xxxwww wrote:
铣床直接可以铣出来
frank_hn wrote:
粉末冶金的不能铣::y
asu wrote:
銑是能銑得了,不過要用硬質合金或是鎢鋼銑刀,好象成本上不劃算
frank_hn wrote:
除了金刚刀,其他刀是不能加工的
可以磨或电火花加工....8D
frank_hn wrote:
粉末冶金的不能铣::y
asu wrote:
孔線割,槽放電可以嗎?
hardafay wrote:
谢谢大家,我们先考虑了用加工中心,当然那成本太高了
后来试了用普通铣床,但精度太低
现在用数控铣床,仿形铣,但成本还是不低
hardafay wrote:
那我想会很贵阿
欢迎光临 iCAx开思网 (https://www.icax.org/) | Powered by Discuz! X3.3 |