标题: ADAMS 仿真中遇到的问题 [打印本页] 作者: yingkesong666 时间: 2010-3-26 22:42 标题: ADAMS 仿真中遇到的问题 ERROR: ***** ADAMS MEMORY OVERFLOW *****
A larger MD array is required.
The error occurred in subroutine "SYMFAC" while allocating " INTE" space
from "TEMP" for the "JCOL array".
Space Available: 12421 Space Requested: 51523
ADAMS/Solver requires more program memory to run this model.
Be aware that the above figures for Space available and Space
requested only reflect the current requirements. Additional space
may be required later in the solution process.
Several off-the-shelf memory configurations are available and
custom configurations may be created. The available memory models
and the corresponding array sizes are:
------------------------
NAME MDSIZ
------------------------
STANDARD 1,100,000
LARGE 3,000,000
EX-LARGE 20,000,000
HUGE 60,000,000
where MDSIZ is the size in words (one word is 4 bytes) of the MD array,
the main memory array in ADAMS in words (one word is 4 bytes).
To use an alternative setting, you have to start the ADAMS 'Settings'
program. It can be found using the Start menu: