怎样设置才能使从CATIA中导出的*.CMD文件导入ADAMS2003中

怎样设置才能从CATIA中导出的*.CMD文件导入ADAMS2003中？
我导入时ADAMS2003报错，如下：
ERROR:   Could not successfully open the dataset file.
ERROR:   ---------------------------------------------------------------------
ERROR:   Error detected on line number 19, character 60 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR:   No Marker named 'model1' was found.
ERROR:   The command was not executed.
ERROR:   &>    marker_name = .model1.Shaft.marker_39_12_Shaft_SHELL1   &
ERROR:   ---------------------------------------------------------------------
ERROR:   ---------------------------------------------------------------------
ERROR:   Error detected on line number 24, character 60 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR:   No Marker named 'model1' was found.
ERROR:   The command was not executed.
ERROR:   &>    marker_name = .model1.Shaft.marker_39_12_Shaft_SHELL1   &
ERROR:   ---------------------------------------------------------------------
ERROR:   ---------------------------------------------------------------------
ERROR:   Error detected on line number 28, character 39 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR:   No Shell named 'model1' was found.
ERROR:   The command was not executed.
ERROR:   &> shell_name = .model1.Shaft.SHELL39    &
ERROR:   ---------------------------------------------------------------------
ERROR:   ---------------------------------------------------------------------
ERROR:   Error detected on line number 40, character 43 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR:   No Geometry named 'model1' was found.
ERROR:   The command was not executed.
ERROR:   &>    geometry_name = .model1.Shaft.SHELL39  &
ERROR:   ---------------------------------------------------------------------
ERROR:   ---------------------------------------------------------------------
ERROR:   Error detected on line number 45, character 60 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR:   No Marker named 'model1' was found.
ERROR:   The command was not executed.
ERROR:   &>    marker_name = .model1.Shaft.marker_40_12_Shaft_SHELL1   &
ERROR:   ---------------------------------------------------------------------
ERROR:   ---------------------------------------------------------------------
ERROR:   Error detected on line number 50, character 60 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR:   No Marker named 'model1' was found.
ERROR:   The command was not executed.
ERROR:   &>    marker_name = .model1.Shaft.marker_40_12_Shaft_SHELL1   &
ERROR:   ---------------------------------------------------------------------
ERROR:   ---------------------------------------------------------------------
ERROR:   Error detected on line number 54, character 39 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR:   No Shell named 'model1' was found.
ERROR:   The command was not executed.
ERROR:   &> shell_name = .model1.Shaft.SHELL40    &
ERROR:   ---------------------------------------------------------------------
ERROR:   ---------------------------------------------------------------------
ERROR:   Error detected on line number 60, character 43 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR:   No Geometry named 'model1' was found.
ERROR:   The command was not executed.
ERROR:   &>    geometry_name = .model1.Shaft.SHELL40  &
ERROR:   ---------------------------------------------------------------------
ERROR:   ---------------------------------------------------------------------
ERROR:   Error detected on line number 65, character 60 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR:   No Marker named 'model1' was found.
ERROR:   The command was not executed.
ERROR:   &>    marker_name = .model1.Shaft.marker_41_12_Shaft_SHELL1   &
ERROR:   ---------------------------------------------------------------------
ERROR:   ---------------------------------------------------------------------
ERROR:   Error detected on line number 70, character 60 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR:   No Marker named 'model1' was found.
ERROR:   The command was not executed.
ERROR:   &>    marker_name = .model1.Shaft.marker_41_12_Shaft_SHELL1   &
ERROR:   ---------------------------------------------------------------------
ERROR:   ---------------------------------------------------------------------
ERROR:   Error detected on line number 74, character 39 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR:   No Shell named 'model1' was found.
ERROR:   The command was not executed.
ERROR:   &> shell_name = .model1.Shaft.SHELL41    &
ERROR:   ---------------------------------------------------------------------
ERROR:   ---------------------------------------------------------------------
ERROR:   Error detected on line number 80, character 43 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR:   No Geometry named 'model1' was found.
ERROR:   The command was not executed.
ERROR:   &>    geometry_name = .model1.Shaft.SHELL41  &
ERROR:   ---------------------------------------------------------------------
ERROR:   ---------------------------------------------------------------------
ERROR:   Error detected on line number 85, character 56 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR:   No Marker named 'model1' was found.
ERROR:   The command was not executed.
ERROR:   &>    marker_name = .model1.Arm.marker_42_12_Arm_SHELL1   &
ERROR:   ---------------------------------------------------------------------
ERROR:   ---------------------------------------------------------------------
ERROR:   Error detected on line number 90, character 56 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR:   No Marker named 'model1' was found.
ERROR:   The command was not executed.
ERROR:   &>    marker_name = .model1.Arm.marker_42_12_Arm_SHELL1   &
ERROR:   ---------------------------------------------------------------------
ERROR:   ---------------------------------------------------------------------
ERROR:   Error detected on line number 94, character 37 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR:   No Shell named 'model1' was found.
ERROR:   The command was not executed.
ERROR:   &> shell_name = .model1.Arm.SHELL42    &
ERROR:   ---------------------------------------------------------------------
ERROR:   ---------------------------------------------------------------------
ERROR:   Error detected on line number 106, character 41 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR:   No Geometry named 'model1' was found.
ERROR:   The command was not executed.
ERROR:   &>    geometry_name = .model1.Arm.SHELL42  &
ERROR:   ---------------------------------------------------------------------
ERROR:   ---------------------------------------------------------------------
ERROR:   Error detected on line number 111, character 60 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR:   No Marker named 'model1' was found.
ERROR:   The command was not executed.
ERROR:   &>    marker_name = .model1.Crank.marker_43_12_Crank_SHELL1   &
ERROR:   ---------------------------------------------------------------------
ERROR:   ---------------------------------------------------------------------
ERROR:   Error detected on line number 116, character 60 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR:   No Marker named 'model1' was found.
ERROR:   The command was not executed.
ERROR:   &>    marker_name = .model1.Crank.marker_43_12_Crank_SHELL1   &
ERROR:   ---------------------------------------------------------------------
ERROR:   ---------------------------------------------------------------------
ERROR:   Error detected on line number 120, character 39 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR:   No Shell named 'model1' was found.
ERROR:   The command was not executed.
ERROR:   &> shell_name = .model1.Crank.SHELL43    &
ERROR:   ---------------------------------------------------------------------
ERROR:   ---------------------------------------------------------------------
ERROR:   Error detected on line number 132, character 43 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR:   No Geometry named 'model1' was found.
ERROR:   The command was not executed.
ERROR:   &>    geometry_name = .model1.Crank.SHELL43  &
ERROR:   ---------------------------------------------------------------------
ERROR:   ---------------------------------------------------------------------
ERROR:   Error detected on line number 137, character 60 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR:   No Marker named 'model1' was found.
ERROR:   The command was not executed.
ERROR:   &>    marker_name = .model1.Link1.marker_44_12_Link1_SHELL1   &
ERROR:   ---------------------------------------------------------------------
ERROR:   ---------------------------------------------------------------------
ERROR:   Error detected on line number 142, character 60 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR:   No Marker named 'model1' was found.
ERROR:   The command was not executed.
ERROR:   &>    marker_name = .model1.Link1.marker_44_12_Link1_SHELL1   &
ERROR:   ---------------------------------------------------------------------
ERROR:   ---------------------------------------------------------------------
ERROR:   Error detected on line number 146, character 39 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR:   No Shell named 'model1' was found.
ERROR:   The command was not executed.
ERROR:   &> shell_name = .model1.Link1.SHELL44    &
ERROR:   ---------------------------------------------------------------------
ERROR:   ---------------------------------------------------------------------
ERROR:   Error detected on line number 158, character 43 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR:   No Geometry named 'model1' was found.
ERROR:   The command was not executed.
ERROR:   &>    geometry_name = .model1.Link1.SHELL44  &
ERROR:   ---------------------------------------------------------------------
ERROR:   ---------------------------------------------------------------------
ERROR:   Error detected on line number 163, character 60 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR:   No Marker named 'model1' was found.
ERROR:   The command was not executed.
ERROR:   &>    marker_name = .model1.Link2.marker_45_12_Link2_SHELL1   &
ERROR:   ---------------------------------------------------------------------
ERROR:   ---------------------------------------------------------------------
ERROR:   Error detected on line number 168, character 60 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR:   No Marker named 'model1' was found.
ERROR:   The command was not executed.
ERROR:   &>    marker_name = .model1.Link2.marker_45_12_Link2_SHELL1   &
ERROR:   ---------------------------------------------------------------------
ERROR:   ---------------------------------------------------------------------
ERROR:   Error detected on line number 172, character 39 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR:   No Shell named 'model1' was found.
ERROR:   The command was not executed.
ERROR:   &> shell_name = .model1.Link2.SHELL45    &
ERROR:   ---------------------------------------------------------------------
ERROR:   ---------------------------------------------------------------------
ERROR:   Error detected on line number 184, character 43 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR:   No Geometry named 'model1' was found.
ERROR:   The command was not executed.
ERROR:   &>    geometry_name = .model1.Link2.SHELL45  &
ERROR:   ---------------------------------------------------------------------
ERROR:   ---------------------------------------------------------------------
ERROR:   Error detected on line number 189, character 62 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR:   No Marker named 'model1' was found.
ERROR:   The command was not executed.
ERROR:   &>    marker_name = .model1.Collar.marker_46_12_Collar_SHELL1   &
ERROR:   ---------------------------------------------------------------------
ERROR:   ---------------------------------------------------------------------
ERROR:   Error detected on line number 194, character 62 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR:   No Marker named 'model1' was found.
ERROR:   The command was not executed.
ERROR:   &>    marker_name = .model1.Collar.marker_46_12_Collar_SHELL1   &
ERROR:   ---------------------------------------------------------------------
ERROR:   ---------------------------------------------------------------------
ERROR:   Error detected on line number 198, character 40 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR:   No Shell named 'model1' was found.
ERROR:   The command was not executed.
ERROR:   &> shell_name = .model1.Collar.SHELL46    &
ERROR:   ---------------------------------------------------------------------
ERROR:   ---------------------------------------------------------------------
ERROR:   Error detected on line number 210, character 44 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR:   No Geometry named 'model1' was found.
ERROR:   The command was not executed.
ERROR:   &>    geometry_name = .model1.Collar.SHELL46  &
ERROR:   ---------------------------------------------------------------------
ERROR:   ---------------------------------------------------------------------
ERROR:   Error detected on line number 215, character 64 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR:   No Marker named 'model1' was found.
ERROR:   The command was not executed.
ERROR:   &>    marker_name = .model1.Cardian.marker_47_12_Cardian_SHELL1   &
ERROR:   ---------------------------------------------------------------------
ERROR:   ---------------------------------------------------------------------
ERROR:   Error detected on line number 220, character 64 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR:   No Marker named 'model1' was found.
ERROR:   The command was not executed.
ERROR:   &>    marker_name = .model1.Cardian.marker_47_12_Cardian_SHELL1   &
ERROR:   ---------------------------------------------------------------------
ERROR:   ---------------------------------------------------------------------
ERROR:   Error detected on line number 224, character 41 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR:   No Shell named 'model1' was found.
ERROR:   The command was not executed.
ERROR:   &> shell_name = .model1.Cardian.SHELL47    &
ERROR:   ---------------------------------------------------------------------
ERROR:   ---------------------------------------------------------------------
ERROR:   Error detected on line number 236, character 45 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR:   No Geometry named 'model1' was found.
ERROR:   The command was not executed.
ERROR:   &>    geometry_name = .model1.Cardian.SHELL47  &
ERROR:   ---------------------------------------------------------------------
ERROR:   ---------------------------------------------------------------------
ERROR:   Error detected on line number 241, character 35 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR:   No Model named 'model1' was found.
ERROR:   The command was not executed.
ERROR:   &>    model_name          = .model1  &
ERROR:   ---------------------------------------------------------------------
ERROR:   ---------------------------------------------------------------------
ERROR:   Error detected on line number 246, character 26 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR:   No Model named 'model1' was found.
ERROR:   The command was not executed.
ERROR:   &>    model_name = .model1  &
ERROR:   ---------------------------------------------------------------------
ERROR:   ---------------------------------------------------------------------
ERROR:   Error detected on line number 264, character 17 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR:   No Model named 'model1' was found.
ERROR:   The command was not executed.
ERROR:   &>    model = model1
ERROR:   ---------------------------------------------------------------------
  请各位帮忙解决，谢谢

你的出错文件贴的太长了！你把ADAMS的工作目录设置到你存放*.CMD文件的目录，就可以了。因为ADAMS调入CMD文件时，还要读入其他相关文件。

我已经解决掉了
不过还是要谢谢你的回复
谢谢
^_^

catia能够直接导出cmd文件么？还是用了什么接口软件啊？sadsad ，指点一下吧。

对阿。什么接口啊？

就是这个接口
  
MSC SIMDESIGNER V2004 R2 FOR CATIA V5R12
  
https://www.mscsoftware.com/products...ail.cfm?PI=495#
  
   
  
MSC.Software Corp. , 全球仿真软件、服务器、系统集成供应商和先驱者，发布的一款新产品，SIMDESIGNER.V2004。它是MSC.visualNastran V5i的后续升级版本。主要特性包含在软件包中，这里介绍一下MSC.visualNastran V5i。
  
from mscsoftware taiwan
  
通過使用集成於CATIA V5 的MSC.visualNastran 解決方案，用戶可以在使用自己喜歡的PLM系統的同時，從世界領先的模擬技術中獲益。
  
MSC.visualNastran V5i 產品系列無縫集成於CATIA V5 環境，為您和您的設計團隊在產品設計流程中，提供著眼於提高產品可靠性與可操作性的一整套可擴展的工具。
  
創成式產品將MSC 的模擬技術與CATIA V5環境無縫的集成在一起。目前可提供的創成式產品包括：MSC.Nastran創成式線性分析 MSC.Nastran Generative (GPN), MSC創成式非線性分析 MSC.Generative Nonlinear (GNL), MSC創成式熱分析 MSC.Generative Thermal (GTH), 和 MSC.Dynamic Designer (DDM).
  
Gateway產品可以使CATIA V5 的用戶可以直接訪問共同的模擬資源。緊密地支持CATIA V5產品策略，目前的Gateway產品可以使用戶直接進入MSC.Nastran, MSC.Marc, ANSYS, and ABAQUS，也可以使用類似AP209之類專用標準。
  
獲益：
-在您所喜歡的PLM系統中，提升了您的資金投入。
-在整個設計周期中，將分析工作提前。
-在設計人員與分析人員之間實現協同工作
-縮短產品的設計周期，降低成本，提高?#124;量
  
應用：
-線性靜力分析，模態分析，屈曲分析
-熱分析
-非線性分析
-多體動力學模擬
-對於MSC.Nastran, MSC.Marc, ABAQUS, ， ANSYS 和STEP AP209實現雙向互操作

这模块怎么使用!在那下!楼上的能否说详细点!他们怎么连接?谢谢QQ:94183358

---------------------------------------------------------------------
ERROR:   Error detected on line number 17, character 18 of E:/adams exsicise/view/body.cmd.
ERROR:   The Model 'model1' already exists.
ERROR:   The command was not executed.
ERROR:   &>    model = model1  &
ERROR:   ---------------------------------------------------------------------
ERROR:   ---------------------------------------------------------------------
ERROR:   Error detected on line number 21, character 66 of E:/adams exsicise/view/body.cmd.
ERROR:   No Marker was found because 'cheboy_1' does not exist beneath '.model1'.
ERROR:   The command was not executed.
ERROR:   &>    marker_name = .model1.cheboy_1.marker_1_body_cheboy_1_SHELL   &
ERROR:   ---------------------------------------------------------------------
ERROR:   ---------------------------------------------------------------------
ERROR:   Error detected on line number 26, character 66 of E:/adams exsicise/view/body.cmd.
ERROR:   No Marker was found because 'cheboy_1' does not exist beneath '.model1'.
ERROR:   The command was not executed.
ERROR:   &>    marker_name = .model1.cheboy_1.marker_1_body_cheboy_1_SHELL   &
ERROR:   ---------------------------------------------------------------------
ERROR:   ---------------------------------------------------------------------
ERROR:   Error detected on line number 30, character 41 of E:/adams exsicise/view/body.cmd.
ERROR:   No Shell was found because 'cheboy_1' does not exist beneath '.model1'.
ERROR:   The command was not executed.
ERROR:   &> shell_name = .model1.cheboy_1.SHELL1    &
ERROR:   ---------------------------------------------------------------------
ERROR:   ---------------------------------------------------------------------
ERROR:   Error detected on line number 36, character 36 of E:/adams exsicise/view/body.cmd.
ERROR:   The Color 'DDM_1' already exists.
ERROR:   The command was not executed.
ERROR:   &>    color_name      = .colors.DDM_1 &
ERROR:   ---------------------------------------------------------------------
ERROR:   ---------------------------------------------------------------------
ERROR:   Error detected on line number 42, character 45 of E:/adams exsicise/view/body.cmd.
ERROR:   No Geometry was found because 'cheboy_1' does not exist beneath '.model1'.
ERROR:   The command was not executed.
ERROR:   &>    geometry_name = .model1.cheboy_1.SHELL1  &
ERROR:   ---------------------------------------------------------------------