关于ＭＯＵＬＤＦＬＯＷ输出文件

jingk7992 · 发表于 2008-10-14 14:34:12

马上注册，结交更多同行朋友，交流，分享，学习。

您需要登录才可以下载或查看，没有帐号？注册

x

如何看下面这些ＭＯＵＬＤＦＬＯＷ分析结果，请大侠赐教，小弟是菜鸟

Filling phase results summary for the part :

Bulk temperature - maximum
(at
4.906 s) =
252.5450 C

Bulk temperature - 95th percentile
(at
5.082 s) =
251.2430 C

Bulk temperature - 5th percentile
(at
6.389 s) =
214.1860 C

Bulk temperature - minimum
(at
6.379 s) =
105.0260 C

Wall shear stress - maximum
(at
6.389 s) =
0.6826 MPa

Wall shear stress - 95th percentile (at
0.249 s) =
0.3107 MPa

Shear rate - maximum
(at
4.906 s) =
4725.2798 1/s

Shear rate - 95th percentile
(at
0.249 s) =
2489.9800 1/s

End of filling phase results summary for the part :

Total part weight
=
2512.5301 g

Bulk temperature - maximum
=
247.0680 C

Bulk temperature - 95th percentile
=
244.5620 C

Bulk temperature - 5th percentile
=
214.1860 C

Bulk temperature - minimum
=
105.0370 C

Bulk temperature - average
=
233.7720 C

Bulk temperature - RMS deviation
=
12.9527 C

Wall shear stress - maximum
=
0.6826 MPa

Wall shear stress - 95th percentile
=
0.1478 MPa

Wall shear stress - average
=
0.0926 MPa

Wall shear stress - RMS deviation
=
0.0443 MPa

Frozen layer fraction - maximum
=
0.5465

Frozen layer fraction - 95th percentile
=
0.1257

Frozen layer fraction - 5th percentile
=
0.0649

Frozen layer fraction - minimum
=
0.0000