iCAx开思网

标题: cam开发操作余量获取 [打印本页]

作者: LIUCHANGLIN 时间: 2010-9-9 15:25
标题: cam开发操作余量获取
double stock_part;
UF_PARAM_ask_double_value(group,UF_PARAM_STOCK_PART,&stock_part);

char stock[133];
sprintf(stock,"程序余量是:%0.2f",tool_diam);
uc1601(stock,1);

作者: LIUCHANGLIN 时间: 2010-9-9 15:26
得出的数据很大，根本就不对，为何！那位兄弟知道！

作者: LIUCHANGLIN 时间: 2010-9-9 15:27
char stock[133];
sprintf(stock,"程序余量是:%0.2f",stock_part);
uc1601(stock,1);
上面写错了，不好意思！

作者: LIUCHANGLIN 时间: 2010-9-10 18:27
己解决，现在主轴转速和进给没找到，有知道的说一声，谢谢！

作者: zmhcnc 时间: 2010-9-10 20:30
行不行啊楼主哥哥

作者: qingkongaaa 时间: 2012-12-6 13:16
楼主求学习

作者: icaxhjy88 时间: 2012-12-10 14:58
我来告诉你：
转速是4005。进给是17

UF_PARAM_ask_double_value(oper,4003,&double_t);  //UF_PARAM_SURFACE_SPEED    4003
sprintf(temp,"UF_PARAM_SURFACE_SPEED=：%0.3f",double_t);
list_w(temp);

UF_PARAM_ask_double_value(oper,4004,&double_t);  //UF_PARAM_FEED_PER_TOOTH 4004
sprintf(temp,"UF_PARAM_FEED_PER_TOOTH=：%0.3f",double_t);
list_w(temp);

UF_PARAM_ask_double_value(oper,4005,&double_t);  //UF_PARAM_SPINDLE_RPM 4005
sprintf(temp,"Speed RPM=：%0.3f",double_t);
list_w(temp);

UF_PARAM_ask_int_value(oper,4013,&int_t); //UF_PARAM_SPINDLE_RPM_TOG 4013*  0 -- Inactive 1 -- Active
sprintf(temp,"使用RPM(1：激活)：%d",int_t);
list_w(temp);

UF_PARAM_ask_int_value(oper,4008,&int_t); //UF_PARAM_SPINDLE_MODE 4008
sprintf(temp,"UF_PARAM_SPINDLE_MODE：%d",int_t);
list_w(temp);

UF_PARAM_ask_str_value(oper,4009,char_t); //UF_PARAM_SPINDLE_RANGE_TEXT 4009
sprintf(temp,"Spindle Range text：%s",char_t);
list_w(temp);

UF_PARAM_ask_str_value(oper,4010,char_t); //UF_PARAM_SPINDLE_TEXT    4010
sprintf(temp,"Spindle text：%s",char_t);
list_w(temp);

/* Second Page */

UF_PARAM_ask_subobj_ptr_value(oper,UF_PARAM_FEED_RAPID,&h_feed);  //UF_PARAM_FEED_RAPID 10
sprintf(temp,"RAPID:%0.1f",h_feed.value);
list_w(temp);

UF_PARAM_ask_subobj_ptr_value(oper,UF_PARAM_FEED_APPROACH,&h_feed);  //UF_PARAM_FEED_APPROACH 13
sprintf(temp,"APPROACH:%0.1f",h_feed.value);
list_w(temp);

UF_PARAM_ask_subobj_ptr_value(oper,UF_PARAM_FEED_ENGAGE,&h_feed);  //UF_PARAM_FEED_ENGAGE 11
sprintf(temp,"ENGAGE:%0.1f",h_feed.value);
list_w(temp);

UF_PARAM_ask_subobj_ptr_value(oper,UF_PARAM_FEED_FIRST_CUT,&h_feed); //UF_PARAM_FEED_FIRST_CUT 18
sprintf(temp,"FIRST_CUT:%0.1f",h_feed.value);
list_w(temp);

UF_PARAM_ask_subobj_ptr_value(oper,UF_PARAM_FEED_STEPOVER,&h_feed); //UF_PARAM_FEED_STEPOVER 19
sprintf(temp,"STEPOVER :%0.1f",h_feed.value);
list_w(temp);

UF_PARAM_ask_subobj_ptr_value(oper,UF_PARAM_FEED_CUT,&h_feed); //UF_PARAM_FEED_CUT 17
sprintf(temp,"FEED_CUT:%0.1f",h_feed.value);
list_w(temp);

UF_PARAM_ask_subobj_ptr_value(oper,UF_PARAM_FEED_TRAVERSAL,&h_feed);  //UF_PARAM_FEED_TRAVERSAL 16
sprintf(temp,"TRAVERSAL:%0.1f",h_feed.value);
list_w(temp);

UF_PARAM_ask_subobj_ptr_value(oper,UF_PARAM_FEED_RETRACT,&h_feed);  //UF_PARAM_FEED_RETRACT 12
sprintf(temp,"RETRACT:%0.1f",h_feed.value);
list_w(temp);

UF_PARAM_ask_subobj_ptr_value(oper,UF_PARAM_FEED_RETURN,&h_feed);  //UF_PARAM_FEED_RETURN 15
sprintf(temp,"RETURN:%0.1f",h_feed.value);
list_w(temp);

//Third Page

作者: qingkongaaa 时间: 2012-12-10 20:54

icaxhjy88 发表于 2012-12-10 14:58
我来告诉你：
转速是4005。进给是17

我拜你为师好不

作者: 蓝摩羯 时间: 2012-12-28 21:25
楼主威武。。向楼主学习。。

欢迎光临 iCAx开思网 (https://www.icax.org/)