moldfolw6.2分析出问题

只看该作者 · 发表于 2009-8-28 13:28:10

为什么moldfolw6.2分析出来的, 填充时间为13.2秒,看实际怎么才2.2秒,实分析填充时间请看附件, 怎么会时间相差这么大, 请那位大师告知一下, 现在有没有moldfolw6.2破解文件提供一份.

|-------------------------------------------------------------|
|  Time  | Volume|  Pressure | Clamp force|Flow rate|Status |
|  (s) |  (%)  | (MPa) |  (tonne) |(cm^3/s) |    |
|-------------------------------------------------------------|
| 0.62 | 12.64 |    189.01 |    14.57 | 3975.16 | V |
| 1.22 | 41.24 |    206.13 |    75.20 | 4158.31 | V |
| 1.82 | 69.80 |    219.09 |    161.30 | 4196.84 | V |
| 2.44 | 99.74 |    230.13 |    269.18 | 4213.82 | V |
| 3.01 |127.30 |    240.57 |    393.50 | 4218.84 | V |
| 3.64 |157.11 |    251.88 |    552.91 | 4216.49 | V |
| 4.21 |184.41 |    263.84 |    753.45 | 4207.90 | V |
| 4.82 |213.24 |    276.27 |    974.51 | 4220.38 | V |
| 5.42 |241.80 |    288.39 | 1215.99 | 4230.95 | V |
| 6.05 |271.54 |    301.78 | 1532.24 | 4230.60 | V |
| 6.63 |298.98 |    313.39 | 1825.91 | 4241.62 | V |
| 7.22 |327.17 |    324.73 | 2138.78 | 4255.09 | V |
| 7.83 |356.21 |    336.29 | 2479.53 | 4259.90 | V |
| 8.45 |385.67 |    347.58 | 2832.79 | 4265.93 | V |
| 9.02 |413.19 |    357.34 | 3147.62 | 4272.37 | V |
| 9.60 |440.79 |    371.47 | 3627.80 | 4259.43 | V |
|  10.20 |469.41 |    386.79 | 4147.83 | 4274.23 | V |
|  10.80 |497.28 |    411.88 | 5250.65 | 4257.78 | V |
|  11.41 |524.62 |    440.92 | 6446.77 | 4281.14 | V |
|  12.00 |549.94 |    487.11 | 8528.87 | 4291.87 | V |
|  12.61 |575.04 |    543.86 | 11565.84 | 4293.04 | V |
|  13.02 |594.03 |    549.05 | 12249.45 | 4281.49 |  V/P  |
|  13.08 |596.76 |    439.24 | 11923.24 | 1811.48 | P |
|  13.19 |599.74 |    439.24 | 11575.84 | 1878.10 | P |
|  13.20 |100.00 |    439.24 | 11573.31 | 1878.10 |Filled |
|-------------------------------------------------------------|