请机械专业英语达人帮翻译下一鬼佬的技术要求

titany

NOTES:

1. THE PROE PART FILE SHALL CONTROL ALL FEATURES OF THIS PART.
2. FLATNESS TO BE WITHIN 2% OF OVERALL LENGTH.
3. PART SHALL BE FREE OF OIL, GREASE AND/OR DIRT PARTICLES.
4. MIN. INSIDE BEND RADII 0.20, UNLESS OTHERWISE SPECIFIED.
5. BURRS NOT TO EXCEED 5% OF THE MATERIAL THICKNESS.
6. CORNERS SHOWN SHARP R0.25 MAX.
7. ALL DIMENSIONS INTERPRETED USING ANSI Y14.5M.
8. HEMMED FLANGES MUST HAVE GAP OF 0.1MM OR LESS AT OPEN EDGES.
9. ALL EDGES TO PASS UL 1439 TESTING.
10. ALL BENDS 90 DEGRESS +-.25 DEGREES, UNLESS OTHERWISE STATED.

martec

zgfa

gonelife

zgfa

ychua2008

jxcctv