! ****************************************************************************
! ** **
! ** U N I G R A P H I C S G A T E W A Y **
! ** **
! ****************************************************************************
! Initial Units - Controls which unit type will be selected for any value
! needed prior to a new part operation or loading an existing
! part. It also sets the default position of the "Units"
! toggle button on the "New Part" File Selection Dialog.
!
! Valid options are: [English, Metric]
!
UG_initialUnits: Metric
! Pick Ball Size - This option controls the default pick ball size. This
! determines the radius used by selection to identify
! candidate objects in the immediate vicinity of the
! selection cursor.
! Valid options are:
! 1 == small
! 2 == medium
! 3 == large
!
! Crosshair Display - This option controls whether or not the crosshairs are
! displayed when the selection and position-indication
! cursors are displayed.
! Valid options are: [on, off]
! Confirmation - This option allows the user to specify whether the
! selection confirmation dialog will always
! appear or only appear when the confirmation gesture is used.
! Choices are 'always' and 'gesture'.
! Default is 'always'.
! always - Always confirm
! gesture - Confirm with Ctrl-MB1
! Object Type Confirmation - This option allows the user to specify which
! types of objects should be confirmed.
! Default is 'features'.
! features - Confirm edges, faces, bodies and
! features.
! all - Confirm all types of objects. This includes
! edges, faces, bodies and features; and also
! includes all other selectable object types
! like points, curves, dimensions,
! boundaries, etc.
! PreSelection Highlighting - This option controls whether or not pre-selection
! highlighting is done during selection operations.
!
! Valid options are: [on, off]
! preSelectionDelay - This option controls the delay from the time you stop
! moving the mouse to the time a preselection is performed
! at the current cursor location.
! Smaller values will provide more "immediate" preselection
! feedback, but will result in more *frequent* preselections
! as you move the cursor around during a selection
! operation. This is therefore more suitable when working
! with geometry that is fast to select, such as most
! wireframe geometry (i.e. curves).
! Larger values allow you to move the cursor around more
! freely without incurring the expense of a preselection
! until you deliberately stop moving the cursor for the
! duration of the delay (as described below). This is
! therefore more suitable when working with geometry that
! is slower to select, such as certain types of solid
! bodies.
!
! Valid options are: 0 == No Delay; preselections will be performed
! "continuously" as the cursor is being moved around
! in the graphics window.
!
! [1..20]: "1" maps to the minimum delay required to
! properly detect that the cursor has, at least
! momentarily, stopped moving; this is generally
! around 0.02 seconds.
! "20" maps to 0.25 seconds; this is the
! maximum delay.
! All other values map to evenly distributed
! delay values between the minimum and maximum.
! Rectangle Method - This option allows the user to specify the default
! method for rectangle/polygon selection.
! Default is inside/crossing.
! Choices are: inside, outside, crossing,
! inside/crossing, outside/crossing.
!
UG_selRectangleMethod: inside/crossing
! Undo Confirmation - This option allows the user to specify whether
! a confirmation dialog should be presented prior to
! performing an Undo. The value can also be set
! under the UI Preferences dialog. Default is off.
! Valid options are: [on, off]
! on - An Undo Confirmation dialog is presented
! off - An Undo Confirmation dialog is not presented
!
UG_undoConfirmation: off
! Display Dialogs - This option allows the user to specify whether the dialogs
! should be displayed during playback.
! The value can also be set under the UI Preferences dialog.
! Default is off.
! Valid options are: [on, off]
! on - The dialogs are displayed (visible) during
! Macro playback.
! off - The dialogs are not displayed (invisible) during
! Macro playback.
!
UG_showPlaybackDialogs: off
! Record Macro Transformations: - This option allows the user to specify whether
! all the transformations should be recorded to the
! macro file. If this option is set to "off" only
! the last transformation will be recorded to the
! macro file.
! Default is off.
! Valid options are: [on, off]
! on - All the transformations will be recorded.
! off - Last transformation will be recorded only.
!
UG_macroRecordAllTransforms: off
! Font Display Mode - Controls the line font mode used to display curves.
! If set to Software Fonts, the system draws objects in
! the specified software font.
! If set to Hardware Fonts, objects are drawn using
! the fonts designed for faster Display Regeneration
! operations.
!
! Valid options are: [hardware, software]
!
UG_fontDisplayMode: hardware
! Color, Line Font and Width Assignments
!
! The following settings control the color, line font and width of objects at
! object creation time.
!
! The <object_type><Color|LineFont|Width> settings control the object creation
! color, line font and width of objects of type object_type.
!
! The object<Color|LineFont|Width> settings control the object creation color,
! line font and width of objects whose type does not have specific color,
! line font and width settings.
!
! Valid color options are: [1-216]
! ( Pre-V17 values were: blue (1), green (2), cyan (3), red (4), magenta (5),
! yellow (6), white (7), olive (8), pink (9), brown (10),
! orange (11), purple (12), dark-red (13), aquamarine (14), gray (15) )
!
! Valid line font options are: [solid, dashed, phantom, centerline, dotted,
! long_dashed, dotted_dashed]
!
! Valid width options are: [thin, normal, thick]
!
UG_objectColor: 2
UG_objectLineFont: solid
UG_objectWidth: normal
!
! Type Specific Color, Line Font and Width Assignments
!
! The following settings control the object creation color, line font and width
! of specific types of objects.
!
! Valid color options are: [default, 1-216]
! ( Pre-V17 values were: blue (1), green (2), cyan (3), red (4), magenta (5),
! yellow (6), white (7), olive (8), pink (9), brown (10),
! orange (11), purple (12), dark-red (13), aquamarine (14), gray (15) )
!
!
! Valid line font options are: [default, solid, dashed, phantom, centerline,
! dotted, long_dashed, dotted_dashed]
!
! Valid width options are: [default, thin, normal, thick]
! Point Settings
! (Note: line font and width settings are invalid for this type)
!
UG_pointColor: default
!
! Line Settings
!
UG_lineColor: default
UG_lineFont: default
UG_lineWidth: default
!
! Arc Settings
!
UG_arcColor: default
UG_arcFont: default
UG_arcWidth: default
!
! Conic Settings (i.e. Ellipse, Hyperbola, Parabola)
!
UG_conicColor: default
UG_conicFont: default
UG_conicWidth: default
!
! Spline Settings
!
UG_splineColor: default
UG_splineFont: default
UG_splineWidth: default
!
! Coordinate System Settings
! (Note: line font and width settings are invalid for this type)
!
UG_csysColor: default
!
! Solid Body Settings
!
UG_solidBodyColor: default
UG_solidBodyFont: default
UG_solidBodyWidth: default
!
! Sheet Body Settings
!
UG_sheetBodyColor: default
UG_sheetBodyFont: default
UG_sheetBodyWidth: default
!
! Plane, Datum Plane and Datum Axis Settings
! (Note: line font and width settings are invalid for these types)
!
UG_planeAndDatumColor: 14
! System Color - Controls the default system color, which governs the color
! of view names and borders, the WCS, the grid, and temporarily
! displayed items such as spline vertices, knotpoints, conehead
! vectors, asterisks in the Point Subfunction, etc.
! Also controls the color used for highlighting during selection
!
! PreSelection Color - Controls the color used for pre-selection highlighting.
!
! Handles Color - This is the color used for the display of all handles.
!
! Valid color options are: [1-216]
! ( Pre-V17 values were: blue (1), green (2), cyan (3), red (4), magenta (5),
! yellow (6), white (7), olive (8), pink (9), brown (10),
! orange (11), purple (12), dark-red (13), aquamarine (14), gray (15) )
!
UG_systemColor: 7
UG_preSelectionColor: 5
UG_handlesColor: 6
! Work Plane Emphasis - Allows objects on the work plane to be emphasized by
! dimming out objects off the work plane. Dimmed objects
! can be made non-selectable.
! Valid options for objects off work plane are
! 0 => Normal display
! 1 => dim and selectable
! 2 => dim and non-selectable
! Valid options for the dimming color are:
! [blue, green, cyan, red, magenta, yellow, white,
! olive, pink, brown, orange, purple, dark-red,
! aquamarine, gray]
!
UG_objectsOffWorkPlane: 0
UG_workPlaneDimColor: 15
! Grid Parameters - Controls the grid type and distance (spacing) between
! points when the grid is used.
!
! Valid options are: [rectangular, polar]
!
UG_gridType: rectangular
!
! Valid ranges are: [0.0 or greater]
!
UG_gridSpacingX_EU: 0.25 ! Inches
UG_gridSpacingY_EU: 0.25 ! Inches
UG_gridRadialSpacing_EU: 0.25 ! Inches
UG_gridSpacingX_MU: 6.00 ! mm
UG_gridSpacingY_MU: 6.00 ! mm
UG_gridRadialSpacing_MU: 6.00 ! mm
!
! Valid range is: [0.0 - 360.0]
!
UG_gridAngularSpacing: 15.0 ! Degrees
! Display Tolerance - Controls the display tolerance which affects the
! system's response time during Display Regeneration
! operations.
! segments approximating the curve and the actual curve.
! Larger tolerances result in faster Display Regeneration
! operations, but smaller values produce smoother curves.
!
! The default tolerance of 0.005 produces smooth curves
! when the display is initially regenerated, but can
! lead to jagged curves at high zoom scales. Update
! Display can then be used to produce smooth curves
! again.
!
! Note: The value given always results in the same
! maximum deviation, regardless of whether the part
! has metric or English units.
!
! Valid ranges are: [0.0 or greater]
!
UG_tolerance: 0.005
! Shaded display update mode - Controls what objects are updated/refaceted
! during a display update operation.
! valid ranges are visible, all, none
! visible - objects within or touching the clipped view volume will
! be updated.
! all - all objects will be updated
! none - no objects will be updated
!
! Valid options - [visible, all, none]
UG_shadedTolUpdMode: visible
! Advanced visualization display update mode - Controls what objects are updated/refaceted
! during a display update operation of advanced visualiation views. This includes.
! analysis and studio views.
! valid ranges are visible, all, none
! visible - objects within or touching the clipped view volume will
! be updated.
! all - all objects will be updated
! none - no objects will be updated
!
! Valid options - [visible, all, none]
UG_advVisTolUpdMode: visible
! Shaded display tolerance - Controls tolerance for shaded display.
! In V15, the shaded tolerance is controlled by 3 parameters,
! curve edge chord distance, surface chord distance and angular tolerance.
! The following table shows the mapping between the shaded display tolerance
! setting and the values for these parameters.
! Coarse:
! Curve edge chord distance .01
! Surface chord distance .01
! Angular Tolerance 0.0
! Standard:
! Curve edge chord distance .005
! Surface chord distance .005
! Angular Tolerance 15.0
! Fine:
! Curve edge chord distance .0005
! Surface chord distance .0025
! Angular Tolerance 6.0
! Extra Fine:
! Curve edge chord distance .0005
! Surface chord distance .001
! Angular Tolerance 6.0
! Ultra Fine:
! Curve edge chord distance .0005
! Surface chord distance .0005
! Angular Tolerance 3.0
!
! The UG_shadedTolerance customer default is used to specify the default
! shaded tolerance.
! Valid options - [coarse, standard, fine, extra fine, ultra fine, customize]
!
UG_shadedTolerance: standard
! Shaded display tolerance(edge tolerance)
!
! This customer default is used to set the facet edge tolerance for
! the "customize" shaded display tolerance setting.
! Note: This value is interpreted to be in the units
! of the part. The default value is specified in inches.
! This option controls the faceted representation by considering the
! curved edge approximation of the entity. This option has been found
! to be very useful for sealing the gaps between faces. The recommended
! value is 0.005. A smaller value results in a finer display, but also
! causes slower performance.
!
! Valid ranges are: [0.0 or greater]
!
UG_facetEdgeTol: 0.005 ! Units
! Shaded display tolerance(facet chord tolerance)
!
! This customer default is used to set the facet edge tolerance for
! the "customize" shaded display tolerance setting.
! Note: This value is interpreted to be in the units
! of the part. The default value is specified in inches.
! This option controls the faceted representation of an object by
! considering the surface approximation. This is an upper bound on
! the distance from a position on a facet to the surface.
! The recommended value is 0.005. A smaller value results in a finer
! display, but also causes slower performance.
!
! Valid ranges are: [0.0 or greater]
!
UG_facetChordTol: 0.005 !Units
! Shaded display tolerance(angle tolerance)
! This customer default is used to set the facet edge tolerance for
! the "customize" shaded display tolerance setting.
! This is an upper bound on the angular deviation between the surface normals
! at any two positions under the facet. This option has been found
! to be beneficial for faces with high curvature(sharp corners).
! The recommended setting is 3-15 degrees.
!
! Valid ranges are: [1.0 to 360.0]
UG_facetAngleTol: 15.0
! Face Analysis display tolerance -
! In V15, the face analysis tolerance is controlled by 4 parameters,
! curve edge chord distance, surface chord distance, angular tolerance and
! facet width tolerance. The following table shows
! the mapping between the analysis display tolerance setting and the values
! for these parameters.
! Coarse:
! Curve edge chord distance .01
! Surface chord distance .01
! Angular Tolerance 0.0
! Facet Width Tolerance 0.3
! Standard:
! Curve edge chord distance .005
! Surface chord distance .005
! Angular Tolerance 15.0
! Facet Width Tolerance 0.3
! Fine:
! Curve edge chord distance .0005
! Surface chord distance .0025
! Angular Tolerance 6.0
! Facet Width Tolerance 0.075
! Extra Fine:
! Curve edge chord distance .0005
! Surface chord distance .001
! Angular Tolerance 6.0
! Facet Width Tolerance 0.02
! Ultra Fine:
! Curve edge chord distance .0005
! Surface chord distance .0005
! Angular Tolerance 3.0
! Facet Width Tolerance 0.005
!
! This customer default is used to specify the default face analysis
! display tolerance.
! Valid options - [coarse, standard, fine, extra fine, ultra fine, customize]
!
UG_analysisTolerance: standard
! Analysis display tolerance(edge chord tolerance)
! This customer default is used to set the facet edge tolerance for
! the "customize" analysis display tolerance setting.
! Note: This value is interpreted to be in the units
! of the part. The default value is specified in inches.
! This option controls the faceted representation by considering the
! curved edge approximation of the entity. This option has been found
! to be very useful for sealing the gaps between faces. The recommended
! value is 0.005. A smaller value results in a finer display, but also
! causes slower performance.
!
! Valid ranges are: [0.0 or greater]
UG_analysisEdgeTol: 0.005 !Units
! Analysis display tolerance(facet chord tolerance)
! This customer default is used to set the facet edge tolerance for
! the "customize" analysis display tolerance setting.
! Note: This value is interpreted to be in the units
! of the part. The default value is specified in inches.
! This option controls the faceted representation of an object by
! considering the surface approximation. This is an upper bound on
! the distance from a position on a facet to the surface.
! The recommended value is 0.005. A smaller value results in a finer
! display, but also causes slower performance.
!
! Valid ranges are: [0.0 or greater]
UG_analysisChordTol: 0.005
! Analysis display tolerance(angle tolerance)
! This customer default is used to set the facet edge tolerance for
! the "customize" shaded display tolerance setting.
! This is an upper bound on the angular deviation between the surface normals
! at any two positions under the facet. This option has been found
! to be beneficial for faces with high curvature(sharp corners).
! The recommended setting is 3-15 degrees.
!
! Valid ranges are: [1.0 - 360.0]
UG_analysisAngleTol: 15.0
! Analysis display tolerance(facet width tolerance)
! This customer default is used to set the facet edge tolerance for
! the "customize" shaded display tolerance setting.
! This values specifies the maximum width of a facet. We have found
! this option to be necessary for reflection line display, to break
! long skinny polygons. The recommended setting is .3.
! Smaller setting results in a finer display but also causes slower
! performance.
!
! Valid ranges are: [greater than 0.0]
UG_analysisWidthTol: 0.3
! Display File - Controls the use of display files during part filing or
! retrieval.
!
! Valid options are: [on, off]
!
UG_displayFiles: off
! Fit Percentage - Controls the initial value of the Preferences ->
! Visualization -> Screen -> Fit Percentage slider.
!
! NOTE: This value is a Session variable, so that it
! is read from the customer defaults file at the start
! of each session. It is not saved with part files.
!
! Valid range is: [50, 100]
!
UG_fitPercentage: 100
! View Fitting Options - Ctrls the initial state whether to perform
! a 'Fit', 'Current Scale' or previously saved scale
! after View Orient or View Replace.
!
! NOTE: This value is a Session variable, so that it
! is read from the customer defaults file at the start
! of each session. It is not saved with part files.
!
! Valid range is: [0, 1, 2] 0 - do 'fit' after view Orient/Replace
! 1 - do nothing, keep 'current' setting
! 2 - use scale & xformation saved w/ that view
!
UG_viewFittingOption: 0
! Disable Smooth View Change - Controls the initial value of the
! Preferences -> Visualization Performance ->
! General Settings -> Disable Smooth View Change checkbox.
!
! NOTE: This value is a Session variable, so that it
! is read from the customer defaults file at the start
! of each session. It is not saved with part files.
!
! Valid range is: [1, 0] To enable or disable general view animation playback
!
UG_disableAnimation: 0
! Part file compression on save
! - Indicates whether the Parasolid portion of
! the part file should be saved compressed
!
! Valid options are: [no, yes]
!
UG_compress_part: no
! Line Font Parameters - Controls the Dash Size, Space Size and Symbol Size
! for line fonts.
! The Dash Size and the Space Size are the length
! of each space or each dash used to define the font.
! A gap or a displayed segment in a displayed line may
! be composed of multiple spaces or dashes.
! The symbol factor of each individual symbol and
! the Symbol Size determine the actual length between
! the connecting points of symbols displayed in a line.
! The Symbol Size and the symbol factor are used only
! for symbols in line font.
!
! Valid ranges are: [greater than 0.0]
!
UG_dashSize_EU: 0.05 ! inches
UG_dashSize_MU: 1.00 ! mm
UG_spaceSize_EU: 0.05 ! inches
UG_spaceSize_MU: 1.00 ! mm
UG_symbolSize_EU: 0.05 ! inches
UG_symbolSize_MU: 1.00 ! mm
! Default Symbol Font - Allows the System Manager to enter a default symbol
! font file name.
!
UG_defaultSymbolFont: ug_default.sbf
! Default Font Definition - Allows the System Manager to enter a default line
! font definition file name or file specification.
!
UG_defaultFontDefinition: UG DEFAULT
! Width Display - Controls whether or not line widths are displayed. This will
! be saved with the part.
!
! Valid options are: [on, off]
!
UG_widthDisplay: off
! Text Field Decimal Places - Controls the number of decimal places for real
! numbers in text fields and CLSF output.
!
! Valid Range is: [0 - 11]
!
UG_textFieldDecimalPlaces: 4
! Dialog Bar Decimal Places - Controls the number of decimal places for real
! numbers in text fields located in the Dialog Bar.
!
! Valid Range is: [0 - 11]
!
UG_dialogBarDecimalPlaces: 3
! Dialog Width Percent - Specifies the dialog width increase compared to the
! default width. A value of 120 indicates that the actual
! dialog width will be 20% bigger than the default width.
!
! Valid Range is: [25 - 1000]
!
UG_dialogWidthPercent: 100
! Dialog Bar Tracking: - This option allows the user to specify whether
! the system should perform tracking within the
! Dialog Bar, e.g. Updating XC, YC and ZC fields
! as the cursor moves.
!
! Valid options are: [on, off]
!
UG_dialogBarTracking: on
! Listing Window Use System Precision -
! Controls the formatting of real numbers for display in the listing
! window.
! on - Real number display will be based on the magnitude of the
! number and the number of significant digits that can be
! represented by the workstation's double precision floating
! point representation.
!
! off - the number of decimal places specified by
! UG_listingDecimalPlaces will be used for displaying real
! numbers in the listing window. If a number is large
! enough that the sum of integral digits and the specified
! number of decimal places would exceed the machine precision,
! the excess decimal places will be zero filled.
!
! Valid options are: [on, off]
!
! NOTE: Starting in V17.0, the default value for UG_listingDecimalPlaces
! is off
UG_listingUseSystemPrecision: off
! Listing Window Decimal Places -
! Controls the number of decimal places for real numbers in the listing
! window when UG_useSystemPrecision (see description above) is off.
!
! Valid Range is: [0 - 16]
!
UG_listingDecimalPlaces: 9
! Surface Grid - Sets the default value for the number of grid lines used
! in the display of sheet bodies.
!
! Valid ranges are: [0 or greater]
!
UG_surfaceGridU: 0
UG_surfaceGridV: 0
! Fillet Radius - Sets the default fillet radius.
!
! Valid range is: [0.0 or greater]
!
UG_filletRadius_EU: 0.25 ! inches
UG_filletRadius_MU: 6.00 ! mm
! Symbol Display - Controls whether the symbol display is complete or outline.
! If set to outline, the symbols (and characters) will be
! represented by the font boxes (rectangular boundaries);
! otherwise, it is the complete symbol display.
!
! Once a part has been created, the only way to change the
! symbol display option of the part is by the UG/Open GRIP
! GPA symbol SBDISP.
!
! Valid options are: [complete, outline]
!
UG_symbolDisplay: complete
! Default Plot Queue Name - This is the pqmgr (plotter) queue name that UG
! defaults to when the plot menu is pulled down. Enter the Primary plot queue
! here. Name MUST be all Upper Case: (i.e.: TEST1)
! (16 character maximum)
UG_defaultPlotQueueName:
! Default Plot Server Name - This is the hostname of the default plot queue
! server (default node to plot to). UGII_PLOT_NODE= overrides this .def file.
! (32 character maximum)
UG_defaultPlotServerName:
! The next set of parameters is used to assign plotter pen characteristics.
!
! Plot Pen Assignments by Width - Controls which plotter pen will draw objects
! at normal, thick or thin plot widths. For
! plotters with multiple pens, enter the pen
! number to be associated with each width.
!
! Valid ranges are: [0 or greater]
!
UG_plotPenAssignmentNormal: 1
UG_plotPenAssignmentThick: 2
UG_plotPenAssignmentThin: 3
! Plot Pen Assignments by Color - Controls the assignment of default plotter
! pen numbers to the available display colors.
! There are a total of 15 colors.
!
! Valid ranges are: [0 or greater]
!
UG_plotPenAssignmentBlue: 1
UG_plotPenAssignmentGreen: 2
UG_plotPenAssignmentCyan: 3
UG_plotPenAssignmentRed: 4
UG_plotPenAssignmentMagenta: 5
UG_plotPenAssignmentYellow: 6
UG_plotPenAssignmentWhite: 7
UG_plotPenAssignmentOlive: 8
UG_plotPenAssignmentPink: 9
UG_plotPenAssignmentBrown: 10
UG_plotPenAssignmentOrange: 11
UG_plotPenAssignmentPurple: 12
UG_plotPenAssignmentDarkRed: 13
UG_plotPenAssignmentAquamarine: 14
UG_plotPenAssignmentGray: 15
! Default thickness of Normal, Thick, and Thin Custom-Color Palette
! Pen Thickness Mode
!
UG_plotCustomNormal_MU: 0.250 ! Custom Thin Thickness (mm)
UG_plotCustomNormal_EU: 0.010 ! Custom Thin Thickness (inch)
UG_plotCustomThick_MU: 0.420 ! Custom Thin Thickness (mm)
UG_plotCustomThick_EU: 0.017 ! Custom Thin Thickness (inch)
UG_plotCustomThin_MU: 0.080 ! Custom Thin Thickness (mm)
UG_plotCustomThin_EU: 0.003 ! Custom Thin Thickness (inch)
! The following examples demonstrate the Custom-Color settings for the
! Blue pen:
!
! UG_plotCustomBlue_R:
! Blue RGB value for Custom-Color Palette Pen Blue
! Valid range [ 0 <= integer number <= 255 ]
!
! UG_plotCustomBlue_G:
! Green RGB value for Custom-Color Palette Pen Blue
! Valid range [ 0 <= integer number <= 255 ]
!
! UG_plotCustomBlue_B:
! Red RGB value for Custom-Color Palette Pen Blue
! Valid range [ 0 <= integer number <= 255 ]
!
! Thickness mode and User_defined thickness are defined in the following
! examples:
!
! UG_plotCustomBlue_T_Mode:
! Thickness mode for Custom-Color Palette Pen Blue
! Valid options - [ normal, thick, thin, user-defined ]
!
! UG_plotCustomBlue_T_User_MU:
! User_Defined Thickness for Custom-Color Palette Pen Blue in Metric unit
! Valid range [ 0 <= integer number <= 255 ]
!
! UG_plotCustomBlue_T_User_EU:
! User_Defined Thickness for Custom-Color Palette Pen Blue in English unit
! Valid range [ 0 <= integer number <= 255 ]
! Blue
!
UG_plotCustomBlue_R: 0 ! Red RGB Value
UG_plotCustomBlue_G: 0 ! Green RGB Value
UG_plotCustomBlue_B: 255 ! Blue RGB Value
UG_plotCustomBlue_T_Mode: normal ! Custom Default Thickness
UG_plotCustomBlue_T_User_MU: 0.250 ! Thickness (mm)
UG_plotCustomBlue_T_User_EU: 0.010 ! Thickness (inch)
!
! Green
!
UG_plotCustomGreen_R: 0 ! Red RGB Value
UG_plotCustomGreen_G: 255 ! Green RGB Value
UG_plotCustomGreen_B: 0 ! Blue RGB Value
UG_plotCustomGreen_T_Mode: normal ! Custom Default Thickness
UG_plotCustomGreen_T_User_MU: 0.250 ! Thickness (mm)
UG_plotCustomGreen_T_User_EU: 0.010 ! Thickness (inch)
!
! Cyan
!
UG_plotCustomCyan_R: 0 ! Red RGB Value
UG_plotCustomCyan_G: 255 ! Green RGB Value
UG_plotCustomCyan_B: 255 ! Blue RGB Value
UG_plotCustomCyan_T_Mode: normal ! Custom Default Thickness
UG_plotCustomCyan_T_User_MU: 0.250 ! Thickness (mm)
UG_plotCustomCyan_T_User_EU: 0.010 ! Thickness (inch)
!
! Red
!
UG_plotCustomRed_R: 255 ! Red RGB Value
UG_plotCustomRed_G: 0 ! Green RGB Value
UG_plotCustomRed_B: 0 ! Blue RGB Value
UG_plotCustomRed_T_Mode: normal ! Custom Default Thickness
UG_plotCustomRed_T_User_MU: 0.250 ! Thickness (mm)
UG_plotCustomRed_T_User_EU: 0.010 ! Thickness (inch)
!
! Magenta
!
UG_plotCustomMagenta_R: 255 ! Red RGB Value
UG_plotCustomMagenta_G: 0 ! Green RGB Value
UG_plotCustomMagenta_B: 255 ! Blue RGB Value
UG_plotCustomMagenta_T_Mode: normal ! Custom Default Thickness
UG_plotCustomMagenta_T_User_MU: 0.250 ! Thickness (mm)
UG_plotCustomMagenta_T_User_EU: 0.010 ! Thickness (inch)
!
! Yellow
!
UG_plotCustomYellow_R: 255 ! Red RGB Value
UG_plotCustomYellow_G: 255 ! Green RGB Value
UG_plotCustomYellow_B: 0 ! Blue RGB Value
UG_plotCustomYellow_T_Mode: normal ! Custom Default Thickness
UG_plotCustomYellow_T_User_MU: 0.250 ! Thickness (mm)
UG_plotCustomYellow_T_User_EU: 0.010 ! Thickness (inch)
!
! White
!
UG_plotCustomWhite_R: 0 ! Red RGB Value
UG_plotCustomWhite_G: 0 ! Green RGB Value
UG_plotCustomWhite_B: 0 ! Blue RGB Value
UG_plotCustomWhite_T_Mode: normal ! Custom Default Thickness
UG_plotCustomWhite_T_User_MU: 0.250 ! Thickness (mm)
UG_plotCustomWhite_T_User_EU: 0.010 ! Thickness (inch)
!
! Olive
!
UG_plotCustomOlive_R: 114 ! Red RGB Value
UG_plotCustomOlive_G: 132 ! Green RGB Value
UG_plotCustomOlive_B: 0 ! Blue RGB Value
UG_plotCustomOlive_T_Mode: normal ! Custom Default Thickness
UG_plotCustomOlive_T_User_MU: 0.250 ! Thickness (mm)
UG_plotCustomOlive_T_User_EU: 0.010 ! Thickness (inch)
!
! Pink
!
UG_plotCustomPink_R: 255 ! Red RGB Value
UG_plotCustomPink_G: 159 ! Green RGB Value
UG_plotCustomPink_B: 160 ! Blue RGB Value
UG_plotCustomPink_T_Mode: normal ! Custom Default Thickness
UG_plotCustomPink_T_User_MU: 0.250 ! Thickness (mm)
UG_plotCustomPink_T_User_EU: 0.010 ! Thickness (inch)
!
! Brown
!
UG_plotCustomBrown_R: 164 ! Red RGB Value
UG_plotCustomBrown_G: 99 ! Green RGB Value
UG_plotCustomBrown_B: 0 ! Blue RGB Value
UG_plotCustomBrown_T_Mode: normal ! Custom Default Thickness
UG_plotCustomBrown_T_User_MU: 0.250 ! Thickness (mm)
UG_plotCustomBrown_T_User_EU: 0.010 ! Thickness (inch)
!
! Orange
!
UG_plotCustomOrange_R: 255 ! Red RGB Value
UG_plotCustomOrange_G: 137 ! Green RGB Value
UG_plotCustomOrange_B: 0 ! Blue RGB Value
UG_plotCustomOrange_T_Mode: normal ! Custom Default Thickness
UG_plotCustomOrange_T_User_MU: 0.250 ! Thickness (mm)
UG_plotCustomOrange_T_User_EU: 0.010 ! Thickness (inch)
!
! Purple
!
UG_plotCustomPurple_R: 168 ! Red RGB Value
UG_plotCustomPurple_G: 44 ! Green RGB Value
UG_plotCustomPurple_B: 255 ! Blue RGB Value
UG_plotCustomPurple_T_Mode: normal ! Custom Default Thickness
UG_plotCustomPurple_T_User_MU: 0.250 ! Thickness (mm)
UG_plotCustomPurple_T_User_EU: 0.010 ! Thickness (inch)
!
! DarkRed
!
UG_plotCustomDarkRed_R: 203 ! Red RGB Value
UG_plotCustomDarkRed_G: 14 ! Green RGB Value
UG_plotCustomDarkRed_B: 0 ! Blue RGB Value
UG_plotCustomDarkRed_T_Mode: normal ! Custom Default Thickness
UG_plotCustomDarkRed_T_User_MU: 0.250 ! Thickness (mm)
UG_plotCustomDarkRed_T_User_EU: 0.010 ! Thickness (inch)
!
! Aquamarine
!
UG_plotCustomAquamarine_R: 17 ! Red RGB Value
UG_plotCustomAquamarine_G: 251 ! Green RGB Value
UG_plotCustomAquamarine_B: 18 ! Blue RGB Value
UG_plotCustomAquamarine_T_Mode: normal ! Custom Default Thickness
UG_plotCustomAquamarine_T_User_MU: 0.250 ! Thickness (mm)
UG_plotCustomAquamarine_T_User_EU: 0.010 ! Thickness (inch)
!
! Gray
!
UG_plotCustomGray_R: 53 ! Red RGB Value
UG_plotCustomGray_G: 53 ! Green RGB Value
UG_plotCustomGray_B: 53 ! Blue RGB Value
UG_plotCustomGray_T_Mode: normal ! Custom Default Thickness
UG_plotCustomGray_T_User_MU: 0.250 ! Thickness (mm)
UG_plotCustomGray_T_User_EU: 0.010 ! Thickness (inch)
! Plotter Origin - Controls the origin offset for the plotter. These provide
! the initial values for the Plotter Origin DX and DY coordinates
! of the Plot Origin dialog.
!
! Valid ranges are: [0.0 or greater]
!
UG_plotterOriginDX_EU: 0.0 ! Inches
UG_plotterOriginDY_EU: 0.0 ! Inches
UG_plotterOriginDX_MU: 0.0 ! mm
UG_plotterOriginDY_MU: 0.0 ! mm
! Drawing Origin for plotting - Provides the initial values for the Drawing Origin
! X and Y coordinates of the Plot Origin dialog.
!
! Valid ranges are: [0.0 or greater]
!
UG_drawingOriginX_EU: 0.0 ! Inches
UG_drawingOriginY_EU: 0.0 ! Inches
UG_drawingOriginX_MU: 0.0 ! mm
UG_drawingOriginY_MU: 0.0 ! mm
! The following are initial plotter menu settings per Customer ER's
! The settings are for initial Banner mode (needed for Grip & Ufunc),
! Plot by color or width, Plot mode drawing or display, and Plot tolerance.
! banner default state at startup; options are:
! [no_banner, default_banner, prompt_banner]
UG_bannerDefaultBanner: no_banner
! Plot by type: width, color or custom options are:
! [width, color, custom_palette]
UG_plotPenType: width
! Plot source, display or drawing. Options are:
! [display, drawing]
UG_plotSource: drawing
! Plot tolerance. This is the display tolerance for plotting.
! Range is [any real down to 0.0001] recommended max is 0.005
UG_plotTolerance: 0.001
!
! The following section contained the defaults used for plotting banners.
! These defaults are banner character size, banner origin, banner rotation,
! banner justification, and banner format.
!
! Banner Character Size - The size of the plot font used to plot the banner
! information with.
!
! Valid ranges are: [greater than 0.0]
UG_bannerCharSize_EU: 0.06 ! For non-standard drawing size (inches)
UG_bannerCharSize_MU: 1.52 ! For non-standard drawing size (mm)
UG_bannerCharSizeA_EU: 0.06 ! Drawing size ANSI A (inches)
UG_bannerCharSizeA_MU: 1.52 ! Drawing size ANSI A (mm)
UG_bannerCharSizeB_EU: 0.06 ! Drawing size ANSI B (inches)
UG_bannerCharSizeB_MU: 1.52 ! Drawing size ANSI B (mm)
UG_bannerCharSizeC_EU: 0.06 ! Drawing size ANSI C (inches)
UG_bannerCharSizeC_MU: 1.52 ! Drawing size ANSI C (mm)
UG_bannerCharSizeD_EU: 0.06 ! Drawing size ANSI D (inches)
UG_bannerCharSizeD_MU: 1.52 ! Drawing size ANSI D (mm)
UG_bannerCharSizeE_EU: 0.06 ! Drawing size ANSI E (inches)
UG_bannerCharSizeE_MU: 1.52 ! Drawing size ANSI E (mm)
UG_bannerCharSizeF_EU: 0.06 ! Drawing size ANSI F (inches)
UG_bannerCharSizeF_MU: 1.52 ! Drawing size ANSI F (mm)
UG_bannerCharSizeH_EU: 0.06 ! Drawing size ANSI H (inches)
UG_bannerCharSizeH_MU: 1.52 ! Drawing size ANSI H (mm)
UG_bannerCharSizeJ_EU: 0.06 ! Drawing size ANSI J (inches)
UG_bannerCharSizeJ_MU: 1.52 ! Drawing size ANSI J (mm)
UG_bannerCharSizeA0_EU: 0.06 ! Drawing size ISO A0 (inches)
UG_bannerCharSizeA0_MU: 1.52 ! Drawing size ISO A0 (mm)
UG_bannerCharSizeA1_EU: 0.06 ! Drawing size ISO A1 (inches)
UG_bannerCharSizeA1_MU: 1.52 ! Drawing size ISO A1 (mm)
UG_bannerCharSizeA2_EU: 0.06 ! Drawing size ISO A2 (inches)
UG_bannerCharSizeA2_MU: 1.52 ! Drawing size ISO A2 (mm)
UG_bannerCharSizeA3_EU: 0.06 ! Drawing size ISO A3 (inches)
UG_bannerCharSizeA3_MU: 1.52 ! Drawing size ISO A3 (mm)
UG_bannerCharSizeA4_EU: 0.06 ! Drawing size ISO A4 (inches)
UG_bannerCharSizeA4_MU: 1.52 ! Drawing size ISO A4 (mm)
UG_bannerCharSizeV_EU: 0.06 ! Vector display plots (inches)
UG_bannerCharSizeV_MU: 1.52 ! Vector display plots (mm)
UG_bannerCharSizeS_EU: 0.06 ! Shaded display plots (inches)
UG_bannerCharSizeS_MU: 1.52 ! Shaded display plots (mm)
! Banner Origin - Controls the origin for the banner. The banner origin
! corresponds to the plotter pen start position.
!
! Valid range is: [ any real ]
UG_bannerOrigin_X_EU: 0.0 ! For non-standard drawing size (inches)
UG_bannerOrigin_Y_EU: 0.0
UG_bannerOrigin_X_MU: 0.0 ! For non-standard drawing size (mm)
UG_bannerOrigin_Y_MU: 0.0
UG_bannerOriginA_X_EU: 10.25 ! Origin for drawing size ANSI A (inches)
UG_bannerOriginA_Y_EU: 1.0
UG_bannerOriginA_X_MU: 260.00 ! Origin for drawing size ANSI A (mm)
UG_bannerOriginA_Y_MU: 25.0
UG_bannerOriginB_X_EU: 16.25 ! Origin for drawing size ANSI B (inches)
UG_bannerOriginB_Y_EU: 1.0
UG_bannerOriginB_X_MU: 413.00 ! Origin for drawing size ANSI B (mm)
UG_bannerOriginB_Y_MU: 25.0
UG_bannerOriginC_X_EU: 21.25 ! Origin for drawing size ANSI C (inches)
UG_bannerOriginC_Y_EU: 1.0
UG_bannerOriginC_X_MU: 540.00 ! Origin for drawing size ANSI C (mm)
UG_bannerOriginC_Y_MU: 25.0
UG_bannerOriginD_X_EU: 33.25 ! Origin for drawing size ANSI D (inches)
UG_bannerOriginD_Y_EU: 1.0
UG_bannerOriginD_X_MU: 845.00 ! Origin for drawing size ANSI D (mm)
UG_bannerOriginD_Y_MU: 25.0
UG_bannerOriginE_X_EU: 43.25 ! Origin for drawing size ANSI E (inches)
UG_bannerOriginE_Y_EU: 1.0
UG_bannerOriginE_X_MU: 1099.00 ! Origin for drawing size ANSI E (mm)
UG_bannerOriginE_Y_MU: 25.0
UG_bannerOriginF_X_EU: 39.25 ! Origin for drawing size ANSI F (inches)
UG_bannerOriginF_Y_EU: 1.0
UG_bannerOriginF_X_MU: 997.00 ! Origin for drawing size ANSI F (mm)
UG_bannerOriginF_Y_MU: 25.0
UG_bannerOriginH_X_EU: 43.25 ! Origin for drawing size ANSI H (inches)
UG_bannerOriginH_Y_EU: 1.0
UG_bannerOriginH_X_MU: 1099.00 ! Origin for drawing size ANSI H (mm)
UG_bannerOriginH_Y_MU: 25.0
UG_bannerOriginJ_X_EU: 54.25 ! Origin for drawing size ANSI J (inches)
UG_bannerOriginJ_Y_EU: 1.0
UG_bannerOriginJ_X_MU: 1378.00 ! Origin for drawing size ANSI J (mm)
UG_bannerOriginJ_Y_MU: 25.0
UG_bannerOriginA0_X_EU: 45.80 ! Origin for drawing size ISO A0 (inches)
UG_bannerOriginA0_Y_EU: 1.0
UG_bannerOriginA0_X_MU: 1163.00 ! Origin for drawing size ISO A0 (mm)
UG_bannerOriginA0_Y_MU: 25.0
UG_bannerOriginA1_X_EU: 32.10 ! Origin for drawing size ISO A1 (inches)
UG_bannerOriginA1_Y_EU: 1.0
UG_bannerOriginA1_X_MU: 815.00 ! Origin for drawing size ISO A1 (mm)
UG_bannerOriginA1_Y_MU: 25.0
UG_bannerOriginA2_X_EU: 22.40 ! Origin for drawing size ISO A2 (inches)
UG_bannerOriginA2_Y_EU: 1.0
UG_bannerOriginA2_X_MU: 569.00 ! Origin for drawing size ISO A2 (mm)
UG_bannerOriginA2_Y_MU: 25.0
UG_bannerOriginA3_X_EU: 15.50 ! Origin for drawing size ISO A3 (inches)
UG_bannerOriginA3_Y_EU: 1.0
UG_bannerOriginA3_X_MU: 394.00 ! Origin for drawing size ISO A3 (mm)
UG_bannerOriginA3_Y_MU: 25.0
UG_bannerOriginA4_X_EU: 10.70 ! Origin for drawing size ISO A4 (inches)
UG_bannerOriginA4_Y_EU: 1.0
UG_bannerOriginA4_X_MU: 272.00 ! Origin for drawing size ISO A4 (mm)
UG_bannerOriginA4_Y_MU: 25.0
UG_bannerOriginV_X_EU: 10.25 ! Origin for vector display plots(inches)
UG_bannerOriginV_Y_EU: 1.0
UG_bannerOriginV_X_MU: 260.00 ! Origin for vector display plots(mm)
UG_bannerOriginV_Y_MU: 25.0
UG_bannerOriginS_X_EU: 0.0 ! Origin for shaded display plots(inches)
UG_bannerOriginS_Y_EU: 0.0
UG_bannerOriginS_X_MU: 0.0 ! Origin for shaded display plots(mm)
UG_bannerOriginS_Y_MU: 0.0
! Banner Rotation - It defines the rotation of the banner on the plot
! (counter-clockwise)
! Valid options are: [0,90,180,270]
UG_bannerRotation: 90 ! Use if drawing size is not standard
UG_bannerRotationA: 90 ! Use for drawing size ANSI A
UG_bannerRotationB: 90 ! Use for drawing size ANSI B
UG_bannerRotationC: 90 ! Use for drawing size ANSI C
UG_bannerRotationD: 90 ! Use for drawing size ANSI D
UG_bannerRotationE: 90 ! Use for drawing size ANSI E
UG_bannerRotationF: 90 ! Use for drawing size ANSI F
UG_bannerRotationH: 90 ! Use for drawing size ANSI H
UG_bannerRotationJ: 90 ! Use for drawing size ANSI J
UG_bannerRotationA0: 90 ! Use for drawing size ISO A0
UG_bannerRotationA1: 90 ! Use for drawing size ISO A1
UG_bannerRotationA2: 90 ! Use for drawing size ISO A2
UG_bannerRotationA3: 90 ! Use for drawing size ISO A3
UG_bannerRotationA4: 90 ! Use for drawing size ISO A4
UG_bannerRotationV: 90 ! Use for vector display plots
UG_bannerRotationS: 90 ! Use for shaded display plots
! Banner Justification - It defines the banner's justification on the plot
!
! Valid options are: [left,center,right]
UG_bannerJust: left ! Use if drawing size is not standard
UG_bannerJustA: left ! Use for drawing size ANSI A
UG_bannerJustB: left ! Use for drawing size ANSI B
UG_bannerJustC: left ! Use for drawing size ANSI C
UG_bannerJustD: left ! Use for drawing size ANSI D
UG_bannerJustE: left ! Use for drawing size ANSI E
UG_bannerJustF: left ! Use for drawing size ANSI F
UG_bannerJustH: left ! Use for drawing size ANSI H
UG_bannerJustJ: left ! Use for drawing size ANSI J
UG_bannerJustA0: left ! Use for drawing size ISO A0
UG_bannerJustA1: left ! Use for drawing size ISO A1
UG_bannerJustA2: left ! Use for drawing size ISO A2
UG_bannerJustA3: left ! Use for drawing size ISO A3
UG_bannerJustA4: left ! Use for drawing size ISO A4
UG_bannerJustV: left ! Use for vector display plots
UG_bannerJustS: left ! Use for shaded display plots
! Banner Format - It defines what information goes into the banner. Note
! that the banner can only have a maximum of 3 lines (rows)
! and maximum of 5 items (columns) per line. For blank
! lines or columns, set the default to blank. Also keep
! in mind that you can define 2 variables for spaces between
! any entries. One is for the trailing spaces after every
! entry get plotted and the other is for spaces which
! represent the entry's length if and only if that entry is
! left as blank. You will not get the trailing spaces if
! that entry is the last entry of the line.
!
! Valid options are: [0,1,2,3,4,...255]
UG_bannerFormatTrailingSpaces: 3 ! spaces between any entries
UG_bannerFormatEntrySpaces: 0 ! spaces represent the field's length, this
! will only be used if the entry is left
! as blank
! Valid options are: [user_name, node_name, job_name, dwg_or_view_name]
! options continue: [part_name, date, time, message, blank]
UG_bannerFormatRow1Column1: user_name ! name of user running UG
UG_bannerFormatRow1Column2: node_name ! node name that sent the plot
UG_bannerFormatRow1Column3: job_name ! job name of the plot (modifiable)
UG_bannerFormatRow1Column4: blank
UG_bannerFormatRow1Column5: blank
UG_bannerFormatRow2Column1: dwg_or_view_name ! drawing name or view name
UG_bannerFormatRow2Column2: part_name ! part name of work part (read only)
UG_bannerFormatRow2Column3: date ! time when plot was submitted
UG_bannerFormatRow2Column4: time
UG_bannerFormatRow2Column5: blank
UG_bannerFormatRow3Column1: message ! any message to go with this plot
UG_bannerFormatRow3Column2: blank
UG_bannerFormatRow3Column3: blank
UG_bannerFormatRow3Column4: blank
UG_bannerFormatRow3Column5: blank
! Initial Part Directory - Default directory to use as a filter when creating
! or opening part files.
!
UG_initialPartDir:
! Initial Grip Directory - Default directory to use as a filter when selecting
! Grip programs to run.
!
UG_initialGripDir:
! Initial User Function Directory - Default directory to use as a filter when
! selecting User Function programs to run.
!
UG_initialUFunDir:
! Initial Macro Directory - Default directory to use as a filter when
! recording and playing back macros.
!
UG_initialMacroDir:
! Initial IGES File Directory - Default directory to use as a filter
! when selecting IGES files
!
UG_initialIgsDir:
! Initial STEP File Directory - Default directory to use as a filter
! when selecting STEP files
!
UG_initialStpDir:
! Initial DXF File Directory - Default directory to use as a filter
! when selecting DXF files
!
UG_initialDxfDir:
! Initial Translator Log File Directory - Default directory to use as
! a filter when selecting
! translator log files
!
UG_initialTransLogDir:
! Default User Tools Directory - Default directory to use when
! loading User Tools defintion files.
!
UG_default_usrt_dir:
! Automatic Pattern Update Switch - Indicates the default as to whether
! or not patterns get automatically updated.
!
! Valid options are: [yes, no]
!
UG_autoPatUpdate: no
!
! Layer->Category Dialog Initial Button Settings and List Box Sizes
!
! Category List Box Size - Indicates the number of categories that will get
! displayed in the Category List Box located in the
! Layer->Settings Dialog.
!
! Valid options are: [Any integer value greater than zero such that
! UG_categoryListItems + UG_layerListItems <= MAXIMUM,
! where MAXIMUM is 17 on a 16 inch monitor, and
! 33 on a 19 inch monitor.]
!
! Suggested default for 16 inch monitor = 5
! Suggested default for 19 inch monitor = 10
!
UG_categoryListItems: 5
! Layer List Box Size - Indicates the number of layers that will get displayed
! in the Layer List Box located in the Layer->Settings
! Dialog.
!
! Valid options are: [Any integer value greater than zero such that
! UG_categoryListItems + UG_layerListItems <= MAXIMUM,
! where MAXIMUM is 17 on a 16 inch monitor, and
! 33 on a 19 inch monitor.]
!
! Suggested default for 16 inch monitor = 12
! Suggested default for 19 inch monitor = 23
!
UG_layerListItems: 12
! Initial "Layers in List" Radio Box State - Indicates the initial state of
! the "Layers in List" Radio Box
! located in the Layer->Settings
! Dialog.
!
! Valid options are: [all, selectable, objects]
!
UG_layersInList: objects
! Initial Show Object Count Toggle State - Indicates the initial state of
! the "Show Object Count" toggle
! button located in the
! Layer->Settings Dialog.
!
! Valid options are: [on, off]
!
UG_showObjectCount: off
! Initial Show Category Names Toggle State - Indicates the initial state of
! the "Show Category Names" toggle
! button located in the
! Layer->Settings Dialog.
!
! Valid options are: [on, off]
!
UG_showCategoryNames: off
! Initial Fit All before Displaying State - Indicates the initial state of
! the "Fit All before Displaying"
! toggle button located in the
! Layer->Settings Dialog.
!
! Valid options are: [on, off]
!
UG_fitAllBeforeDisplaying: off
! Dialog Filter Type - indicates the type of text filter used in UG_dialogs.
!
! Valid options are:
!
! [Simple] - Uses a simple '*' filter, as used when matching filenames
! in the filename dialogs.
!
! [Regexp] - Uses a more sophisticated regular expression filter, as
! used in Unix commands such as 'grep', or 'sed'.
!
! Note that currently the only dialog affected by this
! switch is the Expression editor
!
UG_dialogFilterType: Simple
! Macro Option - Indicates the length of a pause statement that is recorded
! into a macro file with the Macro-> ause menu item.
! The units of this option are defined in seconds.
! When a pause statement is encountered during the play back
! of a macro, the macro will temporarily pause based on the
! value indicated.
!
! Valid options are:
!
! [>0] - Pause taken in seconds during playback.
! [=0, or blank] - Use the default setting during playback.
! [<0] - Indefinite pause setting. Pause until Ok is selected
! from pause message box.
!
UG_macroPauseLength: 60
! Macro Option - This option controls the display of the information dialog
! associated with user entry points during playback. To
! prevent the display of this dialog, turn the option to off.
!
! Valid options are: [on, off]
!
UG_macroUserEntryShowInstPrompt: on
! View Options - Indicates the Spaceball's initial view option
!
! Valid options are:
!
! [rotateOnly] - Image movement restricted to rotation only
! [panZoom] - Image movement restricted to translation and zoom only
! [panRotateZoom] - No restriction on image movement
!
!
UG_sbsViewOption: panRotateZoom
! Single Axis Filter - Restricts motion to pure x, y, or z axis for maximum
! precision
!
! Valid options are: [on, off]
!
UG_sbsSingleAxisFilter: off
! Rotate About Attention Point - When on, the model is rotated about the
! attention point. When off, the model is
! rotated about the center of the view.
!
! Valid options are: [on, off]
!
UG_sbsRotateAboutAttentionPoint: off
! Spaceball Sensitivity - Indicates the sensitivity level of the spaceball
! where 1 is the least sensitive and 11 is the most
! sensitive
!
! Valid options are: [1 to 11]
!
UG_sbsSensitivity: 6
! View Options - Indicates the Magellan's initial view option
!
! Valid options are:
!
! [rotateOnly] - Image movement restricted to rotation only
! [panZoom] - Image movement restr |
发表于 2002-3-9 14:22:32
发表于 2002-3-13 22:01:56
发表于 2002-3-13 22:04:03
发表于 2002-3-14 10:17:06
