|
马上注册,结交更多同行朋友,交流,分享,学习。
您需要 登录 才可以下载或查看,没有帐号?注册
x
我在做毕业设计,中间出了问题,现在卡住了不能进行,拜托高手指点,十分感谢。
我的设计是四轮转向,使用ADAMS2003,模型很简单,只画出前后悬架、转向杆、底盘、轮胎和路普。
前面进行的很顺利,在添加轮胎时弹出警告如下:
WARNING: Model .model_1 is no longer compatible with the ADAMS/Solver (C++).
.model_1.TIRE_1 is causing the incompatibility because:
1) Objects of type Tire are not compatible with the
ADAMS/Solver (C++).
2) The topology of the model has changed so .model_1.TIRE_1
is no longer connected in a way that is compatible with the
ADAMS/Solver (C++).
3) An attribute of .model_1.TIRE_1 is no longer compatible with
the ADAMS/Solver (C++).
If you intend to use the ADAMS/Solver (C++), then be sure that you
set your preferences so ADAMS/Solver (C++) is the default as follows:
- From the Settings menu, point to Solver and select either
Solver Executable or Preferences, depending on the product
you are using.
- Press F1 in the dialog box that appears to learn more.
If you do not want to use the ADAMS/Solver (C++), you must change
your model to eliminate the incompatibilty. See the online help
for the object listed for more information.
参数完全是李军UA轮胎参数,请问最后仿真失败和这有关么?轮胎文件应该放在哪个文件夹?求高手指点,谢谢。 |
|