请问这个字体怎么调大，小妹快哭了

突然就变成这样了，把工具栏都选了一遍都没用。打开a/view也是这么大的字体。
眼睛都快瞎了。怎么办啊，又没人问。只能过来发帖。
求大家告诉我这个字体怎么调大啊。

为什么没人理我.
555 就是红色框框的字啊，很小，怎么也弄不大。

这个不知道
爱莫能助

Setting Screen and Printer Fonts
You can change the font Adams/View uses to display text in a view, such as the name of a part or a note
on the screen, or to print text to a printer. The fonts available for displaying text in a view are those
available with your operating system. The fonts available for printing text are a fixed set of 12 fonts. Note
that your printer may not support all of these printer fonts. Learn about Printing Models.
To select a screen or printer font:
1. On the Settings menu, select Fonts.
The Fonts dialog box appears.
2. In the Screen Font text box, enter the name of the font you want Adams/View to use to display
text in a view. To browse for a font, right-click the text box, select Browse, and select a font.
3. Set Postscript Font to the font you want to use to print text.
4. Select OK.

通过谷歌搜索：adams font setting 的结果
下载这个文件 https://www.cadfamily.com/downlo ... rn_basics_setup.pdf

谢谢，这些我都知道，也都试过了没用，所以才着急。
而且我是开着a/car，可能碰到什么键盘了，突然就这样了。
后来打开view，也变成这样了。

我也想知道

To select a screen or printer font:
1. On the Settings menu, select Fonts.
The Fonts dialog box appears.
2. In the Screen Font text box, enter the name of the font you want Adams/View to use to display
text in a view. To browse for a font, right-click the text box, select Browse, and select a font.
3. Set Postscript Font to the font you want to use to print text.
4. Select OK.

这个问题我没遇到过，我也希望有高手指点

同意楼上8楼的回答，虽然是英文版的，应该正确，就是修改字体的大小，FONT就是字体的意思