iCAx开思网

标题: 新人刚接触E7有几个问题请斑竹和各位朋友帮忙看看 [打印本页]

作者: 死亡v骑士 时间: 2006-11-14 19:55
标题: 新人刚接触E7有几个问题请斑竹和各位朋友帮忙看看
大家好最近才刚刚用E7.1学习加工编程有好多不明白的地方请大家帮忙

1，给我们单位编程的人是用的E7.0他送来的程序里带的其中一张图里是一把棒糖刀的加工图但是我想知道他

是怎么在上面标住的刀直径和刀杆直径的？

2，我试者用他那样的棒糖刀计算加工时~~就会提示我切削是刀具路径不会计算槽铣刀/立铣刀

问了些自己决的很是问题的问题，各位千万别笑我`一定要帮帮我

由于刚刚接触Cimatron 有好多地方不懂，以后还请不吝指教

作者: 死亡v骑士 时间: 2006-11-14 20:01
先谢谢大家~~有的地方可能说道不明白~还请大家指出

另外我想知道  IT 的后置里是怎么生成的这样的  加工单的

==============================================================
         drawing_number : ***
=================================================================
No.1    NC file name : ******.E10-1.FAN-38
comment  : No Text
Operator :
--------------------------------------------------------------
proc_No. 1                      proc_type = WCUT
surf_tol.    = 0.03             stock    = 0.3
z_up       = 0.0             down_step = 0.35
z_down       = -50.0
(xm ,ym ,zm)  = ( -31.0    ,-29.0       ,-49.7 )
(xM ,yM ,zM)  = ( 31.0       ,41.0       ,30.0    )
rapid_feed = 148.095    mm | 0.03    min
general_feed  = 132451.385 mm | 360.326 min
&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
Tool_name    = E10             comment: NO TEXT
tool_type    = D10.0_R0.0       tool_length = 52.0
spindle_speed = 1000 rpm          feed       = 350 mm / min.
holder :
--------------------------------------------------------------
(xm ,ym ,zm)  = ( -31.0    ,-29.0       ,-49.7 )
(xM ,yM ,zM)  = ( 31.0       ,41.0       ,30.0    )
rapid_feed = 148.095    mm | 0.03    min.
general_feed  = 132451.385 mm | 360.326 min.
=================================================================
No.2    NC file name : *****.E10-2.FAN-38
comment  : No Text
Operator :
--------------------------------------------------------------
proc_No. 1                      proc_type = WCUT
surf_tol.    = 0.005             stock    = 0.0
z_up       = 0.0             down_step = 0.3
z_down       = -11.5
(xm ,ym ,zm)  = ( -18.303    ,-16.12       ,-11.5 )
(xM ,yM ,zM)  = ( 28.571    ,15.891       ,30.0    )
rapid_feed = 80.485       mm | 0.016    min
general_feed  = 4280.214    mm | 12.326 min
--------------------------------------------------------------
proc_No. 2                      proc_type = WCUT
surf_tol.    = 0.005             stock    = 0.0
z_up       = -11.995          down_step = 0.0
z_down       = -11.995
(xm ,ym ,zm)  = ( -14.6    ,-12.5       ,-11.995  )
(xM ,yM ,zM)  = ( 24.9       ,24.2       ,30.0    )
rapid_feed = 108.74       mm | 0.022    min
general_feed  = 311.415    mm | 0.91    min
--------------------------------------------------------------
proc_No. 3                      proc_type = WCUT
surf_tol.    = 0.005             stock    = 0.0
z_up       = -12.0             down_step = 0.3
z_down       = -49.6
(xm ,ym ,zm)  = ( -18.513    ,-16.347    ,-49.6 )
(xM ,yM ,zM)  = ( 28.845    ,16.131       ,30.0    )
rapid_feed = 129.257    mm | 0.026    min
general_feed  = 16211.283    mm | 46.589 min
--------------------------------------------------------------
proc_No. 4                      proc_type = WCUT
surf_tol.    = 0.005             stock    = 0.0
z_up       = -50.0             down_step = 0.0
z_down       = -50.0
(xm ,ym ,zm)  = ( -29.999    ,-28.001    ,-50.0 )
(xM ,yM ,zM)  = ( 29.999    ,40.001       ,30.0    )
rapid_feed = 218.364    mm | 0.044    min
general_feed  = 663.74       mm | 1.916    min
&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
Tool_name    = E10             comment: NO TEXT
tool_type    = D10.0_R0.0       tool_length = 52.0
spindle_speed = 1000 rpm          feed       = 350 mm / min.
holder :
--------------------------------------------------------------
(xm ,ym ,zm)  = ( -29.999    ,-28.001    ,-50.0 )
(xM ,yM ,zM)  = ( 29.999    ,40.001       ,30.0    )
rapid_feed = 536.847    mm | 0.107    min.
general_feed  = 21466.652    mm | 61.741 min.
=================================================================
(Xm ,Ym ,Zm)  = ( -31.0          ,-29.0       ,-50.0 )
(XM ,YM ,ZM)  = ( 31.0          ,41.0       ,30.0    )
Rapid_Feed = 684.942          mm | 0.137    min.
General_Feed  = 153918.038       mm | 422.066 min.
------------------------- THE END  -------------------------------

作者: yin-chen 时间: 2006-11-15 10:31

原帖由 死亡v骑士 于 2006-11-14 20:01 发表
先谢谢大家~~有的地方可能说道不明白~还请大家指出

另外我想知道 IT 的后置里是怎么生成的这样的加工单的

==============================================================
drawing_num ...

期待！

欢迎光临 iCAx开思网 (https://www.icax.org/)