pm5.5中把各种加工方式分类加入右键菜单---方便 - iCAx开思网

zcmzcm wrote:
可不可以设成快捷键啊，如果可以的话就好了。

zhl77586 wrote:
以下是自定义快捷菜单效果:

zhl77586 wrote:
本人的user_menu文件敬请参考以下为此文件内容:
  U user_menu
  T "ZHL MENU"
  S
  I "刷新隐藏" 1 "UNDRAW TOOL ALL UNDRAW PATTERN ALL UNDRAW BOUNDARY ALL UNDRAW FEATURESET ALL REFRESH"
  S
  M "粗加工"
  I "偏置" 1 "IMPORT TEMPLATE ENTITY TOOLPATH D:\ZHLhome\myPTF\Offset-AreaClear-Model.ptf FORM TOOLPATH"
  I "平行" 1 "IMPORT TEMPLATE ENTITY TOOLPATH D:\ZHLhome\\myPTF\Raster-AreaClear-Model.ptf FORM TOOLPATH"
  I "轮廓" 1 "IMPORT TEMPLATE ENTITY TOOLPATH D:\ZHLhome\\myPTF\Profile-AreaClear-Model.ptf FORM TOOLPATH"
  Z
  M "精加工"
  I "等高" 1 "IMPORT TEMPLATE ENTITY TOOLPATH D:\ZHLhome\myPTF\Constant-Z-Finishing.ptf FORM TOOLPATH"
  I "平行" 1 "IMPORT TEMPLATE ENTITY TOOLPATH D:\ZHLhome\myPTF\Raster-Finishing.ptf FORM TOOLPATH"
  I "三维偏置" 1 "IMPORT TEMPLATE ENTITY TOOLPATH D:\ZHLhome\myPTF\3D-Offset-Finishing.ptf FORM TOOLPATH"
  I "参考线" 1 "IMPORT TEMPLATE ENTITY TOOLPATH D:\ZHLhome\myPTF\Pattern-Finishing.ptf FORM TOOLPATH"
  I "放射线" 1 "IMPORT TEMPLATE ENTITY TOOLPATH D:\ZHLhome\myPTF\Radial-Finishing.ptf FORM TOOLPATH"
  M "清角"
  I "沿着" 1 "IMPORT TEMPLATE ENTITY TOOLPATH D:\ZHLhome\myPTF\Corner-Along-Finishing.ptf FORM TOOLPATH"
  I "笔式" 1 "IMPORT TEMPLATE ENTITY TOOLPATH D:\ZHLhome\myPTF\Corner-Pencil-Finishing.ptf FORM TOOLPATH"
  I "自动" 1 "IMPORT TEMPLATE ENTITY TOOLPATH D:\ZHLhome\myPTF\Corner-Automatic-Finishing.ptf FORM TOOLPATH"
  I "缝合" 1 "IMPORT TEMPLATE ENTITY TOOLPATH D:\ZHLhome\myPTF\Corner-Stitch-Finishing.ptf FORM TOOLPATH"
  I "多笔" 1 "IMPORT TEMPLATE ENTITY TOOLPATH D:\ZHLhome\myPTF\Corner-MultiPencil-Finishing.ptf FORM TOOLPATH"
  Z
  M "投影"
  I "曲线" 1 "IMPORT TEMPLATE ENTITY TOOLPATH D:\ZHLhome\myPTF\Projection-Curve-Finishing.ptf FORM TOOLPATH"
  I "直线" 1 "IMPORT TEMPLATE ENTITY TOOLPATH D:\ZHLhome\myPTF\Projection-Line-Finishing.ptf FORM TOOLPATH"
  I "平面" 1 "IMPORT TEMPLATE ENTITY TOOLPATH D:\ZHLhome\myPTF\Projection-Plane-Finishing.ptf FORM TOOLPATH"
  I "点" 1 "IMPORT TEMPLATE ENTITY TOOLPATH D:\ZHLhome\myPTF\Projection-Point-Finishing.ptf FORM TOOLPATH"
  I "曲面" 1 "IMPORT TEMPLATE ENTITY TOOLPATH D:\ZHLhome\myPTF\Projection-Surface-Finishing.ptf FORM TOOLPATH"
  Z
  I "最佳等高" 1 "IMPORT TEMPLATE ENTITY TOOLPATH D:\ZHLhome\myPTF\Optimised-Constant-Z-Finishing.ptf FORM TOOLPATH"
  I "嵌入线" 1 "IMPORT TEMPLATE ENTITY TOOLPATH D:\ZHLhome\myPTF\Embedded-Pattern-Finishing.ptf FORM TOOLPATH"
  I "轮廓" 1 "IMPORT TEMPLATE ENTITY TOOLPATH D:\ZHLhome\myPTF\Profile-Finishing.ptf FORM TOOLPATH"
  I "旋转" 1 "IMPORT TEMPLATE ENTITY TOOLPATH D:\ZHLhome\myPTF\Rotary-Finishing.ptf FORM TOOLPATH"
  I "螺旋" 1 "IMPORT TEMPLATE ENTITY TOOLPATH D:\ZHLhome\myPTF\Spiral-Finishing.ptf FORM TOOLPATH"
  I "SWARF" 1 "IMPORT TEMPLATE ENTITY TOOLPATH D:\ZHLhome\myPTF\Swarf-Finishing.ptf FORM TOOLPATH"
  Z
  I "钻孔" 1 "IMPORT TEMPLATE ENTITY TOOLPATH D:\ZHLhome\myPTF\Drilling.ptf FORM TOOLPATH"
  #S
  #I "ISO查看" 1 "UNDRAW TOOL ALL REFRESH ROTATE TRANSFORM ISO2"
  #I "+Z查看" 1 "UNDRAW TOOL ALL REFRESH ROTATE TRANSFORM TOP"
  #I "-Y查看" 1 "UNDRAW TOOL ALL REFRESH ROTATE TRANSFORM FRONT"
  #I "+X查看" 1 "UNDRAW TOOL ALL REFRESH ROTATE TRANSFORM RIGHT"
  #I "+Y查看" 1 "UNDRAW TOOL ALL REFRESH ROTATE TRANSFORM BACK"
  #I "-X查看" 1 "UNDRAW TOOL ALL REFRESH ROTATE TRANSFORM LEFT"
  S
  I "之形" 1 "EDIT TOOLPATH ZIGZAG"
  I "反向" 1 "EDIT TOOLPATH REVERSE"
  I "反顺序" 1 "EDIT TOOLPATH REVERSE_ORDER"
  S
  I "缺省连接" 1 "MACRO D:\ZHLHOME\PMILL4\LEADS.MAC"
  I "圆弧连接" 1 "MACRO D:\ZHLHOME\PMILL4\ARCLEADS.MAC"
  I "安全基准" 1 "EDIT SAFZ 25 EDIT STAZ 5 EDIT DATUM X 0 EDIT DATUM Y 0 EDIT DATUM Z 50 RESET TOOLPATH RAPID RESET TOOLPATH DATUM"
  S
  I "打开模型" 1 "IMPORT MODEL FILEOPEN"
  Z
  
  注意其中D:\ZHLhome\myPTF文件夹为自建文件夹其中存放各种加工方式的.ptf文件这些文件是从pmill中自带原文件复制过来的

hongjun008 wrote:
這樣設定太麻煩了啊

xinghai wrote:
快捷键也是可以设置的，
  我的就设成了，F4到F11，每个键对应自己最常用的命令，
  比如设置旋转中心，删除，刀路模拟等等，
  也可以用ctrl和alt键加字母或数字的。只是我觉得那样要用两只手按，
  呵呵，没有F键快，
  我在网吧，下次把我设置的整理一下，再发上来。