iCAx开思网
标题:
Master cam 万能后处理修改方法
[打印本页]
作者:
zhangxiaojian
时间:
2006-2-6 17:27
标题:
Master cam 万能后处理修改方法
总序:( incremental 增量G91)
1. 加任意G代码方法:
Pbld,空格n,空格“G49”空格e
2. 当需而把T1 M6;改成
T1;
M6;
时只需把if stage tool>zefo,pbld,n,*t, pbld,n,,”M6”,e
改成:
if stage tool>zefo,pbld,n,*t, e
pbld, n, "M6", e
3. pwcs 机床定位快进至某位置
Pf xout 定位X轴
Pf yout 定位Y轴
Pf zout 定位Z轴
Sg absinc 绝对坐标(G90)
如:
G00 G54 X210 Y210 S3000 M3; G00 G90 G54 X210 Y210
G43 H1 Z100 M08→ 变成 G43 H1 Z100 M08
S3000 M3 S3000 M3
原:
pcan1, pbld, n, *sgcode, *sgabsinc, pwcs, pfxout, pfyout,
pfcout, *speed, *spindle, pgear, strcantext, e
改后:
pcan1, pbld, n, *sgcode,“G54, *sgabsinc, pwcs, pfxout, pfyout,
pfcout, e
Pbld, n, *speed, *spindle, pgear, strcantext, e
欢迎各位试用此后处理程序,适合(FANUC .三菱等)ISO数控机床系统。
地址:广东省 东莞市 东城区东宝路 金田楼五单元
手机:13775254142(19:00-23:00)
E-MAIL:zhang11
iao@126.com
iao@163.com
QQ:289287580
如需全文请联系我
https://zhang314.icpcn.com
作者:
zhanghaij
时间:
2006-2-7 14:45
嗯~有意思
顶
作者:
zhanghaij
时间:
2006-2-7 14:46
有什么不明白,请联系我!
04x04x
作者:
zhanghaij
时间:
2006-2-7 14:48
作者:
taofei
时间:
2006-3-24 11:47
欢迎光临 iCAx开思网 (https://www.icax.org/)
Powered by Discuz! X3.3