APA Alcryn?2060 NC Melt-Processible Rubber
Printer friendly version
Subcategory: Elastomer, TPE; Polymer; Thermoplastic
Close Analogs: 20 Alcryn?TPEs are listed in MatWeb.
Data provided by the manufacturer.
Key Words: Chlorinated Olefin Interpolymer Alloy; Advanced Polymer Alloys; Thermoplastic Elastomer (TPE)
Material Notes:
Alcryn?is a true thermoplastic elastomer, based on a partially cross-linked, chlorinated olefin interpolymer alloy. It is designed for the manufacture of rubber parts with high productivity on thermoplastic processing equipment. 2000 series characteristics: high flow in general plastics processing; designed for injection molding; excellent for complex extrusions; not suitable for calendering; black grades have excellent weather resistance.
No vendors are listed for this material. Please click here if you are a supplier and would like information on how to add your listing to this material.
Physical Properties Metric English Comments
Density 1.12 g/cc 0.0405 lb/in?/font> ASTM D471
Viscosity 350000 cP 350000 cP at 300/s at 190癈; ASTM D3835
Mechanical Properties
Hardness, Shore A 59 59 ASTM D2240
Tensile Strength, Yield 7.9 MPa 1150 psi ASTM D412
Elongation at Break 420 % 420 % ASTM D412
Tensile Modulus 0.003 GPa 0.435 ksi ASTM D412
Flexural Modulus 0.0023 GPa 0.334 ksi In Torsion; ASTM D1043
Graves Tear Strength 28 kN/m 160 pli (Die C); ASTM D624
Taber Abrasion, mg/1000 Cycles 5 5 CS-17 Wheel, 1000g load; ASTM D3389
Compression Set 13 % 13 % 22 hr at 24癈; ASTM D395
Compression Set, Elevated Temperature 62 % 62 % 22 hr at 100癈; ASTM D395
Thermal Properties
Brittleness Temperature -85 癈 -121 癋 ASTM D746
Clash-Berg Stiffness Temperature -42 癈 -43.6 癋 69 MPa; ASTM D1043
Processing Properties
Processing Temperature 177 癈 351 癋 ASTM D3835 |
发表于 2004-3-2 13:48:38
QQ好友和群
QQ空间
腾讯微博
腾讯朋友
收藏
淘帖
赞一下！