iCAx开思网

标题: 野火版中如何将两条线合并成一条线呀 [打印本页]

作者: yzl 时间: 2005-2-18 08:29
标题: 野火版中如何将两条线合并成一条线呀
请问野火版中如何将两条线合并成一条线呀,另外二次投影线也不知怎么使用了?哪位能帮我解答吗?谢谢!

作者: zhu888 时间: 2005-2-18 09:32
PRO/E部分命令对照LIST (PRO/E 2001_to_wf2)
资料来源：https://www.ptc.com/community/proewf2/menu_mapper/en/index.htm
part

Wildfire 2.0 :  Edit > Solidify
2001 : Feature > Create > Solid > Cut > Use Quilt > Solid

Wildfire 2.0 : Edit > Thicken
2001 : Feature > Create > Solid > Cut > Use Quilt > Thin

Wildfire 2.0 : Insert > Hole
2001 : Feature > Create > Solid > Hole

Wildfire 2.0 : Insert > Variable Section Sweep
2001 : Feature > Create > Solid > Cut > Advanced > Solid > Var Sec Swp

Wildfire 2.0 : Edit > Solidify
2001 : Feature > Create > Solid > Protrusion > Use Quilt > Solid

Wildfire 2.0 : Edit > Thicken
2001 : Feature > Create > Solid > Protrusion > Use Quilt > Thin

Wildfire 2.0 : Insert > Variable Section Sweep
2001 : Feature > Create > Solid > Protrusion > Advanced > Solid > Var Sec Swp

Wildfire 2.0 : Insert > Advanced > Radius Dome...
2001 : Feature > Create > Solid > Tweak > Radius Dome

Wildfire 2.0 : Edit > Offset
2001 : Feature > Create > Solid > Tweak > Offset

Wildfire 2.0 : Edit > Offset > Replace Surface Feature
2001 : Feature > Create > Solid > Tweak > Replace

Wildfire 2.0 : Insert > Advance > Ear...
2001 : Feature > Create > Solid > Tweak > Ear

Wildfire 2.0 : Insert > Advanced > Toroidal Bend
2001 : Feature > Create > Solid > Tweak > Toroidal Bend

Wildfire 2.0 : Insert > Advanced > Spinal Bend
2001 : Feature > Create > Solid > Tweak > Spinal Bend

Wildfire 2.0 : Insert > Advanced > Bend Solid
2001 : Feature > Create > Solid > Tweak > Solid Bend

Wildfire 2.0 : Insert > Advanced > Flatten Quilt
2001 : Feature > Create > Solid > Tweak > Flatten Quilt

Wildfire 2.0 : Insert > Sweep > Surface
2001 : Feature > Create > Surface > New > Sweep

Wildfire 2.0 : Insert > Blend > Surface
2001 : Feature > Create > Surface > New > Blend

Wildfire 2.0 : Edit > Fill
2001 : Feature > Create > Surface > New > Flat

Wildfire 2.0 : Edit > Offset
2001 : Feature > Create > Surface > New > Offset

Wildfire 2.0 : Edit > Copy, Edit > Paste
2001 : Feature > Create > Surface > New > Copy

Wildfire 2.0 :  Edit > Copy, Edit > Paste

2001 : Feature > Create > Surface > New > Copy by Trim

Wildfire 2.0 : Insert > Round
2001 : Feature > Create > Surface > New > Fillet

Wildfire 2.0 : Insert > Swept Blend > Surface
2001 : Feature > Create > Surface > New > Advanced > Swept Blend

Wildfire 2.0 : Edit > Merge
2001 : Feature > Create > Surface > Merge

Wildfire 2.0 : Insert > Extrude
2001 : Feature > Create > Surface > Trim > Extrude > Solid

Wildfire 2.0 : Insert > Sweep > Surface Trim
2001 : Feature > Create > Surface > Trim > Sweep > Solid

Wildfire 2.0 : Edit > Trim
2001 : Feature > Create > Surface > Trim > Use Quilt > Solid

Wildfire 2.0 : Edit > Trim
2001 : Feature > Create > Surface > Trim > Use Curves

Wildfire 2.0 : Insert > Advanced > Silhouette Trim
2001 : Feature > Create > Surface > Trim > Vertex Round

Wildfire 2.0 : Insert > Advanced > Silhouette Trim
2001 : Feature > Create > Surface > Trim > Silhouette

Wildfire 2.0 : Insert > Variable Section Sweep
2001 : Feature > Create > Surface > Trim > Advanced > Solid > Var Sec Swp

Wildfire 2.0 : Edit > Extend
2001 : Feature > Create > Surface > Extend

Wildfire 2.0 : Edit > Copy, Edit > Paste Special
2001 : Feature > Create > Surface > Transform > Move

Wildfire 2.0 : Edit > Mirror
2001 : Feature > Create > Surface > Transform > Mirror

Wildfire 2.0 : Edit > Flip Normal...
2001 : Feature > Create > Surface > Transform > Flip Normal

Wildfire 2.0 : Insert > Draft
2001 : Feature > Create > Surface > Draft

Wildfire 2.0 : Edit > Offset
2001 : Feature > Create > Surface > Area Offset

Wildfire 2.0 : Edit > Offset
2001 : Feature > Create > Surface > Draft Offset

Wildfire 2.0 : Insert > Shared Data > Copy Geometry from Other Model
2001 : Feature > Create > Data Sharing > Ext Copy Geom

Wildfire 2.0 : Insert > Shared Data > Merge from Other Model
2001 : Feature > Create > Data Sharing > Ext Merge

Wildfire 2.0 : Insert > Shared Data > Cutout from Other Model
2001 : Feature > Create > Data Sharing > Ext Cutout

Wildfire 2.0 : Edit > Feature Operations > Copy
2001 : Feature > Copy

Wildfire 2.0 : Edit > Feature Operations > Group
2001 : Feature > Group

Wildfire 2.0 : Edit > Resume
2001 : Feature > Resume

Wildfire 2.0 : Edit > Read Only
2001 : Feature > Read Only

Wildfire 2.0 : Select the Part name in the Model Tree > Edit > Mirror
2001 : Feature > Mirror Geom

Wildfire 2.0 : Edit > Value
2001 : Modify > Value

Wildfire 2.0 : Edit > Properties
2001 : Modify > Dimension

Wildfire 2.0 : View > View Manager > Simp Rep > New
2001 : Simplfd Rep > Create

Wildfire 2.0 : Edit > Regenerate
2001 : Regenerate

Wildfire 2.0 : Tools > Relations
2001 : Relations

Wildfire 2.0 : Edit > Setup > Units
2001 : Set Up > Units

Wildfire 2.0 : View > View Manager
2001 : X-section

Assembly

Wildfire 2.0 : Insert > Component > Assemble
2001 : Component > Assemble

Wildfire 2.0 : Insert > Component > Create
2001 : Component > Create

Wildfire 2.0 : Edit > Definition
2001 : Component > Redefine

Wildfire 2.0 : Edit > Replace
2001 : Component > Adv Utils > Replace

Wildfire 2.0 : Edit > Component Operations > Merge
2001 : Component > Adv Utils > Merge

Wildfire 2.0 : Edit > Component Operations > Cut Out
2001 : Component > Adv Utils > Cut Out

Wildfire 2.0 : Insert > Component > Include
2001 : Component > Adv Utils > Include

Wildfire 2.0 : Edit > Component Operations > Group
2001 : Component > Adv Utils > Group

Wildfire 2.0 : Insert > Hole
2001 : Feature > Create > Solid > Hole

Wildfire 2.0 : Edit > Activate
2001 : Modify > Mod Part

Wildfire 2.0 : View > View Manager > Simp Rep
2001 : Simplfd Rep

Wildfire 2.0 : View > View Manager > Explode
2001 : Explode State

Wildfire 2.0 : Edit > Setup
2001 : Set Up > Units

Drawing

Wildfire 2.0 : Insert > Drawing View
2001 : View > Add View
In Pro/ENGINEER Wildfire 2.0, all Drawing View related menu managers have been consolidated into a new, easy to use dialog that gives you visual feedback while you are defining or modifying drawing views. As you advance from section to section, the view on the drawing sheet updates to your latest change. The Drawing View dialog is activated when a new drawing view is created or when an existing drawing view is modified.


Wildfire 2.0 : Click on View and Drag [RMB > Make sure Lock View Movement is unchecked]
2001 : View > Move View

Wildfire 2.0 : Edit > Properties or Double Click a View
2001 : View > Modify View

Wildfire 2.0 :  Edit > Delete
2001 : View > Delete View

Wildfire 2.0 : Edit > Group > Relate to View
2001 : View > Relate View

Wildfire 2.0 : Edit > Properties > View Display section of Drawing View dialog
2001 : View > Disp Mode > View Disp

Wildfire 2.0 : View > Drawing Display > Edge Display
2001 : View > Disp Mode > Edge Disp

Wildfire 2.0 : View > Drawing Display > Component Display
2001 : View > Disp Mode > Member Disp

Wildfire 2.0 : File > Properties > Drawing Models
2001 : View > Dwg Models

Wildfire 2.0 : File > Properties > Drawing Options
2001 : Advanced > Draw Setup

作者: zhu888 时间: 2005-2-18 09:40
请问野火版中如何将两条线合并成一条线呀,

***
选中一条曲线，按复制，再按粘贴，就可以选择相连的曲线了，再OK，就会复合出一条新曲线，但这是复制，不能算完全的复合吧
注：选线有技巧，当了出现细红线时，是没有选中，要出现粗红线才是到线的
在选择过滤器中，用Geomertry选择容易选取中！！！

另外二次投影线也不知怎么使用了?哪位能帮我解答吗?谢谢!

**
做好两条线
都选中
EDIT/INTERSECT

在这里可找到你要的东西:

https://www.ptc.com/community/proewf2/menu_mapper/en/index.htm

作者: nickha888 时间: 2005-2-18 09:56
利害呀,这个网站还真不错.......多谢喽..

作者: zmil798 时间: 2006-7-14 11:52
利害呀,这个网站还真不错.......多谢喽..

作者: alice-1 时间: 2006-7-14 11:55
1.複合

2.相交

作者: 不老鱼 时间: 2006-7-14 12:35
两条线合并到一条线,偶才疏学浅，proe里就没这个命令，除了在style里的合并。
从nurbs曲线的原理来讲，如果多条曲线合并到一条曲线，除非相接出的曲率2级连续，才能合并且不改变原形状曲率。proe是个非常严谨的软件，自然没有这个命令。
熟悉imageware的就知道，里面有个合并命令，将两条曲线合并，必须选择一个去变化，以适应另外一条的曲率。这与proe的严谨性是相悖的。Style就改变了这种状况。
随便说说，不知道我的理解又没有错误。。。。。

欢迎光临 iCAx开思网 (https://www.icax.org/)