一个四轴联动Pro/NC后置处理程序！

只看该作者 · 发表于 2003-7-5 13:07:34

马上注册，结交更多同行朋友，交流，分享，学习。

您需要登录才可以下载或查看，没有帐号？注册

x

谁要法兰克0i四轴联动后置处理程序（Pro/NC）
处理的程序格式如下：
%
N10 (SIR ZCM DESIGN DEVELOPMENT)版权信息
N15 (DATE:07/05/03 08:28:48) 处理程序的时间
N20 T2
N25 M06
N30 M10
N35 G00 G54 G90 Z236.319 坐标系可以在加工参数中设置G54~G59默认为G54
N40 X-219.173 Y81.385 A-47.349
N45 G91
N50 G00 G43 Z-230.564 H2 长度补偿默认根据刀号一致可根据自己情况设置
N55 S1800 M03
N60 M08
N65 G01 Z-20. F500.
N70 X.939 Y-25.464 Z15.834
N75 G93 X.195 Y-5.192 Z1.903 A1.579 F119.94动态F值保持曲面空间加工刀具切削速度一致
N80 X.111 Y-2.76 Z1.049 A.887 F223.48
N85 X.137 Y-3.346 Z1.364 A1.038 F183.49
N90 X.127 Y-3.049 Z1.314 A.931 F200.2
N95 X.178 Y-4.207 Z1.84 A1.477 F142.49
N100 X.236 Y-4.661 Z2.051 A2.127 F123.91
N105 X.181 Y-2.631 Z1.225 A1.326 F214.18
N110 X.158 Y-1.91 Z.838 A1.519 F270.8
N115 X.143 Y-1.515 Z.651 A1.606 F316.33
N120 X.16 Y-1.444 Z.665 A1.59 F325.24
N125 X.118 Y-1.02 Z.44 A1.858 F384.86
N130 X.111 Y-.915 Z.394 A2.226 F374.92
N135 X.115 Y-.862 Z.409 A2.182 F386.78
N140 X.226 Y-1.517 Z.814 A4.682 F195.18
N145 X.106 Y-.642 Z.397 A2.541 F392.95
N150 X.107 Y-.593 Z.405 A2.485 F406.1
..................
................
N955 X-.105 Y1.564 Z-2.03 A3.665 F647.02
N960 X-.098 Y1.427 Z-2.121 A3.658 F648.51
N965 X-.091 Y1.287 Z-2.202 A3.647 F651.11
N970 X-.084 Y1.14 Z-2.273 A3.635 F654.1
N975 X-.046 Y.613 Z-1.392 A2.173 F1095.64
N980 G94 Z220.685 F9000.
N985 M09
N990 G49
N995 M05
N1000 M30
%

请联系dq_zcm@lgcx.com