iCAx开思网

标题: 在线求助max dwg格式转换为prt格式的方法？ [打印本页]

作者: 3dmade 时间: 2006-1-15 22:17
标题: 在线求助max dwg格式转换为prt格式的方法？
在线求助max dwg格式转换为prt格式的方法？
QQ：4330058

作者: 3dmade 时间: 2006-1-16 19:59
标题: 直接转换时，很小的模型可以转换，模型一大就出错？怎么回事？
直接转换时，很小的模型可以转换，模型一大就出错？怎么回事？

作者: 3dmade 时间: 2006-1-16 20:53
标题: 是这样的提示图片：
是这样的提示图片：

作者: 3dmade 时间: 2006-1-16 21:07
标题: log文件如下：
While reading dxf file tmp_dwg.dxf
the following unsupported items were encountered:

line number 848: Unknown group code: 370.
line number 860: Unknown group code: 290.
line number 876: Unknown group code: 290.
line number 880: Unknown group code: 380.
line number 884: Unknown group code: 290.
line number 896: Unknown group code: 290.
line number 1474: Unknown group code: 290.
line number 1476: Unknown group code: 370.
line number 1478: Unknown group code: 390.
line number 1496: Unknown group code: 290.
line number 1498: Unknown group code: 370.
line number 1500: Unknown group code: 390.
line number 1792: Unknown group code: 277.
line number 1794: Unknown group code: 278.
line number 1796: Unknown group code: 279.
line number 1826: Unknown group code: 371.
line number 1828: Unknown group code: 372.
line number 14606: Unknown group code: 390.
line number 14632: Unknown group code: 390.
line number 14646: Unknown group code: 390.
line number 14674: Unknown group code: 390.
line number 135600: Entity thickness is not implemented.
line number 400436: Entity thickness is not implemented.
line number 400470: Entity thickness is not implemented.
line number 1181964: Entity thickness is not implemented.
line number 1181998: Entity thickness is not implemented.
line number 1317804: Entity thickness is not implemented.
line number 2137432: Entity thickness is not implemented.
line number 2137466: Entity thickness is not implemented.
line number 2394418: Entity thickness is not implemented.
line number 2394452: Entity thickness is not implemented.
line number 3164802: Entity thickness is not implemented.
line number 3164836: Entity thickness is not implemented.
line number 3198840: Entity thickness is not implemented.
line number 3198874: Entity thickness is not implemented.
line number 3358604: Entity thickness is not implemented.
line number 3358638: Entity thickness is not implemented.

作者: 3dmade 时间: 2006-1-17 00:17
标题: 先在CAD中转换为dxf后再在PROE中转换LOG文件提示错误如下：
先在CAD中转换为dxf后再在PROE中转换LOG文件提示错误如下：
While reading dxf file D:\0116w.dxf
the following unsupported items were encountered:

line number 848: Unknown group code: 370.
line number 860: Unknown group code: 290.
line number 876: Unknown group code: 290.
line number 880: Unknown group code: 380.
line number 884: Unknown group code: 290.
line number 896: Unknown group code: 290.
line number 904: Unknown group code: 290.
line number 1204: Unknown group code: 370.
line number 1206: Unknown group code: 390.
line number 1226: Unknown group code: 370.
line number 1228: Unknown group code: 390.

作者: 3dmade 时间: 2006-1-17 00:18
标题: 谁知道这些错误怎么解决？？？
谁知道这些错误怎么解决？？？

欢迎光临 iCAx开思网 (https://www.icax.org/)