Pro/ENGINEER[$reg] 2001
Configuration File Options
Topic Collection
Parametric Technology Corporation
Copyright [$copy] 2000 Parametric Technology Corporation. All Rights Reserved.
User documentation from Parametric Technology Corporation (PTC) is subject to copyright laws of the United States and
other countries and is provided under a license agreement, which restricts copying, disclosure, and use of such
documentation. PTC hereby grants to the licensed user the right to make copies in printed form of PTC user
documentation provided on software or documentation media, but only for internal, noncommercial use by the licensed
user in accordance with the license agreement under which the applicable software and documentation are licensed. Any
copy made hereunder shall include the Parametric Technology Corporation copyright notice and any other proprietary
notice provided by PTC. User documentation may not be disclosed, transferred, or modified without the prior written
consent of PTC and no authorization is granted to make copies for such purposes.
Information described in this document is furnished for general information only, is subject to change without notice, and
should not be construed as a warranty or commitment by PTC. PTC assumes no responsibility or liability for any errors
or inaccuracies that may appear in this document.
The software described in this document is provided under written license agreement, contains valuable trade
secrets and proprietary information, and is protected by the copyright laws of the United States and other countries.
UNAUTHORIZED USE OF SOFTWARE OR ITS DOCUMENTATION CAN RESULT IN CIVIL DAMAGES AND
CRIMINAL PROSECUTION.
Registered Trademarks of Parametric Technology Corporation or a Subsidiary
Advanced Surface Design, CADDS, CADDShade, Computervision, Computervision Services, dVISE,
Electronic Product Definition, EPD, HARNESSDESIGN, Info*Engine, InPart, MEDUSA, Optegra,
Parametric Technology Corporation, Pro/ENGINEER, Pro/INTRALINK, Pro/MECHANICA, Pro/TOOLKIT, PTC,
PT/Products, and Windchill.
Trademarks of Parametric Technology Corporation or a Subsidiary
3DPAINT, Associative Topology Bus, Behavioral Modeler, CDRS, CV, CVact, CVaec, CVdesign, CV-DORS, CVMAC,
CVNC, CVToolmaker, DesignSuite, DIMENSION III, DIVISION, DIVISION EchoCast, dVSAFEWORK, dVS,
e-Series, EDE, e/ENGINEER, Electrical Design Entry, EPD.Connect, EPD Roles, EPD.Visualizer, Expert Machinist,
Expert Toolmaker, Flexible Engineering, i-Series, ICEM, ICEM DDN, ICEM Surf, Import Data Doctor,
Information for Innovation, ISSM, MEDEA, ModelCHECK, NC Builder, Parametric Technology, Pro/ANIMATE,
Pro/ASSEMBLY, Pro/CABLING, Pro/CASTING, Pro/CDT, Pro/COMPOSITE, Pro/CMM, Pro/CONVERT,
Pro/DATA for PDGS, Pro/DESIGNER, Pro/DESKTOP, Pro/DETAIL, Pro/DIAGRAM, Pro/DIEFACE, Pro/DRAW,
Pro/ECAD, Pro/ENGINE, Pro/FEATURE, Pro/FEM-POST, Pro/FLY-THROUGH, Pro/HARNESS-MFG,
Pro/INTERFACE for CADDS 5, Pro/INTERFACE for CATIA, Pro/INTRALINK Web Client, Pro/LANGUAGE,
Pro/LEGACY, Pro/LIBRARYACCESS, Pro/MESH, Pro/Model.View, Pro/MOLDESIGN, Pro/NC-ADVANCED,
Pro/NC-CHECK, Pro/NC-MILL, Pro/NC-SHEETMETAL, Pro/NC-TURN, Pro/NC-WEDM, Pro/NC-Wire EDM,
Pro/NCPOST, Pro/NETWORK ANIMATOR, Pro/NOTEBOOK, Pro/PDM, Pro/PHOTORENDER,
Pro/PHOTORENDER TEXTURE LIBRARY, Pro/PIPING, Pro/PLASTIC ADVISOR, Pro/PLOT,
Pro/POWER DESIGN, Pro/PROCESS, Pro/REFLEX, Pro/REPORT, Pro/REVIEW, Pro/SCAN-TOOLS,
Pro/SHEETMETAL, Pro/SURFACE, Pro/VERIFY, Pro/Web.Link, Pro/Web.Publish, Pro/WELDING,
Product Structure Navigator, PTC i-Series, Shaping Innovation, Shrinkwrap, Virtual Design Environment,
Windchill e-Series, Windchill Factor, Windchill Factor e-Series, Windchill Information Modeler, PTC logo,
CV-Computervision logo, DIVISION logo, ICEM logo, InPart logo, and Pro/REFLEX logo.
Third-Party Trademarks
Oracle is a registered trademark of Oracle Corporation. Windows and Windows NT are registered trademarks of
Microsoft Corporation. CATIA is a registered trademark of Dassault Systems. PDGS is a registered trademark of
Ford Motor Company. SAP and R/3 are registered trademarks of SAP AG Germany. FLEXlm is a registered
trademark of Globetrotter Software Inc. VisTools library is copyrighted software of Visual Kinematics, Inc. (VKI)
containing confidential trade secret information belonging to VKI. HOOPS graphics system is a proprietary software
product of, and copyrighted by, Tech Soft America, Inc. All other brand or product names are trademarks or
registered trademarks of their respective holders.
UNITED STATES GOVERNMENT RESTRICTED RIGHTS LEGEND
This document and the software described herein are Commercial Computer Documentation and Software, pursuant
to FAR 12.212(a)-(b) or DFARS 227.7202-1(a) and 227.7202-3(a), and are provided to the Government under a
limited commercial license only. For procurements predating the above clauses, use, duplication, or disclosure by the
Government is subject to the restrictions set forth in subparagraph (c)(1)(ii) of the Rights in Technical Data and
Computer Software Clause at DFARS 252.227-7013 or Commercial Computer Software-Restricted Rights at
FAR 52.227-19, as applicable.
Parametric Technology Corporation, 128 Technology Drive, Waltham, MA 02453-8905 6 September 2000
Configuration File Options 3
Table of Contents
About Configuration File Options....................................................................31
dialog_translation..............................................................................................31
accuracy_lower_bound.....................................................................................31
add_weld_mp.....................................................................................................31
allow_move_view_with_move..........................................................................31
allow_cycle_optimize ........................................................................................31
allow_move_in_dtl_move.....................................................................31
allow_old_style_round......................................................................................32
allow_ply_cross_section ..................................................................................32
allow_redo_intersections..................................................................................32
allow_ref_scope_change ..................................................................................32
allow_refs_to_geom_reps_in_drws.................................................................32
allow_rfs_default_gtols_always.......................................................................32
allow_udf_style_cosm_threads........................................................................32
ang_dim_in_screen ...........................................................................................33
angular_tol_0.0 ..................................................................................................33
assy_mfg_open_mode......................................................................................33
angular_tol .........................................................................................................33
ang_units............................................................................................................33
auto_assembly_with_layouts...........................................................................34
auto_associate_dimensions.............................................................................34
auto_convert_cables.........................................................................................34
auto_regen_views..............................................................................................34
4 Configuration File Options
bell.......................................................................................................................34
bitmap_size ........................................................................................................34
blank_layer.........................................................................................................35
bom_format........................................................................................................35
button_name_in_help........................................................................................35
cadam_line_weights..........................................................................................35
capped_clip........................................................................................................35
campost_dir .......................................................................................................35
catia_translator ..................................................................................................35
catia_out_to_existing_model ...........................................................................36
cdt_transfer_details...........................................................................................36
chk_part_surfs_profpock..................................................................................36
cgm_inc_pad_byte_in_length ..........................................................................36
cgm_use_enum_in_real_spec..........................................................................36
cgm_use_reversed_ieee_floats .......................................................................36
chamfer_45deg_dim_text..................................................................................37
clip_always.........................................................................................................37
cl_arrow_scale...................................................................................................37
clock....................................................................................................................37
clr_print_plus_minus ........................................................................................37
color ....................................................................................................................37
color_ramp_size ................................................................................................37
color_resolution.................................................................................................38
color_windows...................................................................................................38
comp_assemble_start.......................................................................................38
Configuration File Options 5
comp_rollback_on_redef ..................................................................................38
company_name..................................................................................................38
compress_output_files .....................................................................................38
copy_dxf_dim_pict ............................................................................................39
copy_geom_update_pre_2000i_dep................................................................39
create_drawing_dims_only...............................................................................39
create_fraction_dim...........................................................................................39
create_numbered_layers ..................................................................................39
custom_rainbow ................................................................................................39
datum_point_symbol.........................................................................................40
dazix_default_placement_unit..........................................................................40
dazix_export_mounthole ..................................................................................40
dazix_z_translation............................................................................................40
default_abs_accuracy .......................................................................................40
default_ang_dec_places ...................................................................................40
default_dec_places............................................................................................40
default_dim_num_digits_changes...................................................................40
default_draw_scale............................................................................................41
default_ext_ref_scope.......................................................................................41
default_font ........................................................................................................41
default_object_invalid_refs ..............................................................................41
default_object_scope_setting ..........................................................................42
default_ramp_size .............................................................................................42
default_ship_breadth ........................................................................................42
default_ship_lbp ................................................................................................42
6 Configuration File Options
def_layer .............................................................................................................42
delete_after_plotting .........................................................................................43
del_gp_memb_ind .............................................................................................43
dim_fraction_format..........................................................................................43
dim_fraction_denominator ...............................................................................43
dim_offscreen_limit...........................................................................................43
display ................................................................................................................44
display_planes...................................................................................................44
display_plane_tags............................................................................................44
display_axes ......................................................................................................44
display_axis_tags..............................................................................................44
display_coord_sys ............................................................................................44
display_coord_sys_tags...................................................................................45
display_points....................................................................................................45
display_point_tags ............................................................................................45
display_comps_to_assemble...........................................................................45
display_dwg_tol_tags .......................................................................................45
display_full_object_path...................................................................................46
display_in_adding_view....................................................................................46
display_layer ......................................................................................................46
display_silhouette_edges.................................................................................46
dir_cache_max...................................................................................................46
disp_trimetric_dwg_mode_view ......................................................................46
draw_models_read_only...................................................................................47
draw_points_in_model_units ...........................................................................47
Configuration File Options 7
drawing_file_editor............................................................................................47
drawing_setup_file ............................................................................................47
drawing_view_origin_csys ...............................................................................47
dwg_select_across_pick_box ..........................................................................47
dxf_out_stroke_text...........................................................................................47
ecad_area_default_import ................................................................................48
ecad_board_csys_def_name............................................................................48
ecad_comp_csys_def_name ............................................................................48
ecad_create_hint_add.......................................................................................48
ecad_default_comp_height ..............................................................................48
ecad_export_holes_as_cuts.............................................................................48
ecad_import_holes_as_features......................................................................48
ecad_other_outl_csys_def_name ....................................................................49
ecad_mapping_file ............................................................................................49
edge_display_quality ........................................................................................49
enable_absolute_accuracy...............................................................................49
enable_cadra_export.........................................................................................49
enable_popup_help...........................................................................................49
explode_iges_dimension_note ........................................................................50
extend_cvpath....................................................................................................50
fail_if_sec_regen_warning................................................................................50
fail_ref_copy_when_missing_orig...................................................................50
fail_unattached_feature ....................................................................................50
family_table_editor ............................................................................................50
fasthlr..................................................................................................................51
8 Configuration File Options
feature_create_auto_begin...............................................................................51
feature_create_auto_ok ....................................................................................51
fem_asp_ratio ....................................................................................................51
fem_default_solver............................................................................................51
fem_dist_index...................................................................................................51
fem_edge_angle.................................................................................................51
fem_feas_convertor...........................................................................................52
fem_geom_associativity ...................................................................................52
fem_ignore_unpaired ........................................................................................52
fem_max_memory_usage.................................................................................52
fem_mid_ratio ....................................................................................................52
fem_neutral_version..........................................................................................52
fem_old_quad_mesher......................................................................................52
fem_remove_unopposed ..................................................................................52
fem_skew_angle ................................................................................................53
fem_solver_time_limit.......................................................................................53
fem_supertab_version ......................................................................................53
fem_taper............................................................................................................53
fem_warp_angle.................................................................................................53
fem_which_ansys_solver .................................................................................53
fem_y_dir_compress.........................................................................................53
file_open_default_folder ...................................................................................53
fit_object_in_window ........................................................................................54
fix_autocad_iges_text_scale ............................................................................54
fix_boundaries_on_import................................................................................54
Configuration File Options 9
fix_catia_iges_sym_note ..................................................................................54
fix_imported_set_view_orient ..........................................................................54
fix_refs_to_intersections ..................................................................................54
flip_arrow_scale.................................................................................................55
fonts_size ...........................................................................................................55
force_wireframe_in_drawings..........................................................................55
format_setup_file...............................................................................................55
frames_per_sec .................................................................................................55
frames_per_sec_value ......................................................................................55
freeform_toolpath_matrem...............................................................................55
freeze_failed_assy_comp .................................................................................55
full_hlr_for_cables.............................................................................................56
gerber_360_interpolation..................................................................................56
graphics..............................................................................................................56
grid_snap............................................................................................................56
gtol_dim_placement..........................................................................................56
help_translation .................................................................................................56
highlight_erased_dwg_views...........................................................................57
highlight_new_dims ..........................................................................................57
hlr_for_quilts......................................................................................................57
hole_diameter_override ....................................................................................57
hull_collar_prefix ...............................................................................................57
hull_collar_placement.......................................................................................57
hull_collar_section_file .....................................................................................58
hull_flange_width ..............................................................................................58
10 Configuration File Options
hull_material_desc_file .....................................................................................58
hull_material_code ............................................................................................58
hull_cutout_section_file....................................................................................58
hull_endcut_section_file...................................................................................58
hull_hole_section_file .......................................................................................58
hull_plate_prefix ................................................................................................58
hull_plate_stock_file .........................................................................................59
hull_plate_thickness .........................................................................................59
hull_plate_thickness_x .....................................................................................59
hull_plate_thickness_y .....................................................................................59
hull_plate_thickness_z......................................................................................59
hull_plate_bradius.............................................................................................59
hull_stiffener_prefix ..........................................................................................59
hull_stiffener_stock_file....................................................................................59
hull_stiffener_section_file ................................................................................60
hull_stiffener_flange_x......................................................................................60
hull_stiffener_flange_y......................................................................................60
hull_stiffener_flange_z......................................................................................60
hull_stiffener_web_x .........................................................................................60
hull_stiffener_web_y .........................................................................................60
hull_stiffener_web_z .........................................................................................61
iconify_entire_pro..............................................................................................61
iges_clip_view_note..........................................................................................61
iges_export_dwg_views....................................................................................61
iges_in_106_f2_as_spline.................................................................................61
Configuration File Options 11
iges_in_assoc_dim_geom_21 ..........................................................................61
iges_in_dwg_color ............................................................................................61
iges_in_dwg_line_font ......................................................................................62
iges_in_dwg_view .............................................................................................62
iges_in_group_to_dwg_layer ...........................................................................62
iges_note_disp...................................................................................................62
iges_out_all_srfs_as .........................................................................................62
iges_out_assembly_default_mode ..................................................................62
iges_out_catia_gdt_width.................................................................................63
iges_out_catia_notes ........................................................................................63
iges_out_dwg_color..........................................................................................63
iges_out_dwg_line_font....................................................................................63
iges_out_dwg_pnt_ent......................................................................................63
iges_out_ent_as_bspline..................................................................................63
iges_out_jamais_compliant..............................................................................63
iges_out_mil_d_28000.......................................................................................64
iges_out_spl_crvs_as_126 ...............................................................................64
iges_out_spl_srfs_as_128 ................................................................................64
iges_out_start_note...........................................................................................64
iges_out_symbol_entity....................................................................................64
iges_out_trim_curve_deviation........................................................................64
iges_out_trim_xyz .............................................................................................64
iges_out_trm_srfs_as_143................................................................................65
iges_zero_view_disp.........................................................................................65
ignore_all_ref_scope_settings.........................................................................65
12 Configuration File Options
info_output_mode .............................................................................................65
initial_bend_y_factor.........................................................................................65
instance_search_exhaustive............................................................................65
interface_quality ................................................................................................66
intf2d_fit_incompatible_data............................................................................66
intf2d_out_enhanced_ents ...............................................................................66
intf_catia_version ..............................................................................................66
intf_in_arclength_reparam................................................................................66
intf_in_blanked_entities....................................................................................67
intf_in_layer_asm_dialog..................................................................................67
intf_in_treat_polyline_as...................................................................................67
intf_out_assign_names.....................................................................................67
intf_out_asm_mapped_item .............................................................................68
intf_out_as_bezier .............................................................................................68
intf_out_auto_layer_ids ....................................................................................68
intf_out_blanked_entities .................................................................................68
intf_out_layer_rename_table............................................................................68
intf_out_max_bspl_degree ...............................................................................68
intf_out_text_length ..........................................................................................68
intf_pdgs_version..............................................................................................69
intf3d_in_close_open_boundaries...................................................................69
intf3d_in_include_items....................................................................................69
intf3d_in_profiles...............................................................................................69
intf3d_out_datums_by_default.........................................................................70
intf3d_out_default_option.................................................................................70
Configuration File Options 13
intf3d_out_extend_surface...............................................................................70
intf3d_out_force_surf_normals........................................................................70
intf3d_out_surface_deviation...........................................................................70
intf3d_out_default_option.................................................................................71
kbd_cmd_abbreviation......................................................................................71
kbd_selection.....................................................................................................71
keep_info_datums .............................................................................................71
lang_propagate..................................................................................................71
layer_intchg_funct.............................................................................................71
layer_intchg_simp .............................................................................................71
lods_value ..........................................................................................................72
let_proe_rename_pdm_objects........................................................................72
linear_tol_0.0......................................................................................................72
linear_tol.............................................................................................................72
lods_enabled......................................................................................................72
maintain_limit_tol_nominal ..............................................................................73
make_parameters_from_fmt_tables ................................................................73
make_proj_view_notes .....................................................................................73
mapkey ...............................................................................................................73
mark_approximate_dims ..................................................................................73
max_animation_time .........................................................................................73
maximum_texture_size .....................................................................................73
mdl_tree_cfg_file ...............................................................................................74
measure_sig_figures.........................................................................................74
mentor_ver_2_0 .................................................................................................74
14 Configuration File Options
menu_activate_on_press..................................................................................74
menu_font ..........................................................................................................74
menu_horizontal_hint .......................................................................................74
menu_show_instances .....................................................................................75
menu_translation...............................................................................................75
merge_smt_srfs_without_seam.......................................................................75
mesh_spline_surf ..............................................................................................75
mfg_auto_ref_prt_as_chk_srf ..........................................................................75
mfg_customize_dialog......................................................................................75
mfg_ijk_num_digits...........................................................................................76
mfg_info_location..............................................................................................76
mfg_modal_command_file ...............................................................................76
mfg_param_mode..............................................................................................76
mfg_xyz_num_digits .........................................................................................76
min_animation_steps........................................................................................76
model_allow_ref_scope_change......................................................................76
model_grid_neg_prefix .....................................................................................76
model_grid_num_dig ........................................................................................77
model_grid_spacing..........................................................................................77
model_notes_as_labels ....................................................................................77
model_note_display ..........................................................................................77
model_rename_template...................................................................................77
model_tree_start................................................................................................77
msg_translation.................................................................................................77
native_kbd_macros ...........................................................................................78
Configuration File Options 15
ncl_file_extension..............................................................................................78
new_asm_regen_revnums................................................................................78
new_relation_ui..................................................................................................78
new_parameter_ui .............................................................................................78
nt_cache_dirs.....................................................................................................78
number_user_colors .........................................................................................78
number_wireframe_colors................................................................................79
orientation ..........................................................................................................79
orthogonal_snap................................................................................................79
overlays_enabled...............................................................................................79
override_store_back..........................................................................................80
package_constraints.........................................................................................80
parenthesize_ref_dim........................................................................................80
pen1_line_weight...............................................................................................80
pen_slew.............................................................................................................81
pen_slew_xy.......................................................................................................81
pen_table_file.....................................................................................................81
photorender_default_height.............................................................................81
photorender_default_width ..............................................................................81
photorender_preview_scale .............................................................................81
pick_aperture_radius ........................................................................................81
pick_chain_tangent_only..................................................................................82
pipe_3D_bend_theor_int_pts ...........................................................................82
pipe_update_pre_20_int_pts ............................................................................82
plotter..................................................................................................................82
16 Configuration File Options
plotter_command...............................................................................................82
plotter_handshake.............................................................................................82
plot_file_dir ........................................................................................................83
plot_linestyle_scale...........................................................................................83
plot_names.........................................................................................................83
plot_to_scale_full_window ...............................................................................83
popuphelp_font..................................................................................................83
postscript_compression...................................................................................84
prehighlight ........................................................................................................84
prodevdat ...........................................................................................................84
pro_mf_clamp_dir..............................................................................................84
pro_unit_sys ......................................................................................................84
profile_output_utils ...........................................................................................84
prompt_on_erase_not_disp..............................................................................85
prompt_on_exit..................................................................................................85
propagate_change_to_parents ........................................................................85
prorembatch_queue_manager .........................................................................85
protable_in_background...................................................................................85
provide_pick_message_always .......................................................................86
pro_ansys_path .................................................................................................86
pro_colormap_path ...........................................................................................86
pro_cosmos_path..............................................................................................86
pro_crosshatch_dir ...........................................................................................86
pro_dtl_setup_dir ..............................................................................................86
pro_editor_command........................................................................................86
Configuration File Options 17
pro_format_dir ...................................................................................................87
pro_group_dir ....................................................................................................87
pro_library_dir ...................................................................................................87
pro_material_dir.................................................................................................87
pro_mdb_dir.......................................................................................................87
pro_mfg_cmdsyn_dir ........................................................................................87
pro_mf_cl_dir.....................................................................................................88
pro_mf_param_dir .............................................................................................88
pro_mf_tprm_dir................................................................................................88
pro_mf_workcell_dir..........................................................................................88
pro_nastran_conv..............................................................................................88
pro_nastran_path ..............................................................................................88
pro_note_dir.......................................................................................................88
pro_plot_config_dir...........................................................................................88
pro_sheet_met_dir.............................................................................................89
pro_solver_name...............................................................................................89
pro_solver_path.................................................................................................89
pro_spool_dir.....................................................................................................89
pro_surface_finish_dir......................................................................................89
pro_symbol_dir..................................................................................................89
pro_texture_library............................................................................................90
pro_unit_length..................................................................................................90
pro_unit_mass ...................................................................................................90
ps_output_with_pagesize.................................................................................90
punch_axis_points ............................................................................................90
18 Configuration File Options
put_iges_drawing_entity...................................................................................90
query_bin_start..................................................................................................90
raster_plot_dpi...................................................................................................91
read_famtab_file_on_retrieve...........................................................................91
read_vda_in_pset_as_spline............................................................................91
recompute_iges_dim_value..............................................................................91
regen_backup_directory...................................................................................91
regen_backup_using_disk................................................................................91
relation_file_editor.............................................................................................91
remember_last_get_point_option....................................................................92
rename_drawings_with_object ........................................................................92
reserved_menu_space......................................................................................92
repeat_datum_create.........................................................................................92
restricted_gtol_dialog .......................................................................................92
retain_display_memory.....................................................................................92
rotate_postscript_print .....................................................................................93
save_bitmap.......................................................................................................93
save_drawing_picture_file................................................................................93
save_display ......................................................................................................93
save_instance_accelerator...............................................................................93
save_model_display..........................................................................................94
save_modified_draw_models_only .................................................................94
save_objects ......................................................................................................94
save_object_in_current.....................................................................................94
save_triangles_flag ...........................................................................................94
Configuration File Options 19
save_unchanged_pdm_object .........................................................................95
scope_invalid_refs ............................................................................................95
search_path........................................................................................................95
search_path_file ................................................................................................96
section_color .....................................................................................................96
selection_of_removed_entities ........................................................................96
select_on_dtm_edges .......................................................................................96
sel_insts_on_comp_retrieval ...........................................................................96
set_menu_width.................................................................................................97
Set_trail_single_step.........................................................................................97
set_model_types_to_save ................................................................................97
set_zero_curvature_color.................................................................................97
shaded_postscript_background ......................................................................97
ship_name..........................................................................................................97
ship_compt_spec_file .......................................................................................97
ship_frame_prefix..............................................................................................98
ship_frame_landing_prefix...............................................................................98
ship_long_bulkhead_prefix ..............................................................................98
ship_trans_bulkhead_prefix.............................................................................98
ship_deck_prefix ...............................................................................................98
ship_coaming_prefix.........................................................................................98
ship_butt_prefix.................................................................................................98
ship_seam_prefix ..............................................................................................98
shade_moving_comp........................................................................................98
shade_mfg_ref_models.....................................................................................99
20 Configuration File Options
shade_surface_feat ...........................................................................................99
shade_windows .................................................................................................99
shade_with .........................................................................................................99
show_axes_for_extr_arcs.................................................................................99
show_cav_fit_loc_sys.......................................................................................99
show_dim_sign..................................................................................................99
show_geom_checks_on_creation .................................................................100
show_refdes_colors........................................................................................100
show_shaded_edges.......................................................................................100
show_shell_elements......................................................................................100
shrinkage_value_display ................................................................................100
silhouettes........................................................................................................100
skeleton_model_default_color.......................................................................100
sketcher_animated_modify ............................................................................101
sketcher_dec_places.......................................................................................101
sketcher_disp_constraints .............................................................................101
sketcher_disp_dimensions.............................................................................101
sketcher_disp_vertices...................................................................................101
sketcher_starts_in_2d.....................................................................................101
sketcher_undo_stack_limit 200......................................................................102
smooth_lods ....................................................................................................102
spin_center_display ........................................................................................102
spin_control .....................................................................................................102
spin_rate_zoom_sensitive..............................................................................102
spin_with_part_entities...................................................................................102
Configuration File Options 21
spin_with_silhouettes .....................................................................................103
start_appmgr....................................................................................................103
start_model_dir................................................................................................103
step_appearance_layer_groups.....................................................................103
step_export_dwg_views .................................................................................103
step_export_format .........................................................................................103
store_tool_path_file.........................................................................................104
summary_help .................................................................................................104
supertab_mesh_geom.....................................................................................104
switch_dims_for_notes...................................................................................104
sym_leader_orient_move_text .......................................................................104
symbol_instance_palette_file.........................................................................104
symbol_palette_input......................................................................................104
system_colors_file ..........................................................................................105
system_background_color.............................................................................105
system_iges_header_file ................................................................................105
tablet_device_name.........................................................................................105
tangent_edge_display.....................................................................................105
tan_angle_for_disp..........................................................................................105
terminal_command..........................................................................................106
texture_search_path........................................................................................106
thermo_position_hint......................................................................................106
tiff_compression..............................................................................................106
tiff_type.............................................................................................................106
timeout_multiplier............................................................................................106
22 Configuration File Options
todays_date_note_format...............................................................................106
tolerance_class................................................................................................107
tolerance_standard..........................................................................................107
tolerance_table_dir..........................................................................................107
tol_display ........................................................................................................107
tol_mode...........................................................................................................107
toolkit_registry_file..........................................................................................107
trail_delay .........................................................................................................107
trail_dir..............................................................................................................108
train_file_path ..................................................................................................108
use_nom_dim_val_in_exp ..............................................................................108
use_smt_turret_dialog ....................................................................................108
transparency ....................................................................................................108
tutor_enabled...................................................................................................108
update_pre_130_harness................................................................................108
update_pre_16_cable_layers..........................................................................108
user_iges_header_file.....................................................................................109
use_8_plotter_pens.........................................................................................109
use_cadam_plot_data .....................................................................................109
use_iges_font_1003.........................................................................................109
use_iges_kanji_font_2001 ..............................................................................109
use_major_units ..............................................................................................110
use_shrunk_state_in_mem.............................................................................110
use_software_linefonts...................................................................................110
use_temp_dir_for_inst ....................................................................................110
Configuration File Options 23
variable_plots_in_inches................................................................................110
variant_drawing_item_sizes...........................................................................110
vda_header.......................................................................................................111
versatec_cutter_installed................................................................................111
visible_mapkeys ..............................................................................................111
visible_message_lines....................................................................................111
vrml_anchor_url...............................................................................................111
vrml_background_color..................................................................................111
vrml_explode_lines .........................................................................................111
vrml_export ......................................................................................................112
vrml_export_resolution...................................................................................112
vrml_file_duplicate_material ..........................................................................112
vrml_multiple_vie |
发表于 2003-1-2 13:10:46
