一个9.1版本的后处理(分别显示曲面或者2D余量，Z-最深，支持斜度刀)

boy9981

根据官方版本改进的。（改进后只支持3轴）

改进地方：

如果是2D则显示2D余量，曲面则显示曲面余量，

斜度刀支持。

如果你的系统装了 MCU ，程式后面则会显示 MCU 方式的刀具代码，则在 MCU 模拟时不用重新定义刀具！

%
O0001
( PROGRAM   - 0002.NC)
( DATE      - JUL-07-07)
( TIME      - 16:26)
( MC9 FILE  - F:\ZI\HTML.MC9)
( --------------------------------------------- )  #刀具说明 / 加工方式
(T1 | H1 | D16.00mm | R0.80 |       |M.ROUGH....)  
(T2 | H2 | D12.00mm |       |       |2D-CONTOUR )
(T3 | H3 | D16.00mm |       |       |2D-CONTOUR )
(T4 | H4 | D6.00mm  | R3.00 |       |M.FINISH...)
(T5 | H5 | D8.00mm  |       |A22.22 |2D-CONTOUR )
(T6 | H6 | D25.00mm | R1.00 |A90.   |2D-CONTOUR )
( --------------------------------------------- )
( ------------------- OVERALL MAX - Z50. )
( ------------------- OVERALL MIN - Z-50.623 )  #  整个 NC最深
N100 G00 G17 G21 G40 G80 G90
   ( T1   ----- M.ROUGH.... ) # 刀具编码  加工方式
N102 T1 M06 (16 R0.8 BULL ENDMILL)  # 自定义刀具的名字
N104 (MAX - Z50.)
N106 (MIN - Z-36.904) #  T1  刀具最深
N108 (TOOLPATH - ROUGHPOCK)
N110 (STOCK LEFT ON DRIVE SURFS = 0.123)  #曲面余量
N112 G00 G90 G54 X1.14 Y-41.5 S1909 M03
N114 G43 H1 Z50.
N116 Z5.
N118 G01 Z0. F800.
N120 Y-25.5 F763.6
............
N1420 G91 G28 Z0.
N1422 M01
   ( T2   ----- 2D-CONTOUR  )
N1424 T2 M06 ( 12. FLAT ENDMILL)
N1426 (MAX - Z50.)
N1428 (MIN - Z-37.957)
N1430 (CUT STOCK: XY= 0.234 Z = 0.432)  # 2D余量
N1432 G00 G90 G54 X13. Y-39.734 S3183 M03
N1434 G43 H2 Z50.
N1436 Z10.
N1438 G01 Z-1.867 F800.
..........
N2048 M05
N2050 G91 G28 Z0.
N2052 M01
   ( T3   ----- 2D-CONTOUR  )
N2054 T3 M06 ( 16. FLAT ENDMILL)
N2056 (MAX - Z50.)
N2058 (MIN - Z-50.623)
N2060 (CUT STOCK: XY= -0.321 Z = -0.123)  # 2D余量
N2062 G00 G90 G54 X33. Y-28.179 S1790 M03
N2064 G43 H3 Z50.
...........
N2090 M05
N2092 G91 G28 Z0.
N2094 M01
   ( T4   ----- M.FINISH... )
N2096 T4 M06 (CRN D6 R3)
N2098 (MAX - Z50.)
N2100 (MIN - Z-5.203)
N2102 (TOOLPATH - FINISHPARL) # 加工方式
N2104 (STOCK LEFT ON DRIVE SURFS = -0.236) #曲面余量
N2106 G00 G90 G54 X22.494 Y-9.803 S4074 M03
N2108 G43 H4 Z50.
N2110 Z.296
N2112 G01 Z-4.704 F600.
................
N3016 G00 Z50.
N3018 G17
N3020 (TOOLPATH - FINISHPARL) # 加工方式
N3022 (STOCK LEFT ON DRIVE SURFS = -0.567)  #曲面余量
N3024 X22.772 Y-9.782
N3026 Z-.168
..................
N7604 G00 Z50. M09
N7606 M05
N7608 G91 G28 Z0.
N7610 M01
   ( T6   ----- 2D-CONTOUR  )
N7612 T6 M06 (DEFINE TOOL NAMES)
N7614 (MAX - Z50.)
N7616 (MIN - Z-39.5)
N7618 (CUT STOCK: XY= 0.000 Z = 0.000)  # 2D余量
N7620 G00 G90 G54 X33. Y-33. S2500 M03
N7622 G43 H6 Z50. M07
N7624 Z-28.5
.................
N7646 G00 Z50. M09
N7648 M05
N7650 G91 G28 Z0.
N7652 G28 X0. Y0.
N7654 (MCUSTOCK X66. Y41. Z60. OTC OX0. OY0. OZ0.)  # MCU 刀具定义，直接可以模拟
N7656 (MCUPTOOL  T1 D16. L80. F80. R0.8 C0)
N7658 (MCUPTOOL  T2 D12. L75. F75.)
N7660 (MCUPTOOL  T2 D12. L75. F75.)
N7662 (MCUPTOOL  T3 D16. L75. F75.)
N7664 (MCUPTOOL  T4 D6. L50. F50. R3. C0)
N7666 (MCUPTOOL  T4 D6. L50. F50. R3. C0)
N7668 (MCUPTOOL  T5 D8. L50. F50. A11.1099997)
N7670 (MCUPTOOL  T6 D25. L50. F50. A45.)
N7672 G90
N7674 M30
%

boy9981

hover08ms

boy9981

bababom

屁颠屁颠

panyantao

rocklgc

hyplip

szliwy