5X Cavity Cycles
Additional information to the manual (chapter 2.6.6. Tilt angle)
Fixed
In all cycles of the package 5X Cavity cycles, the stilt strategy Fixed (5Axes tab) is automatically licensed for the acquired cycle. For this, no longer an additional license is necessary.
Max. tilt angle
The max. tilt angle is measured to the Z axis of the frame. The maximum tilt angle can be used to prevent the output of tilt angles that exceed the position range of the machine when path smoothing or collision avoidance is activated.
Z axes not parallel to NCS
For the maximum tilt angle, the angle between both Z axes has to be subtracted from the maximum permissible angle of the machine axis.
5X Surface Cycles
5X ISO Top Milling
5 Axes
4+1 Machining
Using this function, you can fix the tilt vector on one of the given main axes (X, Y, Z). Additionally you can define a slope angle to the axis (Default = 90) (SCR 926).
.
5X Swarf cutting 1 curve
Strategy tab
Exact tool path guidance in contact with adjacent rounding surface, if this surface is selected as Bottom surface (SCR 596).
5X Blade Cycles
5X Blade Top Milling
Optionally, a partial machining can be performed. In doing so, the movement can be restricted to 4Axes (SCR 868).
5X Blade Fillet Machining
Parameter tab
If no spiral infeed is desired, the Side allowance option has to be set to 0 (SCR 2087)
5X Multiblade Cycles
Additional information to the manual (chapter 6.3.3. Selecting the Geometry)
Geometry tab
Attention!
Depending on blade data additional definition of Blade skeleton curves might be required.
Blade skeleton curves are optional. They might be required in case of:
- suction as well as pressure side consist of a patch containing short surfaces
- oversized edges whereby they extend into the suction and/or pressure side
- if suction and/or pressure surface include leading and/or trailing edge area (not symmetrically) split to both sides
- if the blades get very close to horizontal at leading and/or trailing edge
Supported operating systems:
- Windows 2000
- Windows XP
- Windows Vista (*)
* To ensure an error-free data exchange within hyperMILL / hyperCAD, the User Account Control has to be deactivated in Windows Vista. To this purpose, proceed as follows: Click Start > Control panel and enter the string User Account Control in the search field. Deactivate the option in the dialog displayed. Then close the dialog. Please note also the terms of the different CAD manufacturers.
Supported CAD platforms:
- hyperCAD 2007.1
- thinkdesign 2007.1
- Inventor 10, 11 and Inventor 2008.
- Pro/ENGINEER Wildfire 2 and 3
- Solid Works 2007 SP4 and 2008 SP1作者: zhangwill 时间: 2007-12-10 00:43
模具加工功能基本没有任何变化，在叶轮叶片以及特殊的4+1上面有所改进及新增一些功能。最主要的一点在于同时支持4个CAD平台，以及可以运行在VISTA上面支持双核双处理器，在V9.6的基础上将全部的功能速度提高30%.作者: project1x 时间: 2007-12-10 20:10
牛！9。6已经很无敌了，又增加不少！相信以后一定有机会体验一下，呵呵！！
