另外,原始的安装说明针对某部分电脑会运行不了,这是我反复摸索后,在重新安装操作系统一次,才找到的正确安装方法.
1. Install "Plastics Insight 6.1", including "Product Security"
2. Optionally install "CAD Doctor 3.0" & "Magics STL Expert 3.0", "Design Link 5.3"
3. Stop "Moldflow Product Security" and "Plastics Insight 6.1 Job Manager" service if it runs.
4. Put MF2007_fix.exe to "Program Files\Moldflow\Product Security\" and run it there.
5. Put MF2007_fix.exe to "Program Files\Moldflow\Plastics Insight 6.1\bin" and run it there.
6. If you done #2, run MF2007_fix.exe in:
"Program Files\Moldflow\CAD Doctor 3.0\bin",
"Program Files\Moldflow\Design Link 5.3\bin",
"Program Files\Moldflow\Design Link 5.3\Backup\pre_5.3000\bin" (depending on updates installed)
7. Put mfpsd.exe & keyfile to "Program Files\Moldflow\Product Security\"
8. Start "Moldflow Product Security" service and wait some time (1 min), or reboot
Warning: set your firewall to block any internet connection of MF products.
In order to desactive 'Performance Logging': File -> Preferences ->Internet ->Upload:never
cad-doctor-300安装后是日文版的
进入CAD Doctor 3.0\config
打开CadDoctor.ini
在
[System]
; Stack size while serializing (MB)
StackSizeAtSerializing=250
UseThreadForSerialize=False
加上一行
Locale=English
[ 本帖最后由 hycad 于 2007-6-25 15:01 编辑 ] |
发表于 2007-6-25 14:59:58
