45 of E:/adams exsicise/view/body.cmd.
ERROR: No Geometry was found because 'cheboy_1' does not exist beneath '.model1'.
ERROR: The command was not executed.
ERROR: &> geometry_name = .model1.cheboy_1.SHELL1 &
ERROR: ---------------------------------------------------------------------