cim it12有二次殘料中加工嗎

lugj wrote:  
如果用多一点边界的话，抬刀会少一点！  
但我还是想问MIN STOCK WIDTH =5 和MIN STOCK WIDTH =0.8  
有什么区别吗？  
MIN STOCK WIDTH 的实际意义是什么呢？  
--------------------------------------------------------------------
  
MIN.STOK.WIDTH =The minimum Z distance of remaining stock for which tool motions will be generated.  
Example: If remaining stock at a certain point is 0.1 mm, and the tool diameter is 25 mm, tool motions here are not necessary. A minimum stock width can be specified to avoid creating these unnecessary tool motions.

MIN STOCK WIDTH :是指刀具在铣削时切入毛坯的最少量. 当剩余毛坯小于所设参数时,则不加工此处.Cimatron公司在开发这个功能的目的正如上面英文所说:当上次加工的局部留量很小时,是没有必要进行再次加工的.

up

　　用大刀开粗后,再用较小刀具产生粗加工路径,然后使用优化中的移除空切.我感觉还是有一些效率.