Pro/E Wildfire4.0 F000已正式发布了

做个种子吧。。。。大家都想要呢

支持，做個種子，大家用BT下載！頂啊！

也支持!!

用上了,爽

原帖由 xiamen_guo 于 2008-1-29 08:59 发表
一定要买过4.0的用户才行吗？
我们是3.0的用户

正版用户只要是在维护期内，就可以向PTC提交license升级服务到支持4.0

4.0的lic版本是29.0的，wildfire3.0的lic版本在28.0必须升级后才支持。

支持楼上的朋友做种,新的许可,ZWT已经放出来了,没见到安装程序,郁闷!
1. Open "license.dat" in any text editor and change all strings "YOUR_HOST_ID" for your computer real Host_ID (your Network Card MAC-adress) and save

2. If your want to run  ProE Wildfire 4.0 F000 (and higher) go to  6.

3. If your want to use this "license.dat" for ProE Wildfire 4.0 C000 (PreProduction) change all strings "ptc_d 29.0" in "license.dat" for "ptc_d 28.0", save and go to 6.

4. If your want to use this "license.dat" for ProE Wildfire 3.0 (any build) change all strings "ptc_d 29.0" in "license.dat" for "ptc_d 27.0", save and go to 6.

5. Install ProE WF4 F000 or  ProE WF4 C000 (PreProduction) or ProE WF3 (any build)) and/or  ProE Mechanica (any build) using "license.dat" as "Nodelocked License File. (No Server running)"

6. Run ProE_WF3_Mxxx_WF4_crk.exe

7. Wait for system messages
    "Pro/ENGINEER 3: successsfully patched!"
    "Pro/Mechanica 3: successsfully patched!"

8. Click OK
That's all..

P.S. If you did not install Pro/Mechanica  you will get a message
   "Pro/Mechanica 3: product not installed or files not found!"
Click OK

Cracked by gellmaR

关注中。。。。。

看看............