** WARNING 702280 ** Circuit has more than one outlet node. Using
node 25915
** WARNING 701360 ** Beam element 51205 has a very bad length/diameter ratio
** WARNING 701360 ** Beam element 51206 has a very bad length/diameter ratio
** WARNING 701360 ** Beam element 51207 has a very bad length/diameter ratio
** WARNING 701360 ** Beam element 51208 has a very bad length/diameter ratio
** WARNING 701380 ** Warnings were reported in the model
** WARNING 701360 ** Beam element 51205 has a very bad length/diameter ratio
** WARNING 701360 ** Beam element 51206 has a very bad length/diameter ratio
** WARNING 701360 ** Beam element 51207 has a very bad length/diameter ratio
** WARNING 701360 ** Beam element 51208 has a very bad length/diameter ratio
** WARNING 701380 ** Warnings were reported in the model
** WARNING 700530 ** Problem encountered in circuit with inlet node 25938 .
The continuity equation has not converged.
Convergence residual = 1.95212E-05
+---------+-------------+-----------------------+--------------+-------------+
| Inlet |Flowrate | Reynolds No. |Press. drop | Pumping |
| node |in/out | range | over | power over |
| | | | circuit | circuit |
| | (lit/min) | | (MPa) | (kW) |
+---------+-------------+-----------------------+--------------+-------------+
| 25938 | 0.82 | 10000.0 - 24876.1 | 0.0065 | 8.802e-05 |
| 25890 | 0.82 | 10000.0 - 10000.0 | 0.0009 | 1.280e-05 |
+---------+-------------+-----------------------+--------------+-------------+
Now beginning the task: Boundary Integration
Current time is: Fri Jun 06 11:07:45 2008
** WARNING 700940 ** Two elements are too close
Check element 5303 in the Part_model and element 48775 in the Part_model
** WARNING 700940 ** Two elements are too close
Check element 7010 in the Part_model and element 7026 in the Part_model
** WARNING 700940 ** Two elements are too close
Check element 7424 in the Part_model and element 7586 in the Part_model
** WARNING 700940 ** Two elements are too close
Check element 10239 in the Part_model and element 10238 in the Part_model
** WARNING 700940 ** Two elements are too close
Check element 10543 in the Part_model and element 50392 in the Part_model
** WARNING 700940 ** Two elements are too close
Check element 47566 in the Part_model and element 47568 in the Part_model
** WARNING 700940 ** Two elements are too close
Check element 48184 in the Part_model and element 10472 in the Part_model
** WARNING 700940 ** Two elements are too close
Check element 48625 in the Part_model and element 48630 in the Part_model
** WARNING 700940 ** Two elements are too close
Check element 44653 in the Part_model and element 6198 in the Part_model
** WARNING 700940 ** Two elements are too close
Check element 47420 in the Part_model and element 5431 in the Part_model
** WARNING 700940 ** Two elements are too close
Check element 5652 in the Part_model and element 44655 in the Part_model
** WARNING 700940 ** Two elements are too close
Check element 47036 in the Part_model and element 47027 in the Part_model
** WARNING 700940 ** Two elements are too close
Check element 48587 in the Part_model and element 48588 in the Part_model
Now beginning the task: Solution of equilibrium TMP field
Current time is: Fri Jun 06 11:12:35 2008
+----------+----------+----------+----------+----------+----------+----------+
|External |Cycle time|Avg temp |Avg temp |Dif temp |Dif temp |Circ temp |
|iteration | (s) |iteration |deviation |iteration |deviation |residual |
+----------+----------+----------+----------+----------+----------+----------+
| 1 | 20.000 | 11 |30.000000 | 0 | 0.000000 | 1.000000 |
| 1 | 20.000 | 8 |30.000000 | 0 | 0.000000 | 1.000000 |
| 1 | 20.000 | 8 |30.000000 | 0 | 0.000000 | 1.000000 |
| 1 | 20.000 | 8 |30.000000 | 0 | 0.000000 | 1.000000 |
| 1 | 20.000 | 8 |30.000000 | 0 | 0.000000 | 1.000000 |
发表于 2008-6-6 16:55:47
QQ好友和群
QQ空间
腾讯微博
腾讯朋友
收藏
淘帖
赞一下！
发表于 2008-6-6 23:27:57
楼主