|
马上注册,结交更多同行朋友,交流,分享,学习。
您需要 登录 才可以下载或查看,没有帐号?注册
x
怎样设置才能从CATIA中导出的*.CMD文件导入ADAMS2003中?
我导入时ADAMS2003报错,如下:
ERROR: Could not successfully open the dataset file.
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 19, character 60 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR: No Marker named 'model1' was found.
ERROR: The command was not executed.
ERROR: &> marker_name = .model1.Shaft.marker_39_12_Shaft_SHELL1 &
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 24, character 60 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR: No Marker named 'model1' was found.
ERROR: The command was not executed.
ERROR: &> marker_name = .model1.Shaft.marker_39_12_Shaft_SHELL1 &
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 28, character 39 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR: No Shell named 'model1' was found.
ERROR: The command was not executed.
ERROR: &> shell_name = .model1.Shaft.SHELL39 &
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 40, character 43 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR: No Geometry named 'model1' was found.
ERROR: The command was not executed.
ERROR: &> geometry_name = .model1.Shaft.SHELL39 &
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 45, character 60 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR: No Marker named 'model1' was found.
ERROR: The command was not executed.
ERROR: &> marker_name = .model1.Shaft.marker_40_12_Shaft_SHELL1 &
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 50, character 60 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR: No Marker named 'model1' was found.
ERROR: The command was not executed.
ERROR: &> marker_name = .model1.Shaft.marker_40_12_Shaft_SHELL1 &
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 54, character 39 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR: No Shell named 'model1' was found.
ERROR: The command was not executed.
ERROR: &> shell_name = .model1.Shaft.SHELL40 &
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 60, character 43 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR: No Geometry named 'model1' was found.
ERROR: The command was not executed.
ERROR: &> geometry_name = .model1.Shaft.SHELL40 &
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 65, character 60 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR: No Marker named 'model1' was found.
ERROR: The command was not executed.
ERROR: &> marker_name = .model1.Shaft.marker_41_12_Shaft_SHELL1 &
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 70, character 60 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR: No Marker named 'model1' was found.
ERROR: The command was not executed.
ERROR: &> marker_name = .model1.Shaft.marker_41_12_Shaft_SHELL1 &
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 74, character 39 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR: No Shell named 'model1' was found.
ERROR: The command was not executed.
ERROR: &> shell_name = .model1.Shaft.SHELL41 &
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 80, character 43 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR: No Geometry named 'model1' was found.
ERROR: The command was not executed.
ERROR: &> geometry_name = .model1.Shaft.SHELL41 &
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 85, character 56 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR: No Marker named 'model1' was found.
ERROR: The command was not executed.
ERROR: &> marker_name = .model1.Arm.marker_42_12_Arm_SHELL1 &
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 90, character 56 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR: No Marker named 'model1' was found.
ERROR: The command was not executed.
ERROR: &> marker_name = .model1.Arm.marker_42_12_Arm_SHELL1 &
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 94, character 37 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR: No Shell named 'model1' was found.
ERROR: The command was not executed.
ERROR: &> shell_name = .model1.Arm.SHELL42 &
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 106, character 41 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR: No Geometry named 'model1' was found.
ERROR: The command was not executed.
ERROR: &> geometry_name = .model1.Arm.SHELL42 &
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 111, character 60 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR: No Marker named 'model1' was found.
ERROR: The command was not executed.
ERROR: &> marker_name = .model1.Crank.marker_43_12_Crank_SHELL1 &
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 116, character 60 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR: No Marker named 'model1' was found.
ERROR: The command was not executed.
ERROR: &> marker_name = .model1.Crank.marker_43_12_Crank_SHELL1 &
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 120, character 39 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR: No Shell named 'model1' was found.
ERROR: The command was not executed.
ERROR: &> shell_name = .model1.Crank.SHELL43 &
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 132, character 43 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR: No Geometry named 'model1' was found.
ERROR: The command was not executed.
ERROR: &> geometry_name = .model1.Crank.SHELL43 &
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 137, character 60 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR: No Marker named 'model1' was found.
ERROR: The command was not executed.
ERROR: &> marker_name = .model1.Link1.marker_44_12_Link1_SHELL1 &
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 142, character 60 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR: No Marker named 'model1' was found.
ERROR: The command was not executed.
ERROR: &> marker_name = .model1.Link1.marker_44_12_Link1_SHELL1 &
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 146, character 39 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR: No Shell named 'model1' was found.
ERROR: The command was not executed.
ERROR: &> shell_name = .model1.Link1.SHELL44 &
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 158, character 43 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR: No Geometry named 'model1' was found.
ERROR: The command was not executed.
ERROR: &> geometry_name = .model1.Link1.SHELL44 &
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 163, character 60 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR: No Marker named 'model1' was found.
ERROR: The command was not executed.
ERROR: &> marker_name = .model1.Link2.marker_45_12_Link2_SHELL1 &
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 168, character 60 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR: No Marker named 'model1' was found.
ERROR: The command was not executed.
ERROR: &> marker_name = .model1.Link2.marker_45_12_Link2_SHELL1 &
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 172, character 39 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR: No Shell named 'model1' was found.
ERROR: The command was not executed.
ERROR: &> shell_name = .model1.Link2.SHELL45 &
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 184, character 43 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR: No Geometry named 'model1' was found.
ERROR: The command was not executed.
ERROR: &> geometry_name = .model1.Link2.SHELL45 &
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 189, character 62 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR: No Marker named 'model1' was found.
ERROR: The command was not executed.
ERROR: &> marker_name = .model1.Collar.marker_46_12_Collar_SHELL1 &
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 194, character 62 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR: No Marker named 'model1' was found.
ERROR: The command was not executed.
ERROR: &> marker_name = .model1.Collar.marker_46_12_Collar_SHELL1 &
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 198, character 40 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR: No Shell named 'model1' was found.
ERROR: The command was not executed.
ERROR: &> shell_name = .model1.Collar.SHELL46 &
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 210, character 44 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR: No Geometry named 'model1' was found.
ERROR: The command was not executed.
ERROR: &> geometry_name = .model1.Collar.SHELL46 &
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 215, character 64 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR: No Marker named 'model1' was found.
ERROR: The command was not executed.
ERROR: &> marker_name = .model1.Cardian.marker_47_12_Cardian_SHELL1 &
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 220, character 64 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR: No Marker named 'model1' was found.
ERROR: The command was not executed.
ERROR: &> marker_name = .model1.Cardian.marker_47_12_Cardian_SHELL1 &
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 224, character 41 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR: No Shell named 'model1' was found.
ERROR: The command was not executed.
ERROR: &> shell_name = .model1.Cardian.SHELL47 &
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 236, character 45 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR: No Geometry named 'model1' was found.
ERROR: The command was not executed.
ERROR: &> geometry_name = .model1.Cardian.SHELL47 &
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 241, character 35 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR: No Model named 'model1' was found.
ERROR: The command was not executed.
ERROR: &> model_name = .model1 &
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 246, character 26 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR: No Model named 'model1' was found.
ERROR: The command was not executed.
ERROR: &> model_name = .model1 &
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 264, character 17 of E:/DassaultSystemes/CATEnv/crank_slider/12.cmd.
ERROR: No Model named 'model1' was found.
ERROR: The command was not executed.
ERROR: &> model = model1
ERROR: ---------------------------------------------------------------------
请各位帮忙解决,谢谢 |
|