hi.mr.adar:
i'm sorry i don't know what meaning of the #1100,even the others e.g:
#1000-#1031 and #1100-#1131. so please tell me .you email to me, thus i can study from yours.
in fact ,i study the macro only for two years.just the program I have pasted form another place.
and the program is used the process of Mould manufacturing.
G65H01P#1100Q1 (#1100=1)
把PLC內的F162.0設為1 TURE
G4X0.5
G90
G65H01P#1100Q0 (#1100=0)
把PLC內F162.0設為0 FALSE,意思就好像在按SWITCH一樣而我寫的PLC做處理後如果讀到M00就會將AUTO的模式轉到HANDLE的模式這樣使用者就不必用手將AUTO模式切換到HANDLE的模式。
M00(MOVE EDGEFINDER AT X FIRST POINT THEN PRESS CYCLE START)
寫了一堆看了偶自己頭都暈了!
thank you very much.
by the way, which indusry are you working? if possible, we can more
communicate each other about the fanuc macro. and i will paste more macro to you thus you can explain it for all members.
wuleizy wrote:
thank you very much.
by the way, which indusry are you working? if possible, we can more
communicate each other about the fanuc macro. and i will paste more macro to you thus you can explain it for all members.
Hi Wuleizy
I am a CNC machine service & application engineer work for machine tools manufacture since 1984,if you have any problem with program or control please don't hesitate to contact with me.
Hi Wuleizy
I am a CNC machine service & application engineer work for machine tools manufacture since 1984,if you have any problem with program or control please don't hesitate to contact with me.
ant wrote:
两三年前,做手工编程(同时也操机,现在想起来真是机会难得)时,看书学会了宏程式,用他来做标准化的产品,对与一天做10种型号(一两件)真是爽极了,以前编10min的程式 不用1min就搞定,还万无一失,还大大缩短了加工时间,可是没一个人识货(也可能是我没耐心,或不会表现),就南下。现在,虽然不在手工编程,但也做些宏程式来弥补系统功能的不足之处,大大提高了效率,减少了人为错误.