pm5.5中把各种加工方式分类加入右键菜单---方便

pm5.5中选用各种加工方式有时显的很罗嗦 不知各位同仁是否有同感
我将各种加工方式分类并按一定顺序自定义编辑加入右键菜单 感觉很
方便快捷 有哪位感兴趣的老兄可以跟帖

早加了！ 习惯就好！

可不可以设成快捷键啊，如果可以的话就好了。

zcmzcm wrote:
可不可以设成快捷键啊，如果可以的话就好了。

  
以后可能会有的！~

如何加，请不吝指教

本人的user_menu文件 敬请参考 以下为此文件内容:
U user_menu
T "ZHL MENU"
S
I "刷新隐藏" 1 "UNDRAW TOOL ALL UNDRAW PATTERN ALL UNDRAW BOUNDARY ALL UNDRAW FEATURESET ALL REFRESH"
S
M "粗加工"
I "偏置" 1 "IMPORT TEMPLATE ENTITY TOOLPATH D:\ZHLhome\myPTF\Offset-AreaClear-Model.ptf FORM TOOLPATH"
I "平行" 1 "IMPORT TEMPLATE ENTITY TOOLPATH D:\ZHLhome\\myPTF\Raster-AreaClear-Model.ptf FORM TOOLPATH"
I "轮廓" 1 "IMPORT TEMPLATE ENTITY TOOLPATH D:\ZHLhome\\myPTF\Profile-AreaClear-Model.ptf FORM TOOLPATH"
Z
M "精加工"
I "等高" 1 "IMPORT TEMPLATE ENTITY TOOLPATH D:\ZHLhome\myPTF\Constant-Z-Finishing.ptf FORM TOOLPATH"
I "平行" 1 "IMPORT TEMPLATE ENTITY TOOLPATH D:\ZHLhome\myPTF\Raster-Finishing.ptf FORM TOOLPATH"
I "三维偏置" 1 "IMPORT TEMPLATE ENTITY TOOLPATH D:\ZHLhome\myPTF\3D-Offset-Finishing.ptf FORM TOOLPATH"
I "参考线" 1 "IMPORT TEMPLATE ENTITY TOOLPATH D:\ZHLhome\myPTF\Pattern-Finishing.ptf FORM TOOLPATH"
I "放射线" 1 "IMPORT TEMPLATE ENTITY TOOLPATH D:\ZHLhome\myPTF\Radial-Finishing.ptf FORM TOOLPATH"
M "清角"
I "沿着" 1 "IMPORT TEMPLATE ENTITY TOOLPATH D:\ZHLhome\myPTF\Corner-Along-Finishing.ptf FORM TOOLPATH"
I "笔式" 1 "IMPORT TEMPLATE ENTITY TOOLPATH D:\ZHLhome\myPTF\Corner-Pencil-Finishing.ptf FORM TOOLPATH"
I "自动" 1 "IMPORT TEMPLATE ENTITY TOOLPATH D:\ZHLhome\myPTF\Corner-Automatic-Finishing.ptf FORM TOOLPATH"
I "缝合" 1 "IMPORT TEMPLATE ENTITY TOOLPATH D:\ZHLhome\myPTF\Corner-Stitch-Finishing.ptf FORM TOOLPATH"
I "多笔" 1 "IMPORT TEMPLATE ENTITY TOOLPATH D:\ZHLhome\myPTF\Corner-MultiPencil-Finishing.ptf FORM TOOLPATH"
Z
M "投影"
I "曲线" 1 "IMPORT TEMPLATE ENTITY TOOLPATH D:\ZHLhome\myPTF\Projection-Curve-Finishing.ptf FORM TOOLPATH"
I "直线" 1 "IMPORT TEMPLATE ENTITY TOOLPATH D:\ZHLhome\myPTF\Projection-Line-Finishing.ptf FORM TOOLPATH"
I "平面" 1 "IMPORT TEMPLATE ENTITY TOOLPATH D:\ZHLhome\myPTF\Projection-Plane-Finishing.ptf FORM TOOLPATH"
I "点" 1 "IMPORT TEMPLATE ENTITY TOOLPATH D:\ZHLhome\myPTF\Projection-Point-Finishing.ptf FORM TOOLPATH"
I "曲面" 1 "IMPORT TEMPLATE ENTITY TOOLPATH D:\ZHLhome\myPTF\Projection-Surface-Finishing.ptf FORM TOOLPATH"
Z
I "最佳等高" 1 "IMPORT TEMPLATE ENTITY TOOLPATH D:\ZHLhome\myPTF\Optimised-Constant-Z-Finishing.ptf FORM TOOLPATH"
I "嵌入线" 1 "IMPORT TEMPLATE ENTITY TOOLPATH D:\ZHLhome\myPTF\Embedded-Pattern-Finishing.ptf FORM TOOLPATH"
I "轮廓" 1 "IMPORT TEMPLATE ENTITY TOOLPATH D:\ZHLhome\myPTF\Profile-Finishing.ptf FORM TOOLPATH"
I "旋转" 1 "IMPORT TEMPLATE ENTITY TOOLPATH D:\ZHLhome\myPTF\Rotary-Finishing.ptf FORM TOOLPATH"
I "螺旋" 1 "IMPORT TEMPLATE ENTITY TOOLPATH D:\ZHLhome\myPTF\Spiral-Finishing.ptf FORM TOOLPATH"
I "SWARF" 1 "IMPORT TEMPLATE ENTITY TOOLPATH D:\ZHLhome\myPTF\Swarf-Finishing.ptf FORM TOOLPATH"
Z
I "钻孔" 1 "IMPORT TEMPLATE ENTITY TOOLPATH D:\ZHLhome\myPTF\Drilling.ptf FORM TOOLPATH"
#S
#I "ISO查看" 1 "UNDRAW TOOL ALL REFRESH ROTATE TRANSFORM ISO2"
#I "+Z查看" 1 "UNDRAW TOOL ALL REFRESH ROTATE TRANSFORM TOP"
#I "-Y查看" 1 "UNDRAW TOOL ALL REFRESH ROTATE TRANSFORM FRONT"
#I "+X查看" 1 "UNDRAW TOOL ALL REFRESH ROTATE TRANSFORM RIGHT"
#I "+Y查看" 1 "UNDRAW TOOL ALL REFRESH ROTATE TRANSFORM BACK"
#I "-X查看" 1 "UNDRAW TOOL ALL REFRESH ROTATE TRANSFORM LEFT"
S
I "之形" 1 "EDIT TOOLPATH ZIGZAG"
I "反向" 1 "EDIT TOOLPATH REVERSE"
I "反顺序" 1 "EDIT TOOLPATH REVERSE_ORDER"
S
I "缺省连接" 1 "MACRO D:\ZHLHOME\PMILL4\LEADS.MAC"  
I "圆弧连接" 1 "MACRO D:\ZHLHOME\PMILL4\ARCLEADS.MAC"
I "安全基准" 1 "EDIT SAFZ 25 EDIT STAZ 5 EDIT DATUM X 0 EDIT DATUM Y 0 EDIT DATUM Z 50 RESET TOOLPATH RAPID RESET TOOLPATH DATUM"
S
I "打开模型" 1 "IMPORT MODEL FILEOPEN"
Z
  
注意其中D:\ZHLhome\myPTF文件夹为自建文件夹 其中存放各种加工方式的.ptf文件 这些文件是从pmill中自带原文件复制过来的

以下是自定义快捷菜单效果:

zhl77586 wrote:
以下是自定义快捷菜单效果:

  
我也是像你这样 设的太深了 反而不方便了

好

zhl77586 wrote:
本人的user_menu文件 敬请参考 以下为此文件内容:  
  U user_menu  
  T "ZHL MENU"  
  S  
  I "刷新隐藏" 1 "UNDRAW TOOL ALL UNDRAW PATTERN ALL UNDRAW BOUNDARY ALL UNDRAW FEATURESET ALL REFRESH"  
  S  
  M "粗加工"  
  I "偏置" 1 "IMPORT TEMPLATE ENTITY TOOLPATH D:\ZHLhome\myPTF\Offset-AreaClear-Model.ptf FORM TOOLPATH"  
  I "平行" 1 "IMPORT TEMPLATE ENTITY TOOLPATH D:\ZHLhome\\myPTF\Raster-AreaClear-Model.ptf FORM TOOLPATH"  
  I "轮廓" 1 "IMPORT TEMPLATE ENTITY TOOLPATH D:\ZHLhome\\myPTF\Profile-AreaClear-Model.ptf FORM TOOLPATH"  
  Z  
  M "精加工"  
  I "等高" 1 "IMPORT TEMPLATE ENTITY TOOLPATH D:\ZHLhome\myPTF\Constant-Z-Finishing.ptf FORM TOOLPATH"  
  I "平行" 1 "IMPORT TEMPLATE ENTITY TOOLPATH D:\ZHLhome\myPTF\Raster-Finishing.ptf FORM TOOLPATH"  
  I "三维偏置" 1 "IMPORT TEMPLATE ENTITY TOOLPATH D:\ZHLhome\myPTF\3D-Offset-Finishing.ptf FORM TOOLPATH"  
  I "参考线" 1 "IMPORT TEMPLATE ENTITY TOOLPATH D:\ZHLhome\myPTF\Pattern-Finishing.ptf FORM TOOLPATH"  
  I "放射线" 1 "IMPORT TEMPLATE ENTITY TOOLPATH D:\ZHLhome\myPTF\Radial-Finishing.ptf FORM TOOLPATH"  
  M "清角"  
  I "沿着" 1 "IMPORT TEMPLATE ENTITY TOOLPATH D:\ZHLhome\myPTF\Corner-Along-Finishing.ptf FORM TOOLPATH"  
  I "笔式" 1 "IMPORT TEMPLATE ENTITY TOOLPATH D:\ZHLhome\myPTF\Corner-Pencil-Finishing.ptf FORM TOOLPATH"  
  I "自动" 1 "IMPORT TEMPLATE ENTITY TOOLPATH D:\ZHLhome\myPTF\Corner-Automatic-Finishing.ptf FORM TOOLPATH"  
  I "缝合" 1 "IMPORT TEMPLATE ENTITY TOOLPATH D:\ZHLhome\myPTF\Corner-Stitch-Finishing.ptf FORM TOOLPATH"  
  I "多笔" 1 "IMPORT TEMPLATE ENTITY TOOLPATH D:\ZHLhome\myPTF\Corner-MultiPencil-Finishing.ptf FORM TOOLPATH"  
  Z  
  M "投影"  
  I "曲线" 1 "IMPORT TEMPLATE ENTITY TOOLPATH D:\ZHLhome\myPTF\Projection-Curve-Finishing.ptf FORM TOOLPATH"  
  I "直线" 1 "IMPORT TEMPLATE ENTITY TOOLPATH D:\ZHLhome\myPTF\Projection-Line-Finishing.ptf FORM TOOLPATH"  
  I "平面" 1 "IMPORT TEMPLATE ENTITY TOOLPATH D:\ZHLhome\myPTF\Projection-Plane-Finishing.ptf FORM TOOLPATH"  
  I "点" 1 "IMPORT TEMPLATE ENTITY TOOLPATH D:\ZHLhome\myPTF\Projection-Point-Finishing.ptf FORM TOOLPATH"  
  I "曲面" 1 "IMPORT TEMPLATE ENTITY TOOLPATH D:\ZHLhome\myPTF\Projection-Surface-Finishing.ptf FORM TOOLPATH"  
  Z  
  I "最佳等高" 1 "IMPORT TEMPLATE ENTITY TOOLPATH D:\ZHLhome\myPTF\Optimised-Constant-Z-Finishing.ptf FORM TOOLPATH"  
  I "嵌入线" 1 "IMPORT TEMPLATE ENTITY TOOLPATH D:\ZHLhome\myPTF\Embedded-Pattern-Finishing.ptf FORM TOOLPATH"  
  I "轮廓" 1 "IMPORT TEMPLATE ENTITY TOOLPATH D:\ZHLhome\myPTF\Profile-Finishing.ptf FORM TOOLPATH"  
  I "旋转" 1 "IMPORT TEMPLATE ENTITY TOOLPATH D:\ZHLhome\myPTF\Rotary-Finishing.ptf FORM TOOLPATH"  
  I "螺旋" 1 "IMPORT TEMPLATE ENTITY TOOLPATH D:\ZHLhome\myPTF\Spiral-Finishing.ptf FORM TOOLPATH"  
  I "SWARF" 1 "IMPORT TEMPLATE ENTITY TOOLPATH D:\ZHLhome\myPTF\Swarf-Finishing.ptf FORM TOOLPATH"  
  Z  
  I "钻孔" 1 "IMPORT TEMPLATE ENTITY TOOLPATH D:\ZHLhome\myPTF\Drilling.ptf FORM TOOLPATH"  
  #S  
  #I "ISO查看" 1 "UNDRAW TOOL ALL REFRESH ROTATE TRANSFORM ISO2"  
  #I "+Z查看" 1 "UNDRAW TOOL ALL REFRESH ROTATE TRANSFORM TOP"  
  #I "-Y查看" 1 "UNDRAW TOOL ALL REFRESH ROTATE TRANSFORM FRONT"  
  #I "+X查看" 1 "UNDRAW TOOL ALL REFRESH ROTATE TRANSFORM RIGHT"  
  #I "+Y查看" 1 "UNDRAW TOOL ALL REFRESH ROTATE TRANSFORM BACK"  
  #I "-X查看" 1 "UNDRAW TOOL ALL REFRESH ROTATE TRANSFORM LEFT"  
  S  
  I "之形" 1 "EDIT TOOLPATH ZIGZAG"  
  I "反向" 1 "EDIT TOOLPATH REVERSE"  
  I "反顺序" 1 "EDIT TOOLPATH REVERSE_ORDER"  
  S  
  I "缺省连接" 1 "MACRO D:\ZHLHOME\PMILL4\LEADS.MAC"   
  I "圆弧连接" 1 "MACRO D:\ZHLHOME\PMILL4\ARCLEADS.MAC"  
  I "安全基准" 1 "EDIT SAFZ 25 EDIT STAZ 5 EDIT DATUM X 0 EDIT DATUM Y 0 EDIT DATUM Z 50 RESET TOOLPATH RAPID RESET TOOLPATH DATUM"  
  S  
  I "打开模型" 1 "IMPORT MODEL FILEOPEN"  
  Z  
  
  注意其中D:\ZHLhome\myPTF文件夹为自建文件夹 其中存放各种加工方式的.ptf文件 这些文件是从pmill中自带原文件复制过来的  

  
好，顶