美发剪结构设计实务(AT200) - iCAx开思网

■一.客户提案造型与产品规格(专案定名为AT200)
□1.客户造型设计提案渲染图(义大利工业设计):

[attach]890718[/attach]
Patillera-01

[attach]890719[/attach]
Patillera-02

[attach]890720[/attach]
Patillera-03

[attach]890721[/attach]
Patillera-04

[attach]890722[/attach]
Patillera-05

[attach]890723[/attach]
Patillera-06

[attach]890724[/attach]
Patillera-07

[attach]890725[/attach]
Patillera-08

[attach]890726[/attach]
Patillera-09

★PS:看不到图的兄弟请用单连显示图或下载.rar压缩档:
⊙甲.单连图的网址:
Patillera-01: https://xce.xanga.com/ff1f360620c33235835950/w186291821.jpg
Patillera-02: https://xc3.xanga.com/1eaf370420c32235835941/w186291812.jpg
Patillera-03: https://x7a.xanga.com/867f4a0627237235835977/w186291848.jpg
Patillera-04: https://x32.xanga.com/130f220620c32235835970/w186291841.jpg
Patillera-05: https://xe3.xanga.com/c7ef461020c34235835969/w186291840.jpg
Patillera-06: https://x28.xanga.com/cfcf430607234235835966/w186291837.jpg
Patillera-07: https://x1f.xanga.com/f5bf270a20c35235835962/w186291833.jpg
Patillera-08: https://x1b.xanga.com/722f400627234235835957/w186291828.jpg
Patillera-09: https://x4b.xanga.com/2dcf200a20c32235835952/w186291823.jpg

⊙乙.下载.rar压缩档:
[attach]890545[/attach]

□2.客户提供的3D图档:
[attach]890399[/attach]
[attach]890400[/attach]

□3.客户指定规格书:
A.单颗1.5V(AA)可充式锂电池.
B.使用现有小刀组.
C.使用3mm/6mm/9mm/12mm四种规格分套.
D.马达规格为 "华渊FF-270PA"1.5V.
E.控制使用微动开关.
F.充电座采快充式.
G.机壳采无螺丝卡勾式(刀头卡勾锁2根1.6x8螺丝).
H.机身两侧采软质止滑垫.
I.偏心轮偏心量2.1mm.

■二.整理客户3D造型图档
□1.先用AutoCAD设计"美发/宠物剪"结构正视与上视机身剖面草图
  此时也将客户的3D造型图档以AutoCAD草图导入SolidWorks内重建3D造型做些调整
  AutoCAD设计剖面草图如下:

[attach]890744[/attach]
AT200机身草图.jpg

⊙甲.单连图的网址:
https://xa0.xanga.com/e39f5a1752334235885369/w186332291.jpg

⊙乙.下载.rar压缩档:
[attach]890589[/attach][attach]890590[/attach]

□2.调整完的SolidWorks3D造型图档如下:

[attach]890745[/attach]
调整完的3D造型.jpg

⊙甲.单连图的网址:
https://x84.xanga.com/721f211705032235887524/w186334217.jpg

⊙乙.下载.rar压缩档:
[attach]890591[/attach][attach]890592[/attach]