iCAx开思网

标题: MASTERCAM9.1后处理非模态G指令输出问题请教 [打印本页]

作者: djwxy 时间: 2013-10-22 19:05
标题: MASTERCAM9.1后处理非模态G指令输出问题请教
想要的结果如下：
%
O0000
(PROGRAM NAME - T)
(DATE=DD-MM-YY - 22-10-13 TIME=HH:MM - 18:47)
G21
G0G17G40G49G80G90
( 5. DRILL TOOL - 1 DIA. OFF. - 1 LEN. - 1 DIA. - 5.)
G0G90G54X-39.911Y6.49A0.S1145M3
G43H1Z10.
G65P80000X10.Y20.Z0.R2.Q2.F0.5
G65P80000X14.Z0.R2.Q2.F0.5
G65P80000X65.Y18.Z0.R2.Q2.F0.5
G80G94
M5
G91G28Z0.
G28X0.Y0.A0.
M30
%

我现在用MPFAN.PST改，如下：
......
pmisc1       #Canned Misc #1 Cycle
   pdrlcommonb
   pcan1, pbld, n, *sgdrlref, *sgdrill, pxout, pyout, pfzout, pcout,
      prdrlout, shftdrl, dwell, *feed, strcantext, e
   pcom_movea

pmisc2       #Canned Misc #2 Cycle (User Option)
   pdrlcommonb
   pcan1, pbld, n,"G65","P80000", pxout, pyout, pfzout, pcout,
      prdrlout, shftdrl, dwell,*peck1, *feed, strcantext, e
   pcom_movea
......

后处理结果：
%
O0000
(PROGRAM NAME - T)
(DATE=DD-MM-YY - 22-10-13 TIME=HH:MM - 18:47)
G21
G0G17G40G49G80G90
( 5. DRILL TOOL - 1 DIA. OFF. - 1 LEN. - 1 DIA. - 5.)
G0G90G54X-39.911Y6.49A0.S1145M3
G43H1Z10.
G65P80000X10.Y20.Z0.R2.Q2.F0.5
X14.
X65.Y18.
G80G94
M5
G91G28Z0.
G28X0.Y0.A0.
M30
%

问题：
怎样在每一行输出G65P80000...R2.Q2.F0.5 ?

请各位大侠赐教，不胜感激！

作者: djwxy 时间: 2013-10-22 19:29
。。。。。。。。自己占位置

作者: djwxy 时间: 2013-10-22 22:27
。。。。。。。。。。。。。。。今晚看来无人可解了。。。。。明天继续等。。。。。。。。。

欢迎光临 iCAx开思网 (https://www.icax.org/)