iCAx开思网

标题: 请高手指点 [打印本页]

作者: lgen1218003 时间: 2005-3-26 19:22
标题: 请高手指点
我以用是用2001版的,现在刚用野火版,但界面全变了,好多以前用的命令都不知道哪里去了,哪位高手能告诉我一下吗?特别是曲线和曲面命令.急用!

作者: lgen1218003 时间: 2005-3-26 19:24
我以用是用2001版的,现在刚用野火版,但界面全变了,好多以前用的命令都不知道哪里去了,哪位高手能告诉我一下吗?特别是曲线和曲面命令.急用!我的QQ:410738133谢了.

作者: xjjy 时间: 2005-3-26 19:39
PRO/E部分命令对照LIST (PRO/E ProE2001  _to_wf2)
资料来源：https://www.ptc.com/community/proewf2/menu_mapper/en/index.htm

part (建模部分)

Wildfire 2.0 : Edit > Solidify
ProE2001 : Feature > Create > Solid > Cut > Use Quilt > Solid

Wildfire 2.0 : Edit > Thicken
ProE2001 : Feature > Create > Solid > Cut > Use Quilt > Thin

Wildfire 2.0 : Insert > Hole
ProE2001 : Feature > Create > Solid > Hole

Wildfire 2.0 : Insert > Variable Section Sweep
ProE2001 : Feature > Create > Solid > Cut > Advanced > Solid > Var Sec Swp

Wildfire 2.0 : Edit > Solidify
ProE2001 : Feature > Create > Solid > Protrusion > Use Quilt > Solid

Wildfire 2.0 : Edit > Thicken
ProE2001 : Feature > Create > Solid > Protrusion > Use Quilt > Thin

Wildfire 2.0 : Insert > Variable Section Sweep
ProE2001 : Feature > Create > Solid > Protrusion > Advanced > Solid > Var Sec Swp

Wildfire 2.0 : Insert > Advanced > Radius Dome...
ProE2001 : Feature > Create > Solid > Tweak > Radius Dome

Wildfire 2.0 : Edit > Offset
ProE2001 : Feature > Create > Solid > Tweak > Offset

Wildfire 2.0 : Edit > Offset > Replace Surface Feature
ProE2001 : Feature > Create > Solid > Tweak > Replace

Wildfire 2.0 : Insert > Advance > Ear...
ProE2001 : Feature > Create > Solid > Tweak > Ear

Wildfire 2.0 : Insert > Advanced > Toroidal Bend
ProE2001 : Feature > Create > Solid > Tweak > Toroidal Bend

Wildfire 2.0 : Insert > Advanced > Spinal Bend
ProE2001 : Feature > Create > Solid > Tweak > Spinal Bend

Wildfire 2.0 : Insert > Advanced > Bend Solid
ProE2001 : Feature > Create > Solid > Tweak > Solid Bend

Wildfire 2.0 : Insert > Advanced > Flatten Quilt
ProE2001 : Feature > Create > Solid > Tweak > Flatten Quilt

Wildfire 2.0 : Insert > Sweep > Surface
ProE2001 : Feature > Create > Surface > New > Sweep

Wildfire 2.0 : Insert > Blend > Surface
ProE2001 : Feature > Create > Surface > New > Blend

Wildfire 2.0 : Edit > Fill
ProE2001 : Feature > Create > Surface > New > Flat

Wildfire 2.0 : Edit > Offset
ProE2001 : Feature > Create > Surface > New > Offset

Wildfire 2.0 : Edit > Copy, Edit > Paste
ProE2001 : Feature > Create > Surface > New > Copy

Wildfire 2.0 : Edit > Copy, Edit > Paste

ProE2001 : Feature > Create > Surface > New > Copy by Trim

Wildfire 2.0 : Insert > Round
ProE2001 : Feature > Create > Surface > New > Fillet

Wildfire 2.0 : Insert > Swept Blend > Surface
ProE2001 : Feature > Create > Surface > New > Advanced > Swept Blend

Wildfire 2.0 : Edit > Merge
ProE2001 : Feature > Create > Surface > Merge

Wildfire 2.0 : Insert > Extrude
ProE2001 : Feature > Create > Surface > Trim > Extrude > Solid

Wildfire 2.0 : Insert > Sweep > Surface Trim
ProE2001 : Feature > Create > Surface > Trim > Sweep > Solid

Wildfire 2.0 : Edit > Trim
ProE2001 : Feature > Create > Surface > Trim > Use Quilt > Solid

Wildfire 2.0 : Edit > Trim
ProE2001 : Feature > Create > Surface > Trim > Use Curves

Wildfire 2.0 : Insert > Advanced > Silhouette Trim
ProE2001 : Feature > Create > Surface > Trim > Vertex Round

Wildfire 2.0 : Insert > Advanced > Silhouette Trim
ProE2001 : Feature > Create > Surface > Trim > Silhouette

Wildfire 2.0 : Insert > Variable Section Sweep
ProE2001 : Feature > Create > Surface > Trim > Advanced > Solid > Var Sec Swp

Wildfire 2.0 : Edit > Extend
ProE2001 : Feature > Create > Surface > Extend

Wildfire 2.0 : Edit > Copy, Edit > Paste Special
ProE2001 : Feature > Create > Surface > Transform > Move

Wildfire 2.0 : Edit > Mirror
ProE2001 : Feature > Create > Surface > Transform > Mirror

Wildfire 2.0 : Edit > Flip Normal...
ProE2001 : Feature > Create > Surface > Transform > Flip Normal

Wildfire 2.0 : Insert > Draft
ProE2001 : Feature > Create > Surface > Draft

Wildfire 2.0 : Edit > Offset
ProE2001 : Feature > Create > Surface > Area Offset

Wildfire 2.0 : Edit > Offset
ProE2001 : Feature > Create > Surface > Draft Offset

Wildfire 2.0 : Insert > Shared Data > Copy Geometry from Other Model
ProE2001 : Feature > Create > Data Sharing > Ext Copy Geom

Wildfire 2.0 : Insert > Shared Data > Merge from Other Model
ProE2001 : Feature > Create > Data Sharing > Ext Merge

Wildfire 2.0 : Insert > Shared Data > Cutout from Other Model
ProE2001 : Feature > Create > Data Sharing > Ext Cutout

Wildfire 2.0 : Edit > Feature Operations > Copy
ProE2001 : Feature > Copy

Wildfire 2.0 : Edit > Feature Operations > Group
ProE2001 : Feature > Group

Wildfire 2.0 : Edit > Resume
ProE2001 : Feature > Resume

Wildfire 2.0 : Edit > Read Only
ProE2001 : Feature > Read Only

Wildfire 2.0 : Select the Part name in the Model Tree > Edit > Mirror
ProE2001 : Feature > Mirror Geom

Wildfire 2.0 : Edit > Value
ProE2001 : Modify > Value

Wildfire 2.0 : Edit > Properties
ProE2001 : Modify > Dimension

Wildfire 2.0 : View > View Manager > Simp Rep > New
ProE2001 : Simplfd Rep > Create

Wildfire 2.0 : Edit > Regenerate
ProE2001 : Regenerate

Wildfire 2.0 : Tools > Relations
ProE2001 : Relations

Wildfire 2.0 : Edit > Setup > Units
ProE2001 : Set Up > Units

Wildfire 2.0 : View > View Manager
ProE2001 : X-section

Assembly (组件部分)

Wildfire 2.0 : Insert > Component > Assemble
ProE2001 : Component > Assemble

Wildfire 2.0 : Insert > Component > Create
ProE2001 : Component > Create

Wildfire 2.0 : Edit > Definition
ProE2001 : Component > Redefine

Wildfire 2.0 : Edit > Replace
ProE2001 : Component > Adv Utils > Replace

Wildfire 2.0 : Edit > Component Operations > Merge
ProE2001 : Component > Adv Utils > Merge

Wildfire 2.0 : Edit > Component Operations > Cut Out
ProE2001 : Component > Adv Utils > Cut Out

Wildfire 2.0 : Insert > Component > Include
ProE2001 : Component > Adv Utils > Include

Wildfire 2.0 : Edit > Component Operations > Group
ProE2001 : Component > Adv Utils > Group

Wildfire 2.0 : Insert > Hole
ProE2001 : Feature > Create > Solid > Hole

Wildfire 2.0 : Edit > Activate
ProE2001 : Modify > Mod Part

Wildfire 2.0 : View > View Manager > Simp Rep
ProE2001 : Simplfd Rep

Wildfire 2.0 : View > View Manager > Explode
ProE2001 : Explode State

Wildfire 2.0 : Edit > Setup
ProE2001 : Set Up > Units

Drawing (工程图部分)

Wildfire 2.0 : Insert > Drawing View
ProE2001 : View > Add View
In Pro/ENGINEER Wildfire 2.0, all Drawing View related menu managers have been consolidated into a new, easy to use dialog that gives you visual feedback while you are defining or modifying drawing views. As you advance from section to section, the view on the drawing sheet updates to your latest change. The Drawing View dialog is activated when a new drawing view is created or when an existing drawing view is modified.

Wildfire 2.0 : Click on View and Drag [RMB > Make sure Lock View Movement is unchecked]
ProE2001 : View > Move View

Wildfire 2.0 : Edit > Properties or Double Click a View
ProE2001 : View > Modify View

Wildfire 2.0 : Edit > Delete
ProE2001 : View > Delete View

Wildfire 2.0 : Edit > Group > Relate to View
ProE2001 : View > Relate View

Wildfire 2.0 : Edit > Properties > View Display section of Drawing View dialog
ProE2001 : View > Disp Mode > View Disp

Wildfire 2.0 : View > Drawing Display > Edge Display
ProE2001 : View > Disp Mode > Edge Disp

Wildfire 2.0 : View > Drawing Display > Component Display
ProE2001 : View > Disp Mode > Member Disp

Wildfire 2.0 : File > Properties > Drawing Models
ProE2001 : View > Dwg Models

Wildfire 2.0 : File > Properties > Drawing Options
ProE2001 : Advanced > Draw Setup

作者: 人生如夢 时间: 2005-3-26 20:55
多看幫助文件!

欢迎光临 iCAx开思网 (https://www.icax.org/)