iCAx开思网

标题: 关于PROE中的打印 [打印本页]

作者: belindayy 时间: 2003-7-1 13:10
标题: 关于PROE中的打印
在PROE中打印时,怎么设置线条,为什么把线条设细了,打出来的线又淡又虚,有点象小型喷墨打印的样子,我用的是激光打印,就是不知道怎么设置,请哪位指点一下吧,小妹在此谢过了!!::?::?:I

作者: snowind 时间: 2003-7-1 22:34
转贴：
This is a pen table file.  See Interface Guide under "pen mapping".

! Pen 1 = white entities (object lines)
! Pen 2 = yellow entities (text, dimensions, cross hatching)
! Pen 3 = gray entities (hidden lines)
! Pen 4 = red entities (can use for drawing border if you change the
! entity color to red in the format file)
! Pen 5 = green entities (sheetmetal)
! Pen 6 = cyan entities (section)
! Pen 7 = dark gray entities (dimmed)
! Pen 8 = blue entities (spline surface grid)

pen 1 thickness .010 in; drawing_color
pen 2 thickness .005 in; letter_color
pen 3 thickness .005 in; half_tone_color
pen 4 thickness .005 in; highlite_color
pen 5 thickness .010 in; color 0 0 0
pen 6 thickness .010 in; color 0 0 0
pen 7 thickness .005 in; color 0 0 0
pen 8 thickness .005 in; color 0 0 0

欢迎光临 iCAx开思网 (https://www.icax.org/)