iCAx开思网

标题: CMM双机DMIS [打印本页]

作者: wps267 时间: 2008-3-5 11:13
标题: CMM双机DMIS
请问一下,DMIS中双机的DRIVER,
在CRSLCT/ALL模式定义的面,如何实现用DRIVER测量,
就是主机测2点,从机测2点,在主机中结束测量.

我的程序如下:
CRSLCT/ALL
DMESW/COMAND,'DUALARM/MODE,DRIVER'
MODE/PROG,MAN
RECALL/D(CRD1)
F(PLN3) = FEAT/PLANE,CART, 0,0,0,0,0,1
MEAS/PLANE, F(PLN3), 4
CRSLCT/CR(ARM1)
GOTO/507,3,70
  PTMEAS/CART,  497, 32, 0, 0, 0, 1
  PTMEAS/CART,  497, 3, 0,  0, 0, 1
  GOTO/497,-7,7
CRSLCT/CR(ARM2)
GOTO/-7,3,7
  PTMEAS/CART,  6,32,0,0,0,1
  PTMEAS/CART,  6,3,0,0,0,1
  GOTO/3,-7,7
(CRSLCT/ALL)$$这一句是加上去实验的,加没加都不行
ENDMES

欢迎光临 iCAx开思网 (https://www.icax.org/)