系统设置

请问各位大侠：configure  中的 allocations,tolerances中的参数设置应为多少   
                     才好！！！！！

我也是一个初学者，有谁能教我一下，我自已想买CNC加工东东，也想找一个帮手，有没有愿意的？

你买CNC加工什么东东,如果是做橡胶模,就可以找我聊聊

对了，你人再那，我在苏州

请联系我。QQ419199750    caolang2005@tom.com

allocations:
              Maximum number of points per spline = 32767
              Maximum number of patches per sufrace = 50000
              Maximum number of entities for undelete = 500
              Database allocation in KBytes = 92160 ( 90 MB x 1024 KB)
              Toolpath allocation in KBytes = 30720 ( 30 MB x 1024 KBytes)
  
tolerances:
             System Tolerance = 0.00005
             Chaining Tolerance = 0.002
             Minimum arc length = 0.02
             Curve minimum step size = 0.02
             Curve maximum step size = 100.0
             Curve chrdal deviation = 0.02
             Maximum sufrace deviation = 0.02

多谢大侠！！！

allocations:  
              Maximum number of points per spline = 10240
              Maximum number of patches per sufrace = 10240               
              Maximum number of entities for undelete = 500  
              Database allocation in KBytes =25600
             Toolpath allocation in KBytes = 35840  
tolerances:  
             System Tolerance = 0.002
             Chaining Tolerance = 0.005  
             Minimum arc length = 0.005
             Curve minimum step size = 0.005
             Curve maximum step size = 100.0  
             Curve chrdal deviation = 0.005
             Maximum sufrace deviation = 0.005
已上的参数是别的朋友告诉我的，但我不明白原因！！
楼上的朋友的参数又是怎样给出的，谁知道，请告之！！

有些参数要看你的电脑去到什么级数而设定的.
  
例. Database allocation in KBytes = 25600  ( 用多少记忆体来执行绘图工作)  
     Toolpath allocation in KBytes = 35840  (用多少记忆体来执行刀路的运算)

谢谢大哥,热新帮忙!!!!