好奇怪的问题，高手们请指点迷津

在用proe打印的时候，笔宽的设置一直没有弄好
问题出在钣金件老是当细实线打了，我的table.pnt文件如下：
pen 1 color 0.0 0.0 0.0; thickness 0.4 mm;   
pen 2 color 0.0 0.0 0.0; thickness 0.19 mm;   
pen 3 color 0.0 0.0 0.0; thickness 0.19 mm;  
pen 4 color 0.0 0.0 0.0; thickness 0.08 mm;   
pen 5 color 0.0 0.0 0.0; thickness 0.4 mm;
pen 6 color 0.0 0.0 0.0; thickness 0.08 mm;  
pen 7 color 0.0 0.0 0.0; thickness 0.08 mm;  
pen 8 color 0.0 0.0 0.0; thickness 0.08 mm;  
  
请高手们指点pen3,pen4,pen6,pen7,pen8中到底哪个是钣金绿线的宽度阿！

而且观看了一些高手的帖子，虽然各有出入，但是都说pen5是设置钣金绿线的，可是我设置了，却还是细实线，有没有相同疑问的朋友啊？

这个是我用的！
! This is a pen table file.  See Interface Guide under "pen mapping".
  
! Pen 1 = white entities (object lines)
! Pen 2 = yellow entities (text, dimensions, cross hatching)
! Pen 3 = gray entities (hidden lines)
! Pen 4 = red entities (can use for drawing border if you change the  
! entity color to red in the format file)
! Pen 5 = green entities (sheetmetal)
! Pen 6 = cyan entities (section)
! Pen 7 = dark gray entities (dimmed)
! Pen 8 = blue entities (spline surface grid)
  
pen 1 thickness .025 cm; color 0 0 0
pen 2 thickness .015 cm; color 0 0 0
pen 3 thickness .015 cm; color 0 0 0
pen 4 thickness .020 cm; color 0 0 0
pen 5 thickness .025 cm; color 0 0 0
pen 6 thickness .025 cm; color 0 0 0
pen 7 thickness .015 cm; color 0 0 0
pen 8 thickness .025 cm; color 0 0 0

Blue_star wrote:
这个是我用的！  
  ! This is a pen table file.  See Interface Guide under "pen mapping".  
  
  ! Pen 1 = white entities (object lines)  
  ! Pen 2 = yellow entities (text, dimensions, cross hatching)  
  ! Pen 3 = gray entities (hidden lines)  
  ! Pen 4 = red entities (can use for drawing border if you change the   
  ! entity color to red in the format file)  
  ! Pen 5 = green entities (sheetmetal)  
  ! Pen 6 = cyan entities (section)  
  ! Pen 7 = dark gray entities (dimmed)  
  ! Pen 8 = blue entities (spline surface grid)  
  
  pen 1 thickness .025 cm; color 0 0 0  
  pen 2 thickness .015 cm; color 0 0 0  
  pen 3 thickness .015 cm; color 0 0 0  
  pen 4 thickness .020 cm; color 0 0 0  
  pen 5 thickness .025 cm; color 0 0 0  
  pen 6 thickness .025 cm; color 0 0 0  
  pen 7 thickness .015 cm; color 0 0 0  
  pen 8 thickness .025 cm; color 0 0 0

  
谢谢
老兄，pen 5的笔宽我也改了呀，怎么还是不行呢