标题: 请问高手 [打印本页] 作者: chinaawen 时间: 2005-10-14 09:25 标题: 请问高手 MOLDFLOW中在哪设置冷却时间，还有过程参数设置好象与实际注塑工艺不太一样，请多指教。作者: doufacezhao 时间: 2005-10-15 11:34
the cooling time setup in the process setting
the parameter setting in mold-flow is not exactly the sam as the injection machine .so you must judge the result for experience.you must select the parameter close the machine as good.