【题目】模具型芯加工.有兴趣的玩一下.

[quote]RAY wrote:
Climb milling or down-milling is when the work is moved in the same direction as the rotation of the cutter. Full engagement of the tooth is instantaneous. The sliding action of conventional milling is eliminated resulting in a better surface finish and longer tool life.   
   
多发了一个，请版主删掉此帖，谢谢

[quote]RAY wrote:
Climb milling or down-milling is when the work is moved in the same direction as the rotation of the cutter. Full engagement of the tooth is instantaneous. The sliding action of conventional milling is eliminated resulting in a better surface finish and longer tool life.   
  
兄弟，今天详细看了一下，你的刀路要是用高速铣还差不多。不要死啃书本，为啥先钻孔都没有看出来？你说的哪个情况，我认为洋鬼子就是不会用，还有，你的清根次序问题大了，怪不得容易过切和打刀

今天从前到后看了该帖,全是pm在大显神威!把UGcam说得很不值钱!明天让你们看看我编的!为ugcam找回点面子!

黑萝卜 wrote:
等了两天，本想学学怎么做的，没人响应，只好把我做的拿上来供大家批评了

  
黑先生，你那倒数第二个特征是怎么回事？老夫硬是没看懂。还望指点。

用映象处理出的jpeg图片质量有点不清楚,请各位谅解!:I:I
  
d25r5开粗刀路!从外面进刀,深度优先,仿毛坯加工,所以刀路提刀很少!

开粗模拟加工

d10平刀局部开粗之一

d10平刀局部开粗之二

d10平刀局部开粗之三

d10平刀局部开粗之四