iCAx开思网

标题: 【转帖】UG and PROE [打印本页]

作者: idesign    时间: 2002-6-13 02:48
标题: 【转帖】UG and PROE
FOR RELEASE: Monday, March 18, 2002
EDS and PTC Announce Agreement To Enable Interoperability Between Their Product Development Software Solutions
Agreement Focuses On Driving Down Potentially Billions of Dollars In Interoperability Costs For Global Manufacturers  
PLANO, Texas and NEEDHAM, Mass. -- In an initiative targeting over $1 Billion in annual costs associated with the lack of interperoperability in manufacturing software, EDS (NYSE: EDS) and PTC (Nasdaq: PMTC) today announced the signing of a technology exchange agreement.  
  
Under the terms of the agreement both companies will share toolkit technology and exchange end-user products. Both EDS and PTC will have the ability to provide interoperability between their respective product lifecycle management (PLM) solutions.  
  
The lack of interoperability in the automotive supply chain alone carries an estimated price tag of $1 billion per year, according to the National Institute of Standards & Technology (Interoperability Cost Analysis of the U.S. Automotive Supply Chain, 1999). Interoperability is a major challenge in other manufacturing sectors, as well, including aerospace, high-tech, consumer products and industrial machinery.
  
The agreement between EDS and PTC brings together two market leaders in an initiative aimed at helping manufacturers decrease interoperability costs and associated data integrity problems. In particular, interoperability between EDS and PTC software will significantly improve situations where a mix of their software currently exists, as is often the case between OEMs and supply chain communities.  
  
“We have built our products on a strategy we call 'open by design' for many years,” said Chuck Grindstaff, president of PLM Products, EDS PLM Solutions. "This strategy, combined with the reciprocal licensing arrangement in today's agreement with PTC, will truly benefit our mutual customers by enabling enhanced connectivity. Our goal is to create the highest possible level of product definition exchange and this agreement shows that we continue to give our customers' needs the highest priority."  
  
“With this agreement, PTC and EDS are addressing two related issues,” said Jim Heppelmann, PTC’s executive vice president and chief technology officer. “Manufacturers need ways to exchange product data with their entire supply chain; and as vendors, we need to promote the growth of the PLM industry in order to help them do that. Only a complete product development process and interoperability will allow manufacturers to create the product, collaborate with all participants throughout the value chain, and effectively control the process. With our customers in mind, PTC has been addressing interoperability on various fronts, and this is one more validation of our efforts in this area.”  
  
About PTC
PTC (Nasdaq: PMTC) develops, markets, and supports software solutions that help manufacturers win with superior products. PTC is the world’s largest software company with a total commitment to product development. The company services more than 33,000 customers worldwide. Further information on PTC is available at https://www.ptc.com.  
  
About EDS
EDS, the leading global services company, provides strategy, implementation and hosting for clients managing the business and technology complexities of the digital economy. EDS brings together the world’s best technologies to address critical client business imperatives. It helps clients eliminate boundaries, collaborate in new ways, establish their customers’ trust and continuously seek improvement. EDS, with its management-consulting subsidiary, A.T. Kearney, serves the world’s leading companies and governments in 60 countries. EDS reported revenues of $21.5 billion in 2001. The company’s stock is traded on the New York Stock Exchange (NYSE: EDS) and the London Stock Exchange.
作者: idesign    时间: 2002-6-13 18:50
EDS和PTC宣布在各自的开发软件方案中提供协同工作的能力
  
对全球的制造商来说,这将会降低数以亿计的用来提高软件协同工作能力的费用
  
2002年3月18日来自德克萨斯州PLANO和马萨诸塞州NEEDHAM的报道,为了降低由于每年制造软件缺乏协同能力而耗费的大量资金,EDS和PTC两家公司宣布:共同签署了一项有关技术交流的协议。
  
根据协议的条款,这两家公司将会共享工具包技术,并交流最终用户产品。因此,在其各自的产品生命周期管理方案中,EDS和PTC将会提供相互协同工作的能力。在汽车工业的供应链中,仅仅是因为缺乏相互协同工作的能力,每年要耗费大约10亿美元,这些资料来自国际标准和技术研究所"关于美国汽车工业供应链用于协同的费用的分析"1999年的报告。同样,在其它的制造领域,拥有相互协同工作的能力也是一项挑战,如,航空业、高科技行业、消费品制造和工业设备制造等领域。
  
EDS和PTC之间的协议使这两家业内巨人联合起来,共同致力于帮助制造商降低用于协同工作的费用,并解决相关的数据完整性问题。由于EDS和PTC软件间具有相互协同工作的能力使得使用这两家公司软件的企业将会大幅度地提高其工作效率。而实际上,很多的原始设备制造商和供应链中的企业采用的都是EDS和PTC的产品。
  
"多年以来,我们是以'开放设计'的理念来进行产品设计的,"EDS PLM Solutions产品总裁Chuck Grindstaff说,"这个理念,加上现在同PTC的相互授权的协议,这将增强我们两家产品的相互协同工作的能力,将会使我们两家共同的客户受益。我们的目标是进行最高等级的产品交流,同时这个协议也表明了我们是最优先考虑客户需要的公司。"  
  
"通过签署这个协议,PTC和EDS将一起解决两个相关的问题," PTC执行副总裁兼技术总监Jim Heppelman说,"一个问题是制造商需要一种方式,通过这种方式可以同其供应链上的全部供应商进行产品数据交流;第二个是作为供应商,我们需要通过解决制造商的问题来促进PLM市场的增长。只有通过一个完整的产品开发过程,制造商才可以同其所有的合作伙伴协作,共同开发产品,并对过程进行有效的控制。出于对客户的考虑,在不同的领域,PTC在一直解决产品的协同性问题,这个协议的签署,再一次证明了我们公司在这个方向的努力。"
作者: xiaoli    时间: 2002-7-27 14:56
好消息!!原来还准备学ug的,现在看不用了.已经快三通!!
作者: 工业设计高手    时间: 2002-8-4 16:32
呵呵,好啊,太好了哦!
作者: yifun    时间: 2002-10-6 12:33
那么学好UG也能和PROE交流了,好!
作者: lzp    时间: 2002-10-23 15:44
UGS发布了Solid Edge V9,其相人注目的特点是提供了从二维设计向三维实体模型的转换工具.UGS得到了MCS的AUTOSNAP 3-D软件的授权.解决了2D图形向3D模型的自动转换中2D图纸不够精确的问题.
     Xpand3D是Solid Edge的一个可选模块,用于处理导入的AutoCAD DXF和DWG文件,MicroStation
  DGN文件以及2D IGES文件。
    除了Xpand3d ,Slid Edge V9还提供了超过300个增强功能,覆盖了机械设计、大装配设计、焊接、Web出版以及工程手册等。Solid Edge图纸功能可以提供各种焊接文档、生成焊接设计图纸。Solid Edge中的简化零件需要手工创建,如果方法正确,原零件的更改会直接引起简化零件的更改。




欢迎光临 iCAx开思网 (https://www.icax.org/) Powered by Discuz! X3.3