|
|
马上注册，结交更多同行朋友，交流，分享，学习。
您需要 登录 才可以下载或查看，没有帐号？注册
x
我们打开配置选项就可以看到下表
! Konfiguration of partnames and layernames
!
! Dont modify the first five columns (SYSTEMNAME INDEX1-3, SIDE)
!
! Add the new partname in the column NAME. Add a "#" at the position, you want the project-prefix to
! be inserted. (Take care for the name is a valid ProENGINEER-name with less than 32 characters, even
! if the internal number and side-marker are added, so use maximum 26 characters-prefix length)
!
! With the PART_NO you define the position of the part in the bom. Insert a fix value or a "*" for let
! the system add a running number (format as a 3char-string) to the ID!
!
! If you have set the CREATE_LAYER or CREATE_GROUP_LAYER option in buw_mold.cfg, you can
! define the names of these layers in the last two columns.
!
! With the BOM_NAME you can define the bom-entry for this part, if you dont want to see the partname
! here, e.g. you dont need the project_prefix, etc. In addition to the conversions made for the
! NAME, you can define blanks in this name, substituted by a *. See example Clamping plate!
!
! IMPORTANT: Dont delete any entry. If you want a part not to have any layers, add "-" instead of the name.
!
! SYSTEMNAME INDEX1 INDEX2 INDEX3 SIDE NAME(no blanks) PART_NO SINGLE_LAYER GROUP_LAYER BOM_NAME
CLAMPINGPLATE 1 1 0 ES #_L_* 1 CLPL_MH 02_PLATES 底板
CLAMPINGPLATE 1 1 0 IS #_T_* 2 CLPL_FH 02_PLATES 面板
CAVITYPLATE 1 2 0 ES #_S2_* 3 CAPL_MH 02_PLATES 水口推板
CAVITYPLATE 1 2 0 IS #_S2_* 4 CAPL_FH 02_PLATES 水口推板
INTERMEDIATEPLATE 1 3 0 ES #_U_* 5 INPL_MH 02_PLATES 垫板
INTERMEDIATEPLATE 1 3 0 IS #_U_* 6 INPL_FH 02_PLATES 垫板
RISERS 1 4 0 ES #_C_* 7 RAIL_MH 02_PLATES 方铁
RISERS 1 4 0 IS #_C_* 8 RAIL_FH 02_PLATES 方铁
B_PLATE 1 5 0 ES #_B_* 9 B_PLATE 02_PLATES B板
A_PLATE 1 5 0 IS #_A_* 10 A_PLATE 02_PLATES A板
EJECTORPLATE 1 6 0 ES #_E_* 17 EJPL_MH 02_PLATES 面针板
EJECTORPLATE 1 6 0 IS #_E_* 18 EJPL_FH 02_PLATES 面针板
EJECTORBASEPLATE 1 7 0 ES #_F_* 19 EBPL_MH 02_PLATES 底针板
EJECTORBASEPLATE 1 7 0 IS #_F_* 20 EBPL_FH 02_PLATES 底针板
STRIPPERPLATE 1 8 0 ES #_S1_* 21 STPL_MH 02_PLATES 推板
STRIPPERPLATE 1 8 0 IS #_S2_* 22 STPL_FH 02_PLATES 水口推板
CENTERINGSLEEVE 2 1 0 IS #_SLEEVE** 3** SLEEVE_FH 03_GUIDES Sleeve
BUSH_SHOULDER 2 2 0 IS #_GBB_** 3** BUSHINGS_FH 03_GUIDES 直身导套
BUSH 2 3 0 IS #_GBA_** 3** BUSHINGS_FH 03_GUIDES 有托导套
PILLAR_SHOULDER 2 4 0 IS #_SP_** 3** PILLARS_FH 03_GUIDES 拉杆导柱
PILLAR 2 5 0 IS #_SP_** 3** PILLARS_FH 03_GUIDES 拉杆导柱
EJECTOR_BUSH 2 6 0 IS #_EJP_BUSH** 3** BUSHINGS_FH 03_GUIDES Guide*Bush
EJECTOR_PILLAR 2 7 0 IS #_EJP_PILLAR** 3** PILLARS_FH 03_GUIDES Leaderpin
CENTERINGSLEEVE 2 1 0 ES #_SLEEVE** 3** SLEEVE_MH 03_GUIDES Sleeve
BUSH_SHOULDER 2 2 0 ES #_GBB_** 3** BUSHINGS_FH 03_GUIDES 直身导套
BUSH 2 3 0 ES #_GBA_** 3** BUSHINGS_MH 03_GUIDES 有托导套
PILLAR_SHOULDER 2 4 0 ES #_GP_** 3** PILLARS_MH 03_GUIDES 导柱
PILLAR 2 5 0 ES #_GP_** 3** PILLARS_MH 03_GUIDES 导柱
EJECTOR_BUSH 2 6 0 ES #_EJP_BUSH** 3** BUSHINGS_MH 03_GUIDES Guide*Bush
EJECTOR_PILLAR 2 7 0 ES #_EJP_PILLAR** 3** PILLARS_MH 03_GUIDES Leaderpin
LOCATING_RING 3 1 1 ES #_LOC_MH1 3001 LOCATING_MH 04_EQUIPMENT Locating*Ring
LOCATING_RING 3 2 1 IS #_LOC_FH1 3002 LOCATING_FH 04_EQUIPMENT Locating*Ring
LOCATING_RING 3 1 2 ES #_LOC_MH2 3001 LOCATING_MH 04_EQUIPMENT Locating*Ring
LOCATING_RING 3 2 2 IS #_LOC_FH2 3002 LOCATING_FH 04_EQUIPMENT Locating*Ring
LOCATING_RING 3 1 3 ES #_LOC_MH3 3001 LOCATING_MH 04_EQUIPMENT Locating*Ring
LOCATING_RING 3 2 3 IS #_LOC_FH3 3002 LOCATING_FH 04_EQUIPMENT Locating*Ring
LOCATING_RING 3 1 4 ES #_LOC_MH4 3001 LOCATING_MH 04_EQUIPMENT Locating*Ring
LOCATING_RING 3 2 4 IS #_LOC_FH4 3002 LOCATING_FH 04_EQUIPMENT Locating*Ring
LOCATING_RING 3 1 5 ES #_LOC_MH5 3001 LOCATING_MH 04_EQUIPMENT Locating*Ring
LOCATING_RING 3 2 5 IS #_LOC_FH5 3002 LOCATING_FH 04_EQUIPMENT Locating*Ring
LOCATING_RING 3 1 6 ES #_LOC_MH6 3001 LOCATING_MH 04_EQUIPMENT Locating*Ring
LOCATING_RING 3 2 6 IS #_LOC_FH6 3002 LOCATING_FH 04_EQUIPMENT Locating*Ring
LOCATING_RING 3 1 7 ES #_LOC_MH7 3001 LOCATING_MH 04_EQUIPMENT Locating*Ring
LOCATING_RING 3 2 7 IS #_LOC_FH7 3002 LOCATING_FH 04_EQUIPMENT Locating*Ring
LOCATING_RING 3 1 8 ES #_LOC_MH8 3001 LOCATING_MH 04_EQUIPMENT Locating*Ring
LOCATING_RING 3 2 8 IS #_LOC_FH8 3002 LOCATING_FH 04_EQUIPMENT Locating*Ring
LOCATING_RING 3 1 19 ES #_LOC_MH19 3001 LOCATING_MH 04_EQUIPMENT Locating*Ring
LOCATING_RING 3 2 19 IS #_LOC_FH19 3002 LOCATING_FH 04_EQUIPMENT Locating*Ring
EXT_NOZZLE_SPRUEBUSH 3 2 2 IS #_EXT_NSPRUEBUSH 3012 LOCATING_FH 04_EQUIPMENT Extensionnozzle*Spruebushing
INSULATION 3 3 1 ES #_INS_MH 3003 INSULATION_MH 04_EQUIPMENT Insulation
INSULATION 3 3 2 ES #_INS_MH 3003 INSULATION_MH 04_EQUIPMENT Insulation
INSULATION 3 4 1 IS #_INS_FH 3004 INSULATION_FH 04_EQUIPMENT Insulation
INSULATION 3 4 2 IS #_INS_FH 3004 INSULATION_FH 04_EQUIPMENT Insulation
SPRUE_BUSH 3 5 1 ESIS #_SPRBUSH1 3005 SPRUEBUSH 04_EQUIPMENT Sprue*Bushing
SPRUE_BUSH 3 5 2 ESIS #_SPRBUSH2 3005 SPRUEBUSH 04_EQUIPMENT Sprue*Bushing
SPRUE_BUSH 3 5 3 ESIS #_SPRBUSH3 3005 SPRUEBUSH 04_EQUIPMENT Sprue*Bushing
SPRUE_BUSH 3 5 4 ESIS #_SPRBUSH4 3005 SPRUEBUSH 04_EQUIPMENT Sprue*Bushing
SPRUE_BUSH 3 5 5 ESIS #_SPRBUSH5 3005 SPRUEBUSH 04_EQUIPMENT Sprue*Bushing
RUNNER_BUSHING 3 5 2 IS #_RUNNER_BUSH 3012 RUNNERBUSH 04_EQUIPMENT Runner*Bushing
SUPPORT_BUSH 3 6 1 ESIS #_SUPBUSH 3006 SUPPORTBUSH 04_EQUIPMENT Sprue*Bushing
EJECTOR_ROD 3 7 1 ES #_KNOCKOUT_MH 3007 KNOCKOUT 04_EQUIPMENT Knockout
EJECTOR_ROD 3 7 2 ES #_KNOCKOUT_MH 3007 KNOCKOUT 04_EQUIPMENT Knockout
EJECTOR_ROD 3 7 1 IS #_KNOCKOUT_FH 3007 KNOCKOUT 04_EQUIPMENT Knockout
EJECTOR_ROD 3 7 2 IS #_KNOCKOUT_FH 3007 KNOCKOUT 04_EQUIPMENT Knockout
SIDE_INTERLOCK 3 8 1 ES #_INTERLOCK_MH 3007 INTERLOCK_MH 04_EQUIPMENT Side*Interlock
SIDE_INTERLOCK 3 8 1 IS #_INTERLOCK_FH 3007 INTERLOCK_FH 04_EQUIPMENT Side*Interlock
SIDE_INTERLOCK 3 9 1 ES #_INTERLOCK_MH 3007 INTERLOCK_MH 04_EQUIPMENT Side*Interlock
SIDE_INTERLOCK 3 9 1 IS #_INTERLOCK_FH 3007 INTERLOCK_FH 04_EQUIPMENT Side*Interlock
SIDE_INTERLOCK 3 8 2 ES #_INTERLOCK_MH 3007 INTERLOCK_MH 04_EQUIPMENT Side*Interlock
SIDE_INTERLOCK 3 8 2 IS #_INTERLOCK_FH 3007 INTERLOCK_FH 04_EQUIPMENT Side*Interlock
SIDE_INTERLOCK 3 9 2 ES #_INTERLOCK_MH 3007 INTERLOCK_MH 04_EQUIPMENT Side*Interlock
SIDE_INTERLOCK 3 9 2 IS #_INTERLOCK_FH 3007 INTERLOCK_FH 04_EQUIPMENT Side*Interlock
SIDE_INTERLOCK 3 8 3 ES #_INTERLOCK_MH 3007 INTERLOCK_MH 04_EQUIPMENT Side*Interlock
SIDE_INTERLOCK 3 8 3 IS #_INTERLOCK_FH 3007 INTERLOCK_FH 04_EQUIPMENT Side*Interlock
SIDE_INTERLOCK 3 9 3 ES #_INTERLOCK_MH 3007 INTERLOCK_MH 04_EQUIPMENT Side*Interlock
SIDE_INTERLOCK 3 9 3 IS #_INTERLOCK_FH 3007 INTERLOCK_FH 04_EQUIPMENT Side*Interlock
SCREW_912_88 4 1 0 IS #_SCREW** 4** HSC_SCREW_FH 05_SCREWS 内六角螺钉
SCREW_912_109 4 2 0 IS #_SCREW** 4** HSC_SCREW_FH 05_SCREWS 内六角螺钉
SCREW_6912_88 4 3 0 IS #_SCREW** 4** HSC_SCREW_FH 05_SCREWS 内六角螺钉
SCREW_7991_88 4 4 0 IS #_FHSCREW** 4** CON_SCREW_FH 05_SCREWS 内六角平头螺钉
SHOULDERSCREW 4 5 0 IS #_SHSCREW** 4** SHO_SCREW_FH 05_SCREWS 带肩螺钉
SPRING_PLUNGER 4 6 0 IS #_SPRINGPL** 4** SPRING_PL_FH 05_SCREWS 弹簧柱塞
SETSCREW 4 7 0 IS #_SETSCREW** 4** SET_SCREW_FH 05_SCREWS 紧定螺钉
HOISTRING 4 8 0 IS #_HOIST_RING** 4** HOIST_RING_FH 05_SCREWS 吊环螺钉
SCREW_912_88 4 1 0 ES #_SCREW** 4** HSC_SCREW_MH 05_SCREWS 内六角螺钉
SCREW_912_109 4 2 0 ES #_SCREW** 4** HSC_SCREW_MH 05_SCREWS 内六角螺钉
SCREW_6912_88 4 3 0 ES #_SCREW** 4** HSC_SCREW_MH 05_SCREWS 内六角螺钉
SCREW_7991_88 4 4 0 ES #_FHSCREW** 4** CON_SCREW_MH 05_SCREWS 内六角平头螺钉
SHOULDERSCREW 4 5 0 ES #_SHSCREW** 4** SHO_SCREW_MH 05_SCREWS 带肩螺钉
SPRING_PLUNGER 4 6 0 ES #_SPRINGPL** 4** SPRING_PL_MH 05_SCREWS 弹簧柱塞
SETSCREW 4 7 0 ES #_SETSCREW** 4** SET_SCREW_MH 05_SCREWS 紧定螺钉
HOISTRING 4 8 0 ES #_HOIST_RING** 4** HOIST_RING_MH 05_SCREWS 吊环螺钉
SPRING_WASHER 5 1 0 IS #_SPRWASHER** 5** SCREW_EQUIP_FH 05_SCREWS Spring*Washer
STOP_DISC 5 2 0 IS #_STOPDISC** 5** SCREW_EQUIP_FH 05_SCREWS Stop*Disc
STOP_PIN 5 3 0 IS #_STOPPIN** 5** SCREW_EQUIP_FH 05_SCREWS Stop*Pin
TUBULAR_DOWEL 5 4 0 IS #_TUBDOWEL** 5** SCREW_EQUIP_FH 05_SCREWS TUBULAR*DOWEL
SPRINGS 5 5 1 IS #_SPRING** 5** SPRING_FH 04_EQUIPMENT Spring
SPRINGS 5 5 2 IS #_SPRING**
..........
这个表就是控制装配进来的emx零件后的零件名以及相关层
下面给大家讲解下相关选项的运用
SYSTEMNAME表示零件名称
INDEX1表示类型 比如1就是板 2是导向系统4是螺丝 等等
INDEX2表示零件的型号 对应<emx_loadpoint>mm/\parts里面文件名的后缀的数字 |
|
发表于 2006-5-9 08:55:29
QQ好友和群
QQ空间
腾讯微博
腾讯朋友
收藏
淘帖
赞一下！
楼主