【求助】9.1 sp2后处理的问题

donghuei

刀路两个连在一起,9.1 sp2后处理,处理的结果有两个
(UNDEFINED TOOL - 1 DIA. OFF. - 1 LEN. - 1 DIA. - 20.)
N152T1M6
应该有一个才对呀!这问题怎么改呢?因为我们这抬数控洗是没有带刀库所以程序走到第二个这里(UNDEFINED TOOL - 1 DIA. OFF. - 1 LEN. - 1 DIA. - 20.)
N152T1M6 就停了.望各为高手指点!小第在这里先谢谢了!
  
%O0000
(PROGRAM NAME - T)
(DATE=DD-MM-YY - 18-02-04 TIME=HH:MM - 00:48)
N100G21
N102G0G17G40G49G80G90
(UNDEFINED TOOL - 1 DIA. OFF. - 1 LEN. - 1 DIA. - 20.)
N104T1M6
N106G0G90G54X5.072Y-71.929A0.S1909M3
N108G43H1Z50.
N110Z10.
N112G1Z0.F15.
N114Y-51.929F763.6
N116G3X-14.928Y-31.929R20.
N118G1X-80.583
N120G2X-90.583Y-21.929R10.
N122G1Y47.029
N124G2X-80.583Y57.029R10.
N126G1X50.728
N128G2X60.728Y47.029R10.
N130G1Y-21.929
N132G2X50.728Y-31.929R10.
N134G1X-14.928
N136G3X-34.928Y-51.929R20.
N138G1Y-71.929
N140Z10.F15.
N142G0Z50.
N144M5
N150M01
(UNDEFINED TOOL - 1 DIA. OFF. - 1 LEN. - 1 DIA. - 20.)
N152T1M6
N154G0G90G54X-130.583Y-7.45A0.S1909M3
N156G43H1Z50.
N158Z10.
N160G1Z-10.F15.
N162X-110.583F763.6
N164G3X-90.583Y12.55R20.
N166G1Y47.029
N168G2X-80.583Y57.029R10.
N170G1X50.728
N172G2X60.728Y47.029R10.
N174G1Y-21.929
N176G2X50.728Y-31.929R10.
N178G1X-80.583
N180G2X-90.583Y-21.929R10.
N182G1Y12.55
N184G3X-110.583Y32.55R20.
N186G1X-130.583
N188Z0.F15.
N190G0Z50.
N192M5
N198M30
%

yidemold

lgsa

donghuei

lgsa

donghuei

lgsa

zkq604

zkq604

zkq604