后处理问题

jayjolin

N0010 G40 G17 G90 G21
N0020 T01 M06
N0030 G00 X78.123 Y57.251 S1800 M03
N0040 G43 Z10. H00
N0050 Z3.
N0060 G01 X79.515 Y55.675 Z2.433 F1200. M08
N0070 X81.487 Y54.926 Z1.867
N0080 X83.585 Y55.15 Z1.3
N0090 X85.354 Y56.301 Z.733
N0100 X86.409 Y58.127 Z.167
N0110 X86.524 Y60.234 Z-.4
这是我后处理出的程序，怎么设置能把红色代码后面的小数点去点，蓝色前面的小数点怎么回事，前面是不是有个0没有输出，怎么设置，本人菜鸟刚接触UGCAM,望各位大虾帮助小弟不胜感激

phyhawk