请教一些LISP命令的运用

只看该作者 · 发表于 2011-10-17 22:32:10

有3个LISP命令。会LISP的请看。属于快捷命令。我想知道如何运用的，感谢高手们、感谢版主们的解答！！或发我邮箱zengzheng1987@126.com

只看该作者 · 发表于 2011-10-18 23:39:49

自己懂了你们也可以加载进去啊！！

只看该作者 · 发表于 2011-10-18 23:47:38

(DEFUN C:HZFILE(/ TXT SP TH INS WD STL LS DT)
(setvar "BLIPMODE" 0)
(SETVAR "CMDECHO" 0)
(modes '("BLIPMODE" "CMDECHO"))
(graphscr)
(SETQ TXT (OPEN (GETSTRING "\n Name of Text File(WordStar): ") "r"))
(SETQ SP (GETPOINT "\n Text String Start Point :"))
(SETQ INS (GETSTRING"\n Enter Line Spacing in Drawing Units :"))
(SETQ HT (GETSTRING "\n Enter Text Height in Drawing Units :"))
(SETQ WD (GETSTRING "\n Enter Text Width Factor :"))
(princ "Please select HZ style:")
(initget 2 "Singleline-hz Doubleline-hz")
(setq hz (getstring "\nSingleline-hz/Doubleline-hz/<standard-hz>:"))
(setq pname (getvar "dwgprefix"))
(cond ((eq hz "s")  (COMMAND "STYLE" "HZ" "txt,hztxt" HT WD "" "" ""))
   ((eq hz "d")  (COMMAND "STYLE" "HZ1" "txt,hztxt1" HT WD "" "" ""))
   ((eq hz "") (COMMAND "STYLE" "HZ0" "txt,hztxt0" HT WD "" "" ""))
   (T (princ "Unknown HZ style ! Restart HZFILE COMMAND."))
   )

(SETQ DT (READ-LINE TXT))
(SETQ LS (STRCAT "@"INS"<-90"))
(COMMAND"TEXT" SP "" DT)
(WHILE (/= DT NIL)
(SETQ DT (READ-LINE TXT))
(COMMAND"TEXT" LS "" DT)
)
(COMMAND"REDRAW")
)

只看该作者 · 发表于 2011-10-18 23:49:00

(defun C:CTEXT ()
(setvar "BLIPMODE" 0)
(setvar "CMDECHO" 0)
(modes '("BLIPMODE" "CMDECHO"))
(graphscr)
(princ "Please select HZ style:")
(initget 2 "Singleline-hz Doubleline-hz")
(setq hz (getstring "\nSingleline-hz/Doubleline-hz/<standard-hz>:"))
(cond ((eq hz "s")  (COMMAND "STYLE" "HZ" "TXT,HZTXT" "" "0.75" "" "" ""))
      ((eq hz "d")  (COMMAND "STYLE" "HZ1" "TXT,HZTXT1" "" "0.75" "" "" ""))
      ((eq hz "") (COMMAND "STYLE" "HZ0" "TXT,HZTXT0" "" "0.75" "" "" ""))
      (T (princ "Unknown HZ style !"))
      )
(setq cst (getvar "textstyle"))
(if (= interface nul) (setq interface "P"))
(if (or (= interface "W") (= interface "w"))
      (princ "\nCurrent Interface is WBX")
      (princ "\nCurrent Interface is Py.")
)
(setq olderr *error*
      *error* myerror)
(modes '("BLIPMODE" "CMDECHO"))
(graphscr)
(initget 1 "Center Fit Middle Right Interface")
(setq pt (getpoint "\n<Start point or Center>/Fit/Middle/Right/Interface :"))
(if (/= (type pt) 'LIST)
   (if (= pt "Interface")
      (progn
            (initget  "Wbx Py")
            (setq interfaces (getkword  "\n Wbx or Py :"))
            (setq interface (substr interfaces 1 1))
            (setq pt (getpoint "\n<Start point or Center>/Fit/Middle/Right:"))
         )
   )
)
(if (/= (type pt) 'LIST)
   (setq j (substr pt 1 1))
   (setq j "L")
)

(if (/= (type pt) 'LIST)
   (if (= pt "Fit")
         (progn
            (initget 1)
            (setq ptf (getpoint "Fist text line point: "))
            (setq pt ptf)
            (initget 1)
            (setq pts (getpoint "Second text line point: "))
            (setq k 1)
         )
         (progn
            (initget 1)
            (setq pt (getpoint (strcat "\n" pt " point: ")))
         )
   )
  )
  (initget 6)
  (setq h (getdist pt (strcat "\nHeight <"
                           (rtos (getvar "TEXTSIZE"))
                              ">: "
                  )
      )
)
(if (null h) (setq h (getvar "textsize")))
(if (/= k 1)
(progn
   (if (null a$$)
      (progn
         (if (= (cdr (assoc 70 ts)) 4) ;Vertical style text
            (progn
               (setq a$$ 270)
               (PROMPT "\nRotational angle <270>: ")
            )
            (progn
               (setq a$$ 0)
               (PROMPT "\nRotational angle <0>: ")
            )
         )
      )
      (progn
         (PROMPT "\nRotational angle <")
         (princ (strcat (angtos a$$) ">: "))
      )
   )
   (setq ang (getangle pt))
   (if (null ang) (setq ang a$$))
   (setq a$$ ang)
)
)
  (if (or (= interface "P") (= interface "p")) (COMMAND "AVCAD")(COMMAND "AVCAD W"))
  (setq f (open "chstr.dat" "r"))
  (setq eoff 1)
  (setq st (read-line f))
  (cond ((and (= j "L") h)
         (while (= eoff 1)
            (COMMAND "TEXT" "s" cst pt h (rtd ang) st)
            (setq OLDx (car pt))
            (setq oldy (cadr pt))
            (setq newX (+ oldX (* (sin ANG) H (/ 1. 0.6))))
            (setq newy (- oldy (* (cos ANG) H (/ 1. 0.6))))
            (setq pt (list NEWX NEWY))
            (setq st (read-line f))
            (if (= st nil)(setq eoff 2))
         )
      )
      ((and (/= j "L") (/= j "F") h)
      (COMMAND "TEXT" "s" cst j pt h (rtd ang) st)
      )
      ((and (/= j "L") (= j "F") h)
      (COMMAND "TEXT" "s" cst j ptf pts h st)
      )
   )
(moder)
(setq *error* olderr)
(close f)
(COMMAND "text" "s" cst ^c)
(redraw)
(princ)
)

(defun C:EPT (/ olds oldss olds1 stp h txt wf st x0 y0 l n yes
            TXTA TXT1 NN AR AD CL cst)
(setq olderr *error*
      *error* myerror)
(setvar "BLIPMODE" 0)
(setvar "CMDECHO" 0)
(SETQ CL (GETVAR "CLAYER"))
(setq cst (getvar "textstyle"))
(setq olds (entsel "\nSelect the string :"))
(SETQ OLDSS (CAR OLDS))
(setq olds (entget  (car  olds)))
(setq olds1 (cdr (assoc 0 olds)))
(if (= "TEXT" oldS1)
   ( progn
      (COMMAND "ERASE" (SSADD OLDSS) "")
      (COMMAND "LAYER" "S"  (CDR (ASSOC 8 OLDS)) "")
      (setq stp  (trans (cdr (assoc 10 olds)) 0 1))
      (setq h (cdr (assoc 40 olds)))
      (setq aR (cdr (assoc 50 olds)))
      (setq aD  (RTD (cdr (assoc 50 olds))))
      (setq txt (cdr (assoc 1 olds)))
      (setq wf (Cdr (assoc 41 olds)))
      (SETQ ST (CDR (ASSOC 7 OLDS)))
      (SETQ X0 (CAR STP) Y0 (CADR STP))
      (setq l (strlen txt))
      (setq n 1) (setq nn 2)
      (setq yes 1)
      (while (<= N L)
               (setq tXT1 (substr txt n 2))
               (SETQ TXTA (ASCII TXT1))
               (setq nn (cond
                        ((= TXT1 "%%") 3)
                        ((> Txta 160) 2)
                        ((< Txta 129) 1)
                        )
               )
               (setq txt1 (substr txt n nn))
               (setq n (+ n nn))
               (COMMAND "text" "S" ST stp h aD txt1)

               (IF (= NN 2)
                  (PROGN
                     (cond ((eq cst "HZ") (setq wscale 1.0625))
                           ((eq cst "HZ1")  (setq wscale 1.20))
                           ((eq cst "HZ0")  (setq wscale 1.40))
                           )
                     (SETQ X0 (+ X0 (* (cos aR)  H WF wscale)))
                     (SETQ y0 (+ Y0 (* (sin aR)  H WF wscale)))
                  )
                  (PROGN
                     (SETQ JF (COND
                                 ((= TXTA 49) 0.65)
                                 ((= TXTA 46) 0.3)
                                 (T 1)
                              )
                        )
                     (setq wf1 (* JF WF))
                     (SETQ X0 (+ X0 (* (cos aR)  H WF1)))
                     (SETQ y0 (+ Y0 (* (sin aR)  H WF1)))
                  )
               )
               (SETQ STP (LIST X0 Y0))

      )
   )
  )
(COMMAND "LAYER" "S" CL "")
  (COMMAND "text" "s" cst ^c)
(setq *error* olderr)
(princ)
)

只看该作者 · 发表于 2011-10-18 23:49:18

(defun C:CTEXT ()
(setvar "BLIPMODE" 0)
(setvar "CMDECHO" 0)
(modes '("BLIPMODE" "CMDECHO"))
(graphscr)
(princ "Please select HZ style:")
(initget 2 "Singleline-hz Doubleline-hz")
(setq hz (getstring "\nSingleline-hz/Doubleline-hz/<standard-hz>:"))
(cond ((eq hz "s")  (COMMAND "STYLE" "HZ" "TXT,HZTXT" "" "0.75" "" "" ""))
      ((eq hz "d")  (COMMAND "STYLE" "HZ1" "TXT,HZTXT1" "" "0.75" "" "" ""))
      ((eq hz "") (COMMAND "STYLE" "HZ0" "TXT,HZTXT0" "" "0.75" "" "" ""))
      (T (princ "Unknown HZ style !"))
      )
(setq cst (getvar "textstyle"))
(if (= interface nul) (setq interface "P"))
(if (or (= interface "W") (= interface "w"))
      (princ "\nCurrent Interface is WBX")
      (princ "\nCurrent Interface is Py.")
)
(setq olderr *error*
      *error* myerror)
(modes '("BLIPMODE" "CMDECHO"))
(graphscr)
(initget 1 "Center Fit Middle Right Interface")
(setq pt (getpoint "\n<Start point or Center>/Fit/Middle/Right/Interface :"))
(if (/= (type pt) 'LIST)
   (if (= pt "Interface")
      (progn
            (initget  "Wbx Py")
            (setq interfaces (getkword  "\n Wbx or Py :"))
            (setq interface (substr interfaces 1 1))
            (setq pt (getpoint "\n<Start point or Center>/Fit/Middle/Right:"))
         )
   )
)
(if (/= (type pt) 'LIST)
   (setq j (substr pt 1 1))
   (setq j "L")
)

(if (/= (type pt) 'LIST)
   (if (= pt "Fit")
         (progn
            (initget 1)
            (setq ptf (getpoint "Fist text line point: "))
            (setq pt ptf)
            (initget 1)
            (setq pts (getpoint "Second text line point: "))
            (setq k 1)
         )
         (progn
            (initget 1)
            (setq pt (getpoint (strcat "\n" pt " point: ")))
         )
   )
  )
  (initget 6)
  (setq h (getdist pt (strcat "\nHeight <"
                           (rtos (getvar "TEXTSIZE"))
                              ">: "
                  )
      )
)
(if (null h) (setq h (getvar "textsize")))
(if (/= k 1)
(progn
   (if (null a$$)
      (progn
         (if (= (cdr (assoc 70 ts)) 4) ;Vertical style text
            (progn
               (setq a$$ 270)
               (PROMPT "\nRotational angle <270>: ")
            )
            (progn
               (setq a$$ 0)
               (PROMPT "\nRotational angle <0>: ")
            )
         )
      )
      (progn
         (PROMPT "\nRotational angle <")
         (princ (strcat (angtos a$$) ">: "))
      )
   )
   (setq ang (getangle pt))
   (if (null ang) (setq ang a$$))
   (setq a$$ ang)
)
)
  (if (or (= interface "P") (= interface "p")) (COMMAND "AVCAD")(COMMAND "AVCAD W"))
  (setq f (open "chstr.dat" "r"))
  (setq eoff 1)
  (setq st (read-line f))
  (cond ((and (= j "L") h)
         (while (= eoff 1)
            (COMMAND "TEXT" "s" cst pt h (rtd ang) st)
            (setq OLDx (car pt))
            (setq oldy (cadr pt))
            (setq newX (+ oldX (* (sin ANG) H (/ 1. 0.6))))
            (setq newy (- oldy (* (cos ANG) H (/ 1. 0.6))))
            (setq pt (list NEWX NEWY))
            (setq st (read-line f))
            (if (= st nil)(setq eoff 2))
         )
      )
      ((and (/= j "L") (/= j "F") h)
      (COMMAND "TEXT" "s" cst j pt h (rtd ang) st)
      )
      ((and (/= j "L") (= j "F") h)
      (COMMAND "TEXT" "s" cst j ptf pts h st)
      )
   )
(moder)
(setq *error* olderr)
(close f)
(COMMAND "text" "s" cst ^c)
(redraw)
(princ)
)

(defun C:EPT (/ olds oldss olds1 stp h txt wf st x0 y0 l n yes
            TXTA TXT1 NN AR AD CL cst)
(setq olderr *error*
      *error* myerror)
(setvar "BLIPMODE" 0)
(setvar "CMDECHO" 0)
(SETQ CL (GETVAR "CLAYER"))
(setq cst (getvar "textstyle"))
(setq olds (entsel "\nSelect the string :"))
(SETQ OLDSS (CAR OLDS))
(setq olds (entget  (car  olds)))
(setq olds1 (cdr (assoc 0 olds)))
(if (= "TEXT" oldS1)
   ( progn
      (COMMAND "ERASE" (SSADD OLDSS) "")
      (COMMAND "LAYER" "S"  (CDR (ASSOC 8 OLDS)) "")
      (setq stp  (trans (cdr (assoc 10 olds)) 0 1))
      (setq h (cdr (assoc 40 olds)))
      (setq aR (cdr (assoc 50 olds)))
      (setq aD  (RTD (cdr (assoc 50 olds))))
      (setq txt (cdr (assoc 1 olds)))
      (setq wf (Cdr (assoc 41 olds)))
      (SETQ ST (CDR (ASSOC 7 OLDS)))
      (SETQ X0 (CAR STP) Y0 (CADR STP))
      (setq l (strlen txt))
      (setq n 1) (setq nn 2)
      (setq yes 1)
      (while (<= N L)
               (setq tXT1 (substr txt n 2))
               (SETQ TXTA (ASCII TXT1))
               (setq nn (cond
                        ((= TXT1 "%%") 3)
                        ((> Txta 160) 2)
                        ((< Txta 129) 1)
                        )
               )
               (setq txt1 (substr txt n nn))
               (setq n (+ n nn))
               (COMMAND "text" "S" ST stp h aD txt1)

               (IF (= NN 2)
                  (PROGN
                     (cond ((eq cst "HZ") (setq wscale 1.0625))
                           ((eq cst "HZ1")  (setq wscale 1.20))
                           ((eq cst "HZ0")  (setq wscale 1.40))
                           )
                     (SETQ X0 (+ X0 (* (cos aR)  H WF wscale)))
                     (SETQ y0 (+ Y0 (* (sin aR)  H WF wscale)))
                  )
                  (PROGN
                     (SETQ JF (COND
                                 ((= TXTA 49) 0.65)
                                 ((= TXTA 46) 0.3)
                                 (T 1)
                              )
                        )
                     (setq wf1 (* JF WF))
                     (SETQ X0 (+ X0 (* (cos aR)  H WF1)))
                     (SETQ y0 (+ Y0 (* (sin aR)  H WF1)))
                  )
               )
               (SETQ STP (LIST X0 Y0))

      )
   )
  )
(COMMAND "LAYER" "S" CL "")
  (COMMAND "text" "s" cst ^c)
(setq *error* olderr)
(princ)
)

只看该作者 · 发表于 2011-10-18 23:54:40

(defun C:CTEXT ()
(setvar "BLIPMODE" 0)
(setvar "CMDECHO" 0)
(modes '("BLIPMODE" "CMDECHO"))
(graphscr)
(princ "Please select HZ style:")
(initget 2 "Singleline-hz Doubleline-hz")
(setq hz (getstring "\nSingleline-hz/Doubleline-hz/<standard-hz>:"))
(cond ((eq hz "s")  (COMMAND "STYLE" "HZ" "TXT,HZTXT" "" "0.75" "" "" ""))
      ((eq hz "d")  (COMMAND "STYLE" "HZ1" "TXT,HZTXT1" "" "0.75" "" "" ""))
      ((eq hz "") (COMMAND "STYLE" "HZ0" "TXT,HZTXT0" "" "0.75" "" "" ""))
      (T (princ "Unknown HZ style !"))
      )
(setq cst (getvar "textstyle"))
(if (= interface nul) (setq interface "P"))
(if (or (= interface "W") (= interface "w"))
      (princ "\nCurrent Interface is WBX")
      (princ "\nCurrent Interface is Py.")
)
(setq olderr *error*
      *error* myerror)
(modes '("BLIPMODE" "CMDECHO"))
(graphscr)
(initget 1 "Center Fit Middle Right Interface")
(setq pt (getpoint "\n<Start point or Center>/Fit/Middle/Right/Interface :"))
(if (/= (type pt) 'LIST)
   (if (= pt "Interface")
      (progn
            (initget  "Wbx Py")
            (setq interfaces (getkword  "\n Wbx or Py :"))
            (setq interface (substr interfaces 1 1))
            (setq pt (getpoint "\n<Start point or Center>/Fit/Middle/Right:"))
         )
   )
)
(if (/= (type pt) 'LIST)
   (setq j (substr pt 1 1))
   (setq j "L")
)

(if (/= (type pt) 'LIST)
   (if (= pt "Fit")
         (progn
            (initget 1)
            (setq ptf (getpoint "Fist text line point: "))
            (setq pt ptf)
            (initget 1)
            (setq pts (getpoint "Second text line point: "))
            (setq k 1)
         )
         (progn
            (initget 1)
            (setq pt (getpoint (strcat "\n" pt " point: ")))
         )
   )
  )
  (initget 6)
  (setq h (getdist pt (strcat "\nHeight <"
                           (rtos (getvar "TEXTSIZE"))
                              ">: "
                  )
      )
)
(if (null h) (setq h (getvar "textsize")))
(if (/= k 1)
(progn
   (if (null a$$)
      (progn
         (if (= (cdr (assoc 70 ts)) 4) ;Vertical style text
            (progn
               (setq a$$ 270)
               (PROMPT "\nRotational angle <270>: ")
            )
            (progn
               (setq a$$ 0)
               (PROMPT "\nRotational angle <0>: ")
            )
         )
      )
      (progn
         (PROMPT "\nRotational angle <")
         (princ (strcat (angtos a$$) ">: "))
      )
   )
   (setq ang (getangle pt))
   (if (null ang) (setq ang a$$))
   (setq a$$ ang)
)
)
  (if (or (= interface "P") (= interface "p")) (COMMAND "AVCAD")(COMMAND "AVCAD W"))
  (setq f (open "chstr.dat" "r"))
  (setq eoff 1)
  (setq st (read-line f))
  (cond ((and (= j "L") h)
         (while (= eoff 1)
            (COMMAND "TEXT" "s" cst pt h (rtd ang) st)
            (setq OLDx (car pt))
            (setq oldy (cadr pt))
            (setq newX (+ oldX (* (sin ANG) H (/ 1. 0.6))))
            (setq newy (- oldy (* (cos ANG) H (/ 1. 0.6))))
            (setq pt (list NEWX NEWY))
            (setq st (read-line f))
            (if (= st nil)(setq eoff 2))
         )
      )
      ((and (/= j "L") (/= j "F") h)
      (COMMAND "TEXT" "s" cst j pt h (rtd ang) st)
      )
      ((and (/= j "L") (= j "F") h)
      (COMMAND "TEXT" "s" cst j ptf pts h st)
      )
   )
(moder)
(setq *error* olderr)
(close f)
(COMMAND "text" "s" cst ^c)
(redraw)
(princ)
)

只看该作者 · 发表于 2011-10-18 23:55:42

(defun C:EPT (/ olds oldss olds1 stp h txt wf st x0 y0 l n yes
            TXTA TXT1 NN AR AD CL cst)
(setq olderr *error*
      *error* myerror)
(setvar "BLIPMODE" 0)
(setvar "CMDECHO" 0)
(SETQ CL (GETVAR "CLAYER"))
(setq cst (getvar "textstyle"))
(setq olds (entsel "\nSelect the string :"))
(SETQ OLDSS (CAR OLDS))
(setq olds (entget  (car  olds)))
(setq olds1 (cdr (assoc 0 olds)))
(if (= "TEXT" oldS1)
   ( progn
      (COMMAND "ERASE" (SSADD OLDSS) "")
      (COMMAND "LAYER" "S"  (CDR (ASSOC 8 OLDS)) "")
      (setq stp  (trans (cdr (assoc 10 olds)) 0 1))
      (setq h (cdr (assoc 40 olds)))
      (setq aR (cdr (assoc 50 olds)))
      (setq aD  (RTD (cdr (assoc 50 olds))))
      (setq txt (cdr (assoc 1 olds)))
      (setq wf (Cdr (assoc 41 olds)))
      (SETQ ST (CDR (ASSOC 7 OLDS)))
      (SETQ X0 (CAR STP) Y0 (CADR STP))
      (setq l (strlen txt))
      (setq n 1) (setq nn 2)
      (setq yes 1)
      (while (<= N L)
               (setq tXT1 (substr txt n 2))
               (SETQ TXTA (ASCII TXT1))
               (setq nn (cond
                        ((= TXT1 "%%") 3)
                        ((> Txta 160) 2)
                        ((< Txta 129) 1)
                        )
               )
               (setq txt1 (substr txt n nn))
               (setq n (+ n nn))
               (COMMAND "text" "S" ST stp h aD txt1)

               (IF (= NN 2)
                  (PROGN
                     (cond ((eq cst "HZ") (setq wscale 1.0625))
                           ((eq cst "HZ1")  (setq wscale 1.20))
                           ((eq cst "HZ0")  (setq wscale 1.40))
                           )
                     (SETQ X0 (+ X0 (* (cos aR)  H WF wscale)))
                     (SETQ y0 (+ Y0 (* (sin aR)  H WF wscale)))
                  )
                  (PROGN
                     (SETQ JF (COND
                                 ((= TXTA 49) 0.65)
                                 ((= TXTA 46) 0.3)
                                 (T 1)
                              )
                        )
                     (setq wf1 (* JF WF))
                     (SETQ X0 (+ X0 (* (cos aR)  H WF1)))
                     (SETQ y0 (+ Y0 (* (sin aR)  H WF1)))
                  )
               )
               (SETQ STP (LIST X0 Y0))

      )
   )
  )
(COMMAND "LAYER" "S" CL "")
  (COMMAND "text" "s" cst ^c)
(setq *error* olderr)
(princ)
)

(DEFUN C:HZFILE(/ TXT SP TH INS WD STL LS DT)
(setvar "BLIPMODE" 0)
(SETVAR "CMDECHO" 0)
(modes '("BLIPMODE" "CMDECHO"))
(graphscr)
(SETQ TXT (OPEN (GETSTRING "\n Name of Text File(WordStar): ") "r"))
(SETQ SP (GETPOINT "\n Text String Start Point :"))
(SETQ INS (GETSTRING"\n Enter Line Spacing in Drawing Units :"))
(SETQ HT (GETSTRING "\n Enter Text Height in Drawing Units :"))
(SETQ WD (GETSTRING "\n Enter Text Width Factor :"))
(princ "Please select HZ style:")
(initget 2 "Singleline-hz Doubleline-hz")
(setq hz (getstring "\nSingleline-hz/Doubleline-hz/<standard-hz>:"))
(setq pname (getvar "dwgprefix"))
(cond ((eq hz "s")  (COMMAND "STYLE" "HZ" "txt,hztxt" HT WD "" "" ""))
   ((eq hz "d")  (COMMAND "STYLE" "HZ1" "txt,hztxt1" HT WD "" "" ""))
   ((eq hz "") (COMMAND "STYLE" "HZ0" "txt,hztxt0" HT WD "" "" ""))
   (T (princ "Unknown HZ style ! Restart HZFILE COMMAND."))
   )

(SETQ DT (READ-LINE TXT))
(SETQ LS (STRCAT "@"INS"<-90"))
(COMMAND"TEXT" SP "" DT)
(WHILE (/= DT NIL)
(SETQ DT (READ-LINE TXT))
(COMMAND"TEXT" LS "" DT)
)
(COMMAND"REDRAW")
)

只看该作者 · 发表于 2011-10-18 23:55:49

(defun C:EPT (/ olds oldss olds1 stp h txt wf st x0 y0 l n yes
            TXTA TXT1 NN AR AD CL cst)
(setq olderr *error*
      *error* myerror)
(setvar "BLIPMODE" 0)
(setvar "CMDECHO" 0)
(SETQ CL (GETVAR "CLAYER"))
(setq cst (getvar "textstyle"))
(setq olds (entsel "\nSelect the string :"))
(SETQ OLDSS (CAR OLDS))
(setq olds (entget  (car  olds)))
(setq olds1 (cdr (assoc 0 olds)))
(if (= "TEXT" oldS1)
   ( progn
      (COMMAND "ERASE" (SSADD OLDSS) "")
      (COMMAND "LAYER" "S"  (CDR (ASSOC 8 OLDS)) "")
      (setq stp  (trans (cdr (assoc 10 olds)) 0 1))
      (setq h (cdr (assoc 40 olds)))
      (setq aR (cdr (assoc 50 olds)))
      (setq aD  (RTD (cdr (assoc 50 olds))))
      (setq txt (cdr (assoc 1 olds)))
      (setq wf (Cdr (assoc 41 olds)))
      (SETQ ST (CDR (ASSOC 7 OLDS)))
      (SETQ X0 (CAR STP) Y0 (CADR STP))
      (setq l (strlen txt))
      (setq n 1) (setq nn 2)
      (setq yes 1)
      (while (<= N L)
               (setq tXT1 (substr txt n 2))
               (SETQ TXTA (ASCII TXT1))
               (setq nn (cond
                        ((= TXT1 "%%") 3)
                        ((> Txta 160) 2)
                        ((< Txta 129) 1)
                        )
               )
               (setq txt1 (substr txt n nn))
               (setq n (+ n nn))
               (COMMAND "text" "S" ST stp h aD txt1)

               (IF (= NN 2)
                  (PROGN
                     (cond ((eq cst "HZ") (setq wscale 1.0625))
                           ((eq cst "HZ1")  (setq wscale 1.20))
                           ((eq cst "HZ0")  (setq wscale 1.40))
                           )
                     (SETQ X0 (+ X0 (* (cos aR)  H WF wscale)))
                     (SETQ y0 (+ Y0 (* (sin aR)  H WF wscale)))
                  )
                  (PROGN
                     (SETQ JF (COND
                                 ((= TXTA 49) 0.65)
                                 ((= TXTA 46) 0.3)
                                 (T 1)
                              )
                        )
                     (setq wf1 (* JF WF))
                     (SETQ X0 (+ X0 (* (cos aR)  H WF1)))
                     (SETQ y0 (+ Y0 (* (sin aR)  H WF1)))
                  )
               )
               (SETQ STP (LIST X0 Y0))

      )
   )
  )
(COMMAND "LAYER" "S" CL "")
  (COMMAND "text" "s" cst ^c)
(setq *error* olderr)
(princ)
)

(DEFUN C:HZFILE(/ TXT SP TH INS WD STL LS DT)
(setvar "BLIPMODE" 0)
(SETVAR "CMDECHO" 0)
(modes '("BLIPMODE" "CMDECHO"))
(graphscr)
(SETQ TXT (OPEN (GETSTRING "\n Name of Text File(WordStar): ") "r"))
(SETQ SP (GETPOINT "\n Text String Start Point :"))
(SETQ INS (GETSTRING"\n Enter Line Spacing in Drawing Units :"))
(SETQ HT (GETSTRING "\n Enter Text Height in Drawing Units :"))
(SETQ WD (GETSTRING "\n Enter Text Width Factor :"))
(princ "Please select HZ style:")
(initget 2 "Singleline-hz Doubleline-hz")
(setq hz (getstring "\nSingleline-hz/Doubleline-hz/<standard-hz>:"))
(setq pname (getvar "dwgprefix"))
(cond ((eq hz "s")  (COMMAND "STYLE" "HZ" "txt,hztxt" HT WD "" "" ""))
   ((eq hz "d")  (COMMAND "STYLE" "HZ1" "txt,hztxt1" HT WD "" "" ""))
   ((eq hz "") (COMMAND "STYLE" "HZ0" "txt,hztxt0" HT WD "" "" ""))
   (T (princ "Unknown HZ style ! Restart HZFILE COMMAND."))
   )

(SETQ DT (READ-LINE TXT))
(SETQ LS (STRCAT "@"INS"<-90"))
(COMMAND"TEXT" SP "" DT)
(WHILE (/= DT NIL)
(SETQ DT (READ-LINE TXT))
(COMMAND"TEXT" LS "" DT)
)
(COMMAND"REDRAW")
)

只看该作者 · 发表于 2011-10-18 23:57:41

(defun C:EPT (/ olds oldss olds1 stp h txt wf st x0 y0 l n yes
            TXTA TXT1 NN AR AD CL cst)
(setq olderr *error*
      *error* myerror)
(setvar "BLIPMODE" 0)
(setvar "CMDECHO" 0)
(SETQ CL (GETVAR "CLAYER"))
(setq cst (getvar "textstyle"))
(setq olds (entsel "\nSelect the string :"))
(SETQ OLDSS (CAR OLDS))
(setq olds (entget  (car  olds)))
(setq olds1 (cdr (assoc 0 olds)))
(if (= "TEXT" oldS1)
   ( progn
      (COMMAND "ERASE" (SSADD OLDSS) "")
      (COMMAND "LAYER" "S"  (CDR (ASSOC 8 OLDS)) "")
      (setq stp  (trans (cdr (assoc 10 olds)) 0 1))
      (setq h (cdr (assoc 40 olds)))
      (setq aR (cdr (assoc 50 olds)))
      (setq aD  (RTD (cdr (assoc 50 olds))))
      (setq txt (cdr (assoc 1 olds)))
      (setq wf (Cdr (assoc 41 olds)))
      (SETQ ST (CDR (ASSOC 7 OLDS)))
      (SETQ X0 (CAR STP) Y0 (CADR STP))
      (setq l (strlen txt))
      (setq n 1) (setq nn 2)
      (setq yes 1)
      (while (<= N L)
               (setq tXT1 (substr txt n 2))
               (SETQ TXTA (ASCII TXT1))
               (setq nn (cond
                        ((= TXT1 "%%") 3)
                        ((> Txta 160) 2)
                        ((< Txta 129) 1)
                        )
               )
               (setq txt1 (substr txt n nn))
               (setq n (+ n nn))
               (COMMAND "text" "S" ST stp h aD txt1)

               (IF (= NN 2)
                  (PROGN
                     (cond ((eq cst "HZ") (setq wscale 1.0625))
                           ((eq cst "HZ1")  (setq wscale 1.20))
                           ((eq cst "HZ0")  (setq wscale 1.40))
                           )
                     (SETQ X0 (+ X0 (* (cos aR)  H WF wscale)))
                     (SETQ y0 (+ Y0 (* (sin aR)  H WF wscale)))
                  )
                  (PROGN
                     (SETQ JF (COND
                                 ((= TXTA 49) 0.65)
                                 ((= TXTA 46) 0.3)
                                 (T 1)
                              )
                        )
                     (setq wf1 (* JF WF))
                     (SETQ X0 (+ X0 (* (cos aR)  H WF1)))
                     (SETQ y0 (+ Y0 (* (sin aR)  H WF1)))
                  )
               )
               (SETQ STP (LIST X0 Y0))

      )
   )
  )
(COMMAND "LAYER" "S" CL "")
  (COMMAND "text" "s" cst ^c)
(setq *error* olderr)
(princ)
)

(DEFUN C:HZFILE(/ TXT SP TH INS WD STL LS DT)
(setvar "BLIPMODE" 0)
(SETVAR "CMDECHO" 0)
(modes '("BLIPMODE" "CMDECHO"))
(graphscr)
(SETQ TXT (OPEN (GETSTRING "\n Name of Text File(WordStar): ") "r"))
(SETQ SP (GETPOINT "\n Text String Start Point :"))
(SETQ INS (GETSTRING"\n Enter Line Spacing in Drawing Units :"))
(SETQ HT (GETSTRING "\n Enter Text Height in Drawing Units :"))
(SETQ WD (GETSTRING "\n Enter Text Width Factor :"))
(princ "Please select HZ style:")
(initget 2 "Singleline-hz Doubleline-hz")
(setq hz (getstring "\nSingleline-hz/Doubleline-hz/<standard-hz>:"))
(setq pname (getvar "dwgprefix"))
(cond ((eq hz "s")  (COMMAND "STYLE" "HZ" "txt,hztxt" HT WD "" "" ""))
   ((eq hz "d")  (COMMAND "STYLE" "HZ1" "txt,hztxt1" HT WD "" "" ""))
   ((eq hz "") (COMMAND "STYLE" "HZ0" "txt,hztxt0" HT WD "" "" ""))
   (T (princ "Unknown HZ style ! Restart HZFILE COMMAND."))
   )

(SETQ DT (READ-LINE TXT))
(SETQ LS (STRCAT "@"INS"<-90"))
(COMMAND"TEXT" SP "" DT)
(WHILE (/= DT NIL)
(SETQ DT (READ-LINE TXT))
(COMMAND"TEXT" LS "" DT)
)
(COMMAND"REDRAW")
)

只看该作者 · 发表于 2011-10-18 23:58:22

(defun C:EPT (/ olds oldss olds1 stp h txt wf st x0 y0 l n yes
            TXTA TXT1 NN AR AD CL cst)
(setq olderr *error*
      *error* myerror)
(setvar "BLIPMODE" 0)
(setvar "CMDECHO" 0)
(SETQ CL (GETVAR "CLAYER"))
(setq cst (getvar "textstyle"))
(setq olds (entsel "\nSelect the string :"))
(SETQ OLDSS (CAR OLDS))
(setq olds (entget  (car  olds)))
(setq olds1 (cdr (assoc 0 olds)))
(if (= "TEXT" oldS1)
   ( progn
      (COMMAND "ERASE" (SSADD OLDSS) "")
      (COMMAND "LAYER" "S"  (CDR (ASSOC 8 OLDS)) "")
      (setq stp  (trans (cdr (assoc 10 olds)) 0 1))
      (setq h (cdr (assoc 40 olds)))
      (setq aR (cdr (assoc 50 olds)))
      (setq aD  (RTD (cdr (assoc 50 olds))))
      (setq txt (cdr (assoc 1 olds)))
      (setq wf (Cdr (assoc 41 olds)))
      (SETQ ST (CDR (ASSOC 7 OLDS)))
      (SETQ X0 (CAR STP) Y0 (CADR STP))
      (setq l (strlen txt))
      (setq n 1) (setq nn 2)
      (setq yes 1)
      (while (<= N L)
               (setq tXT1 (substr txt n 2))
               (SETQ TXTA (ASCII TXT1))
               (setq nn (cond
                        ((= TXT1 "%%") 3)
                        ((> Txta 160) 2)
                        ((< Txta 129) 1)
                        )
               )
               (setq txt1 (substr txt n nn))
               (setq n (+ n nn))
               (COMMAND "text" "S" ST stp h aD txt1)

               (IF (= NN 2)
                  (PROGN
                     (cond ((eq cst "HZ") (setq wscale 1.0625))
                           ((eq cst "HZ1")  (setq wscale 1.20))
                           ((eq cst "HZ0")  (setq wscale 1.40))
                           )
                     (SETQ X0 (+ X0 (* (cos aR)  H WF wscale)))
                     (SETQ y0 (+ Y0 (* (sin aR)  H WF wscale)))
                  )
                  (PROGN
                     (SETQ JF (COND
                                 ((= TXTA 49) 0.65)
                                 ((= TXTA 46) 0.3)
                                 (T 1)
                              )
                        )
                     (setq wf1 (* JF WF))
                     (SETQ X0 (+ X0 (* (cos aR)  H WF1)))
                     (SETQ y0 (+ Y0 (* (sin aR)  H WF1)))
                  )
               )
               (SETQ STP (LIST X0 Y0))

      )
   )
  )
(COMMAND "LAYER" "S" CL "")
  (COMMAND "text" "s" cst ^c)
(setq *error* olderr)
(princ)
)

(DEFUN C:HZFILE(/ TXT SP TH INS WD STL LS DT)
(setvar "BLIPMODE" 0)
(SETVAR "CMDECHO" 0)
(modes '("BLIPMODE" "CMDECHO"))
(graphscr)
(SETQ TXT (OPEN (GETSTRING "\n Name of Text File(WordStar): ") "r"))
(SETQ SP (GETPOINT "\n Text String Start Point :"))
(SETQ INS (GETSTRING"\n Enter Line Spacing in Drawing Units :"))
(SETQ HT (GETSTRING "\n Enter Text Height in Drawing Units :"))
(SETQ WD (GETSTRING "\n Enter Text Width Factor :"))
(princ "Please select HZ style:")
(initget 2 "Singleline-hz Doubleline-hz")
(setq hz (getstring "\nSingleline-hz/Doubleline-hz/<standard-hz>:"))
(setq pname (getvar "dwgprefix"))
(cond ((eq hz "s")  (COMMAND "STYLE" "HZ" "txt,hztxt" HT WD "" "" ""))
   ((eq hz "d")  (COMMAND "STYLE" "HZ1" "txt,hztxt1" HT WD "" "" ""))
   ((eq hz "") (COMMAND "STYLE" "HZ0" "txt,hztxt0" HT WD "" "" ""))
   (T (princ "Unknown HZ style ! Restart HZFILE COMMAND."))
   )

(SETQ DT (READ-LINE TXT))
(SETQ LS (STRCAT "@"INS"<-90"))
(COMMAND"TEXT" SP "" DT)
(WHILE (/= DT NIL)
(SETQ DT (READ-LINE TXT))
(COMMAND"TEXT" LS "" DT)
)
(COMMAND"REDRAW")
)

[原创] 请教一些LISP命令的运用

本帖子中包含更多资源