【讨论】Mastercam还能风光依旧吗？

MASTERCAM我用了4年多，所编的刀路走刀不合理，但它仍有优势：通俗易好学。但比起UG和PROE真的差很远，如果经再不改进会掉队的。

wyzwyz wrote:
MASTERCAM我用了4年多，所编的刀路走刀不合理，但它仍有优势：通俗易好学。但比起UG和PROE真的差很远，如果经再不改进会掉队的。

  
          真怀疑你有没有真正用过MASTERCAM，除了易用性外，你全都说反了，因为这三种我都用过。

In 2004, the top 10 CAM vendors, based on vendor revenues are projected to be: UGS PLM Solutions (with projected CAM revenues of $115 million, and a 15.1% market share); IBM/Dassault--$104 million, 13.7% share); Hitachi Zosen--$61 million, 8% share); PTC--$60 million, 7.9% share); Delcam--$43.1 million, 5.7% share); Tebis--$26.0 million, 3.4% share); Missler--$25.0 million, 3.3% share); Cimatron--$24.0 million, 3.2% share); Sescoi--$21 million, 2.8% share);and Vero International--$18.5 million, 2.4% share). In 2003, Vero International was ranked in the eleventh position, with estimated CAM revenues of $16.3 million.  
  
Mastercam 已不在Top 10之列了,可惜.

童童 wrote:
In 2004, the top 10 CAM vendors, based on vendor revenues are projected to be: UGS PLM Solutions (with projected CAM revenues of $115 million, and a 15.1% market share); IBM/Dassault--$104 million, 13.7% share); Hitachi Zosen--$61 million, 8% share); PTC--$60 million, 7.9% share); Delcam--$43.1 million, 5.7% share); Tebis--$26.0 million, 3.4% share); Missler--$25.0 million, 3.3% share); Cimatron--$24.0 million, 3.2% share); Sescoi--$21 million, 2.8% share);and Vero International--$18.5 million, 2.4% share). In 2003, Vero International was ranked in the eleventh position, with estimated CAM revenues of $16.3 million.   
   
  Mastercam 已不在Top 10之列了,可惜.

  
这全是你自己说的.看看前面那张统计表吧!照你这样说,被卖掉的应该是MASTERCAM而不是UG.可事实正相反!我敢说MASTERCAM和AUTOCAD.永远不会被卖掉.而UG和PTC...

Mastercam应该还能红一段。

童童 wrote:
In 2004, the top 10 CAM vendors, based on vendor revenues are projected to be: UGS PLM Solutions (with projected CAM revenues of $115 million, and a 15.1% market share); IBM/Dassault--$104 million, 13.7% share); Hitachi Zosen--$61 million, 8% share); PTC--$60 million, 7.9% share); Delcam--$43.1 million, 5.7% share); Tebis--$26.0 million, 3.4% share); Missler--$25.0 million, 3.3% share); Cimatron--$24.0 million, 3.2% share); Sescoi--$21 million, 2.8% share);and Vero International--$18.5 million, 2.4% share). In 2003, Vero International was ranked in the eleventh position, with estimated CAM revenues of $16.3 million.   
  
  Mastercam 已不在Top 10之列了,可惜.

  
好象是Cimdata的报告.

我用MCAM多年，6。12曾是很火的。。。
               后来是7。2B    。。。
             再后来是8。1    。。。
             再后来是9。0    。。。   
             再后来是9。1SP2    对多年经验的来说太爽了。
  
    &nbspM  算新生，大有钱途。。。。            

Mastercam是我我最早接触的3d软件，玩到一定程度还是很好的，

哎,看到前面的这个多的前辈都在各诉己见,也真的看懵了.到底那个 软件好了,我真的看到现在都没什么结论.因为我现在还是一个新入门者,没实际用过什么软件,说不出自己的心德.感觉都好吧,呵呵!~~~~~但我究竟学的时候该偏重哪个软件了,哎,真拿不准注意了

答案没有绝对的，因人而异，但是有一点是你熟练了就是最好的