MY MPA ANSYS2

Release Level: 6.0  
  
SD097-huer_adv  
Part Name: SD097-huer  
Material Supplier: Eastman Chemical Products  
Material Grade: Eastar PETG 6763  
Max Injection Pressure: 140.00 MPa  
Mold Temperature: 30.00 deg.C  
Melt Temperature: 265.00 deg.C  
Model Suitability: Part model was highly suitable for analysis.  
  
SD097-huer_adv  
Moldability: Your part may be difficult to fill and part quality may be unacceptable.
  
View the Confidence of Fill plot and use the Dynamic Adviser to get help on how to improve the filling of the part.  
Confidence: Medium  
Injection Time: 1.27 sec  
Injection Pressure: 124.72 MPa  
Weld Lines: Yes  
Air Traps: Yes  
Shot Volume (cavity, runner): 226.65 cu.cm ( 155.57, 71.09 )  
Filling Clamp Force: 269.33 tonne  
Packing Clamp Force Estimate @20%: ( 24.94 )MPa 198.91 tonne  
Packing Clamp Force Estimate @80%: ( 99.78 )MPa 795.62 tonne  
Packing Clamp Force Estimate @120%: ( 149.67 )MPa 1193.43 tonne  
Clamp Force Area: 781.95 sq.cm  
Cycle Time: 17.38 sec  
Warnings:  
  
我的一个零件材料为改性PETG,此零件加工要求高,产量大,但产品长期存在应力开裂问题,但我把进胶位置的零件壁厚处的从1.5MM加厚到2.5MM后,此处开列问题解决;

2

3

4

5

6

7

8

9