Allocating memory for analysis...
... finished allocating memory
Processing fusion mesh...
... finished processing fusion mesh
Reading input data...
File name : aw56202-00f_study~1
Reading solver parameters...
Reading material data...
Reading process settings...
Reading finite element mesh...
Reading cooling data...
NOTE: In the analysis sequence for this study, a cooling analysis has not
been run before the flow analysis. The flow analysis will use the
constant mold temperature setting in the Process Settings Wizard.
Running a cooling analysis before flow provides more detailed information
about mold temperatures and heat fluxes.
Finished reading input data
No mesh for the cores was found.
Core shift analysis switched OFF
Checking input data...
** ERROR 99780 ** Zero diameter/thickness for element 94889 . An element
must have a non-zero value for the diameter or
thickness. Identify this element and
use an appropriate value for the diameter or thickness,
re-mesh the part, and re-run the analysis.
** ERROR 99780 ** Zero diameter/thickness for element 94890 . An element
must have a non-zero value for the diameter or
thickness. Identify this element and
use an appropriate value for the diameter or thickness,
re-mesh the part, and re-run the analysis.
** ERROR 99780 ** Zero diameter/thickness for element 94892 . An element
must have a non-zero value for the diameter or
thickness. Identify this element and
use an appropriate value for the diameter or thickness,
re-mesh the part, and re-run the analysis.
** ERROR 99780 ** Zero diameter/thickness for element 94893 . An element
must have a non-zero value for the diameter or
thickness. Identify this element and
use an appropriate value for the diameter or thickness,
re-mesh the part, and re-run the analysis.
** ERROR 99780 ** Zero diameter/thickness for element 94894 . An element
must have a non-zero value for the diameter or
thickness. Identify this element and
use an appropriate value for the diameter or thickness,
re-mesh the part, and re-run the analysis.
** ERROR 99780 ** Zero diameter/thickness for element 94895 . An element
must have a non-zero value for the diameter or
thickness. Identify this element and
use an appropriate value for the diameter or thickness,
re-mesh the part, and re-run the analysis.
** ERROR 99780 ** Zero diameter/thickness for element 94896 . An element
must have a non-zero value for the diameter or
thickness. Identify this element and
use an appropriate value for the diameter or thickness,
re-mesh the part, and re-run the analysis.
** ERROR 99780 ** Zero diameter/thickness for element 94897 . An element
must have a non-zero value for the diameter or
thickness. Identify this element and
use an appropriate value for the diameter or thickness,
re-mesh the part, and re-run the analysis.
** ERROR 99780 ** Zero diameter/thickness for element 94898 . An element
must have a non-zero value for the diameter or
thickness. Identify this element and
use an appropriate value for the diameter or thickness,
re-mesh the part, and re-run the analysis.
** ERROR 99780 ** Zero diameter/thickness for element 94899 . An element
must have a non-zero value for the diameter or
thickness. Identify this element and
use an appropriate value for the diameter or thickness,
re-mesh the part, and re-run the analysis.
** ERROR 99780 ** Zero diameter/thickness for element 95025 . An element
must have a non-zero value for the diameter or
thickness. Identify this element and
use an appropriate value for the diameter or thickness,
re-mesh the part, and re-run the analysis.
[ 本帖最后由 cbrmbz75 于 2006-8-11 14:41 编辑 ]作者: cbrmbz75 时间: 2006-8-11 14:36
** ERROR 99780 ** Zero diameter/thickness for element 95026 . An element
must have a non-zero value for the diameter or
thickness. Identify this element and
use an appropriate value for the diameter or thickness,
re-mesh the part, and re-run the analysis.
** ERROR 99780 ** Zero diameter/thickness for element 95027 . An element
must have a non-zero value for the diameter or
thickness. Identify this element and
use an appropriate value for the diameter or thickness,
re-mesh the part, and re-run the analysis.
** ERROR 99780 ** Zero diameter/thickness for element 95028 . An element
must have a non-zero value for the diameter or
thickness. Identify this element and
use an appropriate value for the diameter or thickness,
re-mesh the part, and re-run the analysis.
** ERROR 99780 ** Zero diameter/thickness for element 95029 . An element
must have a non-zero value for the diameter or
thickness. Identify this element and
use an appropriate value for the diameter or thickness,
re-mesh the part, and re-run the analysis.
** ERROR 99780 ** Zero diameter/thickness for element 95030 . An element
must have a non-zero value for the diameter or
thickness. Identify this element and
use an appropriate value for the diameter or thickness,
re-mesh the part, and re-run the analysis.
** ERROR 99780 ** Zero diameter/thickness for element 95031 . An element
must have a non-zero value for the diameter or
thickness. Identify this element and
use an appropriate value for the diameter or thickness,
re-mesh the part, and re-run the analysis.
** ERROR 99780 ** Zero diameter/thickness for element 95032 . An element
must have a non-zero value for the diameter or
thickness. Identify this element and
use an appropriate value for the diameter or thickness,
re-mesh the part, and re-run the analysis.
** ERROR 99780 ** Zero diameter/thickness for element 95033 . An element
must have a non-zero value for the diameter or
thickness. Identify this element and
use an appropriate value for the diameter or thickness,
re-mesh the part, and re-run the analysis.
** ERROR 99780 ** Zero diameter/thickness for element 95034 . An element
must have a non-zero value for the diameter or
thickness. Identify this element and
use an appropriate value for the diameter or thickness,
re-mesh the part, and re-run the analysis.
** ERROR 99780 ** Zero diameter/thickness for element 95035 . An element
must have a non-zero value for the diameter or
thickness. Identify this element and
use an appropriate value for the diameter or thickness,
re-mesh the part, and re-run the analysis.
** ERROR 99780 ** Zero diameter/thickness for element 95036 . An element
must have a non-zero value for the diameter or
thickness. Identify this element and
use an appropriate value for the diameter or thickness,
re-mesh the part, and re-run the analysis.
** ERROR 99780 ** Zero diameter/thickness for element 95037 . An element
must have a non-zero value for the diameter or
thickness. Identify this element and
use an appropriate value for the diameter or thickness,
re-mesh the part, and re-run the analysis.
** ERROR 99780 ** Zero diameter/thickness for element 95038 . An element
must have a non-zero value for the diameter or
thickness. Identify this element and
use an appropriate value for the diameter or thickness,
re-mesh the part, and re-run the analysis.
** ERROR 99780 ** Zero diameter/thickness for element 95039 . An element
must have a non-zero value for the diameter or
thickness. Identify this element and
use an appropriate value for the diameter or thickness,
re-mesh the part, and re-run the analysis.
** ERROR 99780 ** Zero diameter/thickness for element 95040 . An element
must have a non-zero value for the diameter or
thickness. Identify this element and
use an appropriate value for the diameter or thickness,
re-mesh the part, and re-run the analysis.
** ERROR 99780 ** Zero diameter/thickness for element 95041 . An element
must have a non-zero value for the diameter or
thickness. Identify this element and
use an appropriate value for the diameter or thickness,
re-mesh the part, and re-run the analysis.
** ERROR 99780 ** Zero diameter/thickness for element 95044 . An element
must have a non-zero value for the diameter or
thickness. Identify this element and
use an appropriate value for the diameter or thickness,
re-mesh the part, and re-run the analysis.
** ERROR 99780 ** Zero diameter/thickness for element 95045 . An element
must have a non-zero value for the diameter or
thickness. Identify this element and
use an appropriate value for the diameter or thickness,
re-mesh the part, and re-run the analysis.
** ERROR 99780 ** Zero diameter/thickness for element 95046 . An element
must have a non-zero value for the diameter or
thickness. Identify this element and
use an appropriate value for the diameter or thickness,
re-mesh the part, and re-run the analysis.
** ERROR 99780 ** Zero diameter/thickness for element 95047 . An element
must have a non-zero value for the diameter or
thickness. Identify this element and
use an appropriate value for the diameter or thickness,
re-mesh the part, and re-run the analysis.
** ERROR 99780 ** Zero diameter/thickness for element 95048 . An element
must have a non-zero value for the diameter or
thickness. Identify this element and
use an appropriate value for the diameter or thickness,
re-mesh the part, and re-run the analysis.
** ERROR 99780 ** Zero diameter/thickness for element 95049 . An element
must have a non-zero value for the diameter or
thickness. Identify this element and
use an appropriate value for the diameter or thickness,
re-mesh the part, and re-run the analysis.
[ 本帖最后由 cbrmbz75 于 2006-8-11 14:42 编辑 ]作者: cbrmbz75 时间: 2006-8-11 14:37
** ERROR 99780 ** Zero diameter/thickness for element 95052 . An element
must have a non-zero value for the diameter or
thickness. Identify this element and
use an appropriate value for the diameter or thickness,
re-mesh the part, and re-run the analysis.
** ERROR 99780 ** Zero diameter/thickness for element 95053 . An element
must have a non-zero value for the diameter or
thickness. Identify this element and
use an appropriate value for the diameter or thickness,
re-mesh the part, and re-run the analysis.
** ERROR 99780 ** Zero diameter/thickness for element 95055 . An element
must have a non-zero value for the diameter or
thickness. Identify this element and
use an appropriate value for the diameter or thickness,
re-mesh the part, and re-run the analysis.
** ERROR 99780 ** Zero diameter/thickness for element 95056 . An element
must have a non-zero value for the diameter or
thickness. Identify this element and
use an appropriate value for the diameter or thickness,
re-mesh the part, and re-run the analysis.
** ERROR 99780 ** Zero diameter/thickness for element 95057 . An element
must have a non-zero value for the diameter or
thickness. Identify this element and
use an appropriate value for the diameter or thickness,
re-mesh the part, and re-run the analysis.
** ERROR 99780 ** Zero diameter/thickness for element 95058 . An element
must have a non-zero value for the diameter or
thickness. Identify this element and
use an appropriate value for the diameter or thickness,
re-mesh the part, and re-run the analysis.
** ERROR 99780 ** Zero diameter/thickness for element 95059 . An element
must have a non-zero value for the diameter or
thickness. Identify this element and
use an appropriate value for the diameter or thickness,
re-mesh the part, and re-run the analysis.
** ERROR 99780 ** Zero diameter/thickness for element 95060 . An element
must have a non-zero value for the diameter or
thickness. Identify this element and
use an appropriate value for the diameter or thickness,
re-mesh the part, and re-run the analysis.
** ERROR 99780 ** Zero diameter/thickness for element 95061 . An element
must have a non-zero value for the diameter or
thickness. Identify this element and
use an appropriate value for the diameter or thickness,
re-mesh the part, and re-run the analysis.
** ERROR 99780 ** Zero diameter/thickness for element 95062 . An element
must have a non-zero value for the diameter or
thickness. Identify this element and
use an appropriate value for the diameter or thickness,
re-mesh the part, and re-run the analysis.
** ERROR 99780 ** Zero diameter/thickness for element 95064 . An element
must have a non-zero value for the diameter or
thickness. Identify this element and
use an appropriate value for the diameter or thickness,
re-mesh the part, and re-run the analysis.
** ERROR 99780 ** Zero diameter/thickness for element 95065 . An element
must have a non-zero value for the diameter or
thickness. Identify this element and
use an appropriate value for the diameter or thickness,
re-mesh the part, and re-run the analysis.
** ERROR 99780 ** Zero diameter/thickness for element 95066 . An element
must have a non-zero value for the diameter or
thickness. Identify this element and
use an appropriate value for the diameter or thickness,
re-mesh the part, and re-run the analysis.
** ERROR 99780 ** Zero diameter/thickness for element 95067 . An element
must have a non-zero value for the diameter or
thickness. Identify this element and
use an appropriate value for the diameter or thickness,
re-mesh the part, and re-run the analysis.
** ERROR 99780 ** Zero diameter/thickness for element 95069 . An element
must have a non-zero value for the diameter or
thickness. Identify this element and
use an appropriate value for the diameter or thickness,
re-mesh the part, and re-run the analysis.
** ERROR 99780 ** Zero diameter/thickness for element 95070 . An element
must have a non-zero value for the diameter or
thickness. Identify this element and
use an appropriate value for the diameter or thickness,
re-mesh the part, and re-run the analysis.
** ERROR 99780 ** Zero diameter/thickness for element 95071 . An element
must have a non-zero value for the diameter or
thickness. Identify this element and
use an appropriate value for the diameter or thickness,
re-mesh the part, and re-run the analysis.
** ERROR 99780 ** Zero diameter/thickness for element 95073 . An element
must have a non-zero value for the diameter or
thickness. Identify this element and
use an appropriate value for the diameter or thickness,
re-mesh the part, and re-run the analysis.
** ERROR 99780 ** Zero diameter/thickness for element 95074 . An element
must have a non-zero value for the diameter or
thickness. Identify this element and
use an appropriate value for the diameter or thickness,
re-mesh the part, and re-run the analysis.
[ 本帖最后由 cbrmbz75 于 2006-8-11 14:44 编辑 ]作者: cbrmbz75 时间: 2006-8-11 14:38
** ERROR 99780 ** Zero diameter/thickness for element 95170 . An element
must have a non-zero value for the diameter or
thickness. Identify this element and
use an appropriate value for the diameter or thickness,
re-mesh the part, and re-run the analysis.
** ERROR 99780 ** Zero diameter/thickness for element 95171 . An element
must have a non-zero value for the diameter or
thickness. Identify this element and
use an appropriate value for the diameter or thickness,
re-mesh the part, and re-run the analysis.
** ERROR 99780 ** Zero diameter/thickness for element 95172 . An element
must have a non-zero value for the diameter or
thickness. Identify this element and
use an appropriate value for the diameter or thickness,
re-mesh the part, and re-run the analysis.
** ERROR 99780 ** Zero diameter/thickness for element 95173 . An element
must have a non-zero value for the diameter or
thickness. Identify this element and
use an appropriate value for the diameter or thickness,
re-mesh the part, and re-run the analysis.
** ERROR 99780 ** Zero diameter/thickness for element 95174 . An element
must have a non-zero value for the diameter or
thickness. Identify this element and
use an appropriate value for the diameter or thickness,
re-mesh the part, and re-run the analysis.
** ERROR 99780 ** Zero diameter/thickness for element 95175 . An element
must have a non-zero value for the diameter or
thickness. Identify this element and
use an appropriate value for the diameter or thickness,
re-mesh the part, and re-run the analysis.
** ERROR 99780 ** Zero diameter/thickness for element 95176 . An element
must have a non-zero value for the diameter or
thickness. Identify this element and
use an appropriate value for the diameter or thickness,
re-mesh the part, and re-run the analysis.
** ERROR 99780 ** Zero diameter/thickness for element 95177 . An element
must have a non-zero value for the diameter or
thickness. Identify this element and
use an appropriate value for the diameter or thickness,
re-mesh the part, and re-run the analysis.
** ERROR 99780 ** Zero diameter/thickness for element 95178 . An element
must have a non-zero value for the diameter or
thickness. Identify this element and
use an appropriate value for the diameter or thickness,
re-mesh the part, and re-run the analysis.
** ERROR 99780 ** Zero diameter/thickness for element 95179 . An element
must have a non-zero value for the diameter or
thickness. Identify this element and
use an appropriate value for the diameter or thickness,
re-mesh the part, and re-run the analysis.
** ERROR 99780 ** Zero diameter/thickness for element 95180 . An element
must have a non-zero value for the diameter or
thickness. Identify this element and
use an appropriate value for the diameter or thickness,
re-mesh the part, and re-run the analysis.
** ERROR 99780 ** Zero diameter/thickness for element 95181 . An element
must have a non-zero value for the diameter or
thickness. Identify this element and
use an appropriate value for the diameter or thickness,
re-mesh the part, and re-run the analysis.
** ERROR 99780 ** Zero diameter/thickness for element 95182 . An element
must have a non-zero value for the diameter or
thickness. Identify this element and
use an appropriate value for the diameter or thickness,
re-mesh the part, and re-run the analysis.
** ERROR 99780 ** Zero diameter/thickness for element 95183 . An element
must have a non-zero value for the diameter or
thickness. Identify this element and
use an appropriate value for the diameter or thickness,
re-mesh the part, and re-run the analysis.
** ERROR 99780 ** Zero diameter/thickness for element 95184 . An element
must have a non-zero value for the diameter or
thickness. Identify this element and
use an appropriate value for the diameter or thickness,
re-mesh the part, and re-run the analysis.
** ERROR 99780 ** Zero diameter/thickness for element 95185 . An element
must have a non-zero value for the diameter or
thickness. Identify this element and
use an appropriate value for the diameter or thickness,
re-mesh the part, and re-run the analysis.
** ERROR 99780 ** Zero diameter/thickness for element 95186 . An element
must have a non-zero value for the diameter or
thickness. Identify this element and
use an appropriate value for the diameter or thickness,
re-mesh the part, and re-run the analysis.
** ERROR 99780 ** Zero diameter/thickness for element 95187 . An element
must have a non-zero value for the diameter or
thickness. Identify this element and
use an appropriate value for the diameter or thickness,
re-mesh the part, and re-run the analysis.
** ERROR 99780 ** Zero diameter/thickness for element 95188 . An element
must have a non-zero value for the diameter or
thickness. Identify this element and
use an appropriate value for the diameter or thickness,
re-mesh the part, and re-run the analysis.
** ERROR 99780 ** Zero diameter/thickness for element 95189 . An element
must have a non-zero value for the diameter or
thickness. Identify this element and
use an appropriate value for the diameter or thickness,
re-mesh the part, and re-run the analysis.
** ERROR 99780 ** Zero diameter/thickness for element 95190 . An element
must have a non-zero value for the diameter or
thickness. Identify this element and
use an appropriate value for the diameter or thickness,
re-mesh the part, and re-run the analysis.
** ERROR 99780 ** Zero diameter/thickness for element 95191 . An element
must have a non-zero value for the diameter or
thickness. Identify this element and
use an appropriate value for the diameter or thickness,
re-mesh the part, and re-run the analysis.
** ERROR 99780 ** Zero diameter/thickness for element 95192 . An element
must have a non-zero value for the diameter or
thickness. Identify this element and
use an appropriate value for the diameter or thickness,
re-mesh the part, and re-run the analysis.
** ERROR 99780 ** Zero diameter/thickness for element 95193 . An element
must have a non-zero value for the diameter or
thickness. Identify this element and
use an appropriate value for the diameter or thickness,
re-mesh the part, and re-run the analysis.
** ERROR 99780 ** Zero diameter/thickness for element 95194 . An element
must have a non-zero value for the diameter or
thickness. Identify this element and
use an appropriate value for the diameter or thickness,
re-mesh the part, and re-run the analysis.
** ERROR 99780 ** Zero diameter/thickness for element 95195 . An element
must have a non-zero value for the diameter or
thickness. Identify this element and
use an appropriate value for the diameter or thickness,
re-mesh the part, and re-run the analysis.
** ERROR 99780 ** Zero diameter/thickness for element 95196 . An element
must have a non-zero value for the diameter or
thickness. Identify this element and
use an appropriate value for the diameter or thickness,
re-mesh the part, and re-run the analysis.
** ERROR 99780 ** Zero diameter/thickness for element 95197 . An element
must have a non-zero value for the diameter or
thickness. Identify this element and
use an appropriate value for the diameter or thickness,
re-mesh the part, and re-run the analysis.
... finished checking input data
** ERROR 99980 ** Correct the above error and re-run the analysis
** ERROR 99002 ** The following error messages occurred more than 5 times: