ug17,18的gpm.exe 有问题，大家要小心！

ug17,18的gpm.exe 有问题，大家要小心！

什么问题？

TOOL PATH/PLANAR_MILL,TOOL,MILL
TLDATA/MILL,30.0000,0.0000,75.0000,0.0000,0.0000
MSYS/-44.7115,-5.6939,0.0000,1.0000000,0.0000000,0.0000000,0.0000000,1.0000000,0.0000000
PAINT/PATH
PAINT/SPEED,10
SPINDL/RPM,2000,CLW
PAINT/COLOR,186
RAPID
GOTO/0.0000,0.0000,20.0000,0.0000000,0.0000000,1.0000000
RAPID
GOTO/0.0000,0.0000,2.5400
PAINT/COLOR,42
FEDRAT/MMPM,200.0000
GOTO/0.0000,0.0000,0.0000
PAINT/COLOR,31
FEDRAT/1000.0000
GOTO/0.0000,54.2741,0.0000
GOTO/103.1208,54.2741,0.0000
GOTO/103.1208,0.0000,0.0000
GOTO/0.0000,0.0000,0.0000
PAINT/COLOR,37
FEDRAT/500.0000
GOTO/0.0000,0.0000,2.5400
PAINT/COLOR,211
RAPID
GOTO/0.0000,0.0000,20.0000
rewind
PAINT/SPEED,10
PAINT/TOOL,NOMORE
END-OF-PATH
  
用16版的gpm.exe后处理上述cls文件如下
G21
G90S2000M03
G00Z20.
X0.Y0.
Z2.54
G01Z0.F200.
Y54.274F1000.
X103.121
Y0.
X0.
Z2.54F500.
G00Z20.
M30
  
用17，18用16版的gpm.exe后处理上述cls文件如下
G21
G90S2000M03
G00Z20.
Z2.54
G01Z0.F200.
Y54.274F1000.
X103.121
Y0.
X0.
Z2.54F500.
G00Z20.
M30
  
开头少了，x0.y0.
你们试试是不是这样！